[Intel-gfx] Fujitsu S6010 still woes (partially)
Thomas Richter
richter at rus.uni-stuttgart.de
Tue Apr 8 11:48:14 CEST 2014
Hi Daniel, dear intel-experts,
again I had the chance to test the latest intel-drm-nightly of the
3.14.0 kernel on the Siemens S6010 with its dreadful nso2501 DVO.
Unfortunately, there are still a couple of issues here, and I also want
to report on some progress and some workarounds.
1) Panning on the i830 still flickers, reproducible both on the Fujitsu
S6010 and the IBM R31. The problem is all again the same, namely that
the watermark is set too low (or too high, if you like). The
intel_calculate_wm() function in intel_pm.c returns a watermark level of
0 for the nominal display configuration (1024x768), which is just too
high. The maximum allowable watermark should be 8. I already submitted a
patch for this problem, though unfortunately, it had not been accepted.
Folks, could we *please* fix this issue? It is really trivial, and it
really causes crashes if a video overlay is on the panning screen -
thus, this is more than just a cosmetic fix.
2) Pipe_A quirk: Actually, this is not required or needed on the S6010
nor on the R31. In fact, it breaks more than it fixes. The problem is
that the pipe A quirk causes the boot console to be misaligned with the
screen, or to be completely blank. This is undesirable if you boot into
maintenance mode (i.e. without an X interface). Just disabling the quirk
avoids this problem in a wonderful way.
3) Suspend to RAM: Whether with or without the quirk, s2ram is
non-functioning, but *almost* functioning. The problem on the S6010 is
again the ns2501. Unfortunately, I do not know which of the intel
functions are called on resume in which order, but it seems to me that
the DVO is reprogrammed *before* the pipes and plls are reconfigured.
Unfortunately, this cannot work with the ns2501. It requires proper PLL
configuration for even receiving commands on the i2c bus, otherwise it
locks up. Thus, it would be helpful to know which functions the intel
driver runs through for resuming the display, maybe I would have then
the chance to dig more into this.
Everything else in the resume works, and one can an "almost working"
resume by reprogramming the PLLs on resume by the intel-gpu-tools and
calling a small script on resume:
intel_reg_write 0x02120 0x0
intel_reg_write 0x61100 0x00000c00
intel_reg_write 0x61160 0x10004084
intel_reg_write 0x6101c 0x027f01df
intel_reg_write 0x61000 0x031f027f
intel_reg_write 0x61004 0x03170287
intel_reg_write 0x61008 0x02ef028f
intel_reg_write 0x6100c 0x020c01df
intel_reg_write 0x61010 0x020401e7
intel_reg_write 0x61014 0x01eb01e9
intel_reg_write 0x71180 0x01000000
intel_reg_write 0x70188 0x00001000
intel_reg_write 0x20d8 0x10E0108
intel_reg_write 0x20dc 0x102
intel_reg_write 0x61120 0x0
intel_reg_write 0x6014 0xD0820000
intel_reg_write 0x6018 0x0
intel_reg_write 0x61140 0x80004084
intel_reg_write 0x61160 0x90004084
This will give back a workable display, though with a couple of
hick-ups. That is, on suspend, switch to the console (here also at
1024x768 resolution), then suspend. On resume, run the above script,
then switch back to X.
What is interesting is that the resume functionality seems to program
the pipes differently. Resume tries to feed the display through pipe A,
however, the DVO for the internal display is on pipe B. Here is the
register dump before and after the resume:
/* before */
DCC: 0x00000000 (0000ÿÿÿÿôÏ~·Zx·)
CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1
enh disabled, ch0 enh disabled, flex disabled, ep not present)
C0DRB0: 0x00000000 (0x0000)
C0DRB1: 0x00000000 (0x0000)
C0DRB2: 0x00000000 (0x0000)
C0DRB3: 0x00000000 (0x0000)
C1DRB0: 0x00000000 (0x0000)
C1DRB1: 0x00000000 (0x0000)
C1DRB2: 0x00000000 (0x0000)
C1DRB3: 0x00000000 (0x0000)
C0DRA01: 0x00000000 (0x0000)
C0DRA23: 0x00000000 (0x0000)
C1DRA01: 0x00000000 (0x0000)
C1DRA23: 0x00000000 (0x0000)
PGETBL_CTL: 0x3ff60001
VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1
p1 = 10, p2 = 4)
DPLL_TEST: 0x00000000 (, DPLLA input buffer
disabled, DPLLB input buffer disabled)
CACHE_MODE_0: 0x00000000
D_STATE: 0x00000000
DSPCLK_GATE_D: 0x00000008 (clock gates disabled: OVRUNIT)
RENCLK_GATE_D1: 0x00000000
RENCLK_GATE_D2: 0x00000000
SDVOB: 0x80004084 (enabled, pipe A, stall
disabled, detected)
SDVOC: 0x90004084 (enabled, pipe A, stall
disabled, detected)
SDVOUDI: 0x00000000
DSPARB: 0x00017e5f
DSPFW1: 0x00000000
DSPFW2: 0x00000000
DSPFW3: 0x00000000
ADPA: 0x00000c00 (disabled, pipe A, -hsync,
-vsync)
LVDS: 0x00000000 (disabled, pipe A, 18 bit, 1
channel)
DVOA: 0x00000000 (disabled, pipe A, no stall,
-hsync, -vsync)
DVOB: 0x80004084 (enabled, pipe A, no stall,
-hsync, -vsync)
DVOC: 0x90004084 (enabled, pipe A, stall,
-hsync, -vsync)
DVOA_SRCDIM: 0x00000000
DVOB_SRCDIM: 0x00000000
DVOC_SRCDIM: 0x00000000
BLC_PWM_CTL: 0x00000000
BLC_PWM_CTL2: 0x00000000
PP_CONTROL: 0x00000000 (power target: off)
PP_STATUS: 0x00000000 (off, not ready, sequencing
idle)
PP_ON_DELAYS: 0x00000000
PP_OFF_DELAYS: 0x00000000
PP_DIVISOR: 0x00000000
PFIT_CONTROL: 0x00000000
PFIT_PGM_RATIOS: 0x00000000
PORT_HOTPLUG_EN: 