[Intel-gfx] [PATCH v10 2/6] drm/i915: Parse EDID probed modes for DRRS support
Vandana Kannan
vandana.kannan at intel.com
Fri Apr 4 13:13:00 CEST 2014
On Apr-04-2014 4:25 PM, Jani Nikula wrote:
> On Fri, 04 Apr 2014, Vandana Kannan <vandana.kannan at intel.com> wrote:
>> From: Pradeep Bhat <pradeep.bhat at intel.com>
>>
>> This patch and finds out the lowest refresh rate supported for the resolution
>> same as the fixed_mode.
>> It also checks the VBT fields to see if panel supports seamless DRRS or not.
>> Based on above data it marks whether eDP panel supports seamless DRRS or not.
>> This information is needed for supporting seamless DRRS switch for certain
>> power saving usecases. This patch is tested by enabling the DRM logs and
>> user should see whether Seamless DRRS is supported or not.
>>
>> v2: Daniel's review comments
>> Modified downclock deduction based on intel_find_panel_downclock
>>
>> v3: Chris's review comments
>> Moved edp_downclock_avail and edp_downclock to intel_panel
>>
>> v4: Jani's review comments.
>> Changed name of the enum edp_panel_type to drrs_support type.
>> Change is_drrs_supported to drrs_support of type enum drrs_support_type.
>>
>> v5: Incorporated Jani's review comments
>> Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7
>> and above.
>>
>> v6: Incorporated Chris's review comments.
>> Changed initialize to init in intel_drrs_initialize
>>
>> v7: Incorporated Jani's review comments.
>> Removed edp_downclock and edp_downclock_avail. Return NULL explicitly.
>> Make drrs_state and unnamed struct. Move Gen based check inside drrs_init.
>>
>> v8: Made changes to track PSR enable/disable throughout system use (instead
>> of just in the init sequence) for disabling/enabling DRRS. Jani's review
>> comments.
>>
>> v9: PSR tracking will be done as part of idleness detection patch. Removed
>> PSR state tracker in i915_drrs. Jani's review comments.
>>
>> v10: Added log for DRRS not supported in drrs_init
>>
>> Signed-off-by: Pradeep Bhat <pradeep.bhat at intel.com>
>> Signed-off-by: Vandana Kannan <vandana.kannan at intel.com>
>> Cc: Jani Nikula <jani.nikula at linux.intel.com>
>> ---
>> drivers/gpu/drm/i915/intel_dp.c | 45 +++++++++++++++++++++++++++++++++++++++-
>> drivers/gpu/drm/i915/intel_drv.h | 16 ++++++++++++++
>> 2 files changed, 60 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>> index e48d47c..9f110bd 100644
>> --- a/drivers/gpu/drm/i915/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>> @@ -3632,6 +3632,43 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
>> I915_READ(pp_div_reg));
>> }
>>
>> +static struct drm_display_mode *
>> +intel_dp_drrs_init(struct intel_digital_port *intel_dig_port,
>> + struct intel_connector *intel_connector,
>> + struct drm_display_mode *fixed_mode)
>> +{
>> + struct drm_connector *connector = &intel_connector->base;
>> + struct intel_dp *intel_dp = &intel_dig_port->dp;
>> + struct drm_device *dev = intel_dig_port->base.base.dev;
>> + struct drm_i915_private *dev_priv = dev->dev_private;
>> + struct drm_display_mode *downclock_mode = NULL;
>> +
>> + if (INTEL_INFO(dev)->gen <= 6) {
>> + DRM_DEBUG_KMS("DRRS supported for Gen7 and above\n");
>> + return NULL;
>> + }
>> +
>> + if (dev_priv->vbt.drrs_type == DRRS_NOT_SUPPORTED) {
>> + DRM_INFO("VBT doesn't support DRRS\n");
>> + return NULL;
>> + }
>> +
>> + downclock_mode = intel_find_panel_downclock
>> + (dev, fixed_mode, connector);
>> +
>> + if (downclock_mode != NULL &&
>> + dev_priv->vbt.drrs_type == SEAMLESS_DRRS_SUPPORT) {
>> + intel_dp->drrs_state.type = dev_priv->vbt.drrs_type;
>> +
>> + intel_dp->drrs_state.refresh_rate_type = DRRS_HIGH_RR;
>> + DRM_INFO("seamless DRRS supported for eDP panel.\n");
>> + return downclock_mode;
>> + } else {
>> + DRM_INFO("DRRS not supported\n");
>> + return NULL;
>> + }
>
> The above now leaks downclock_mode on the return NULL path. Please try
> to be more careful.
>
> Please let's try to bring this patchset and review into
> conclusion. We'll both end up frustrated otherwise.
>
> How about this instead?
>
> if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) {
> DRM_INFO("VBT doesn't support DRRS\n");
> return NULL;
> }
>
> downclock_mode = intel_find_panel_downclock(dev, fixed_mode, connector);
> if (!downclock_mode) {
> DRM_INFO("DRRS not supported\n");
> return NULL;
> }
>
> intel_dp->drrs_state.type = dev_priv->vbt.drrs_type;
> intel_dp->drrs_state.refresh_rate_type = DRRS_HIGH_RR;
> DRM_INFO("seamless DRRS supported for eDP panel.\n");
>
> return downclock_mode;
>
>
> BR,
> Jani.
>
>
Thanks.
Will make this change and resend.
-Vandana
>> +}
>> +
>> static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>> struct intel_connector *intel_connector,
>> struct edp_power_seq *power_seq)
>> @@ -3641,10 +3678,13 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>> struct drm_device *dev = intel_dig_port->base.base.dev;
>> struct drm_i915_private *dev_priv = dev->dev_private;
>> struct drm_display_mode *fixed_mode = NULL;
>> + struct drm_display_mode *downclock_mode = NULL;
>> bool has_dpcd;
>> struct drm_display_mode *scan;
>> struct edid *edid;
>>
>> + intel_dp->drrs_state.type = DRRS_NOT_SUPPORTED;
>> +
>> if (!is_edp(intel_dp))
>> return true;
>>
>> @@ -3687,6 +3727,9 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>> list_for_each_entry(scan, &connector->probed_modes, head) {
>> if ((scan->type & DRM_MODE_TYPE_PREFERRED)) {
>> fixed_mode = drm_mode_duplicate(dev, scan);
>> + downclock_mode = intel_dp_drrs_init(
>> + intel_dig_port,
>> + intel_connector, fixed_mode);
>> break;
>> }
>> }
>> @@ -3700,7 +3743,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
>> }
>> mutex_unlock(&dev->mode_config.mutex);
>>
>> - intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
>> + intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
>> intel_panel_setup_backlight(connector);
>>
>> return true;
>> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>> index 42762b7..286d4fb 100644
>> --- a/drivers/gpu/drm/i915/intel_drv.h
>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>> @@ -482,6 +482,17 @@ struct intel_hdmi {
>>
>> #define DP_MAX_DOWNSTREAM_PORTS 0x10
>>
>> +/**
>> + * HIGH_RR is the highest eDP panel refresh rate read from EDID
>> + * LOW_RR is the lowest eDP panel refresh rate found from EDID
>> + * parsing for same resolution.
>> + */
>> +enum edp_drrs_refresh_rate_type {
>> + DRRS_HIGH_RR,
>> + DRRS_LOW_RR,
>> + DRRS_MAX_RR, /* RR count */
>> +};
>> +
>> struct intel_dp {
>> uint32_t output_reg;
>> uint32_t aux_ch_ctl_reg;
>> @@ -520,6 +531,11 @@ struct intel_dp {
>> bool has_aux_irq,
>> int send_bytes,
>> uint32_t aux_clock_divider);
>> + struct {
>> + enum drrs_support_type type;
>> + enum edp_drrs_refresh_rate_type refresh_rate_type;
>> + } drrs_state;
>> +
>> };
>>
>> struct intel_digital_port {
>> --
>> 1.9.1
>>
>
More information about the Intel-gfx
mailing list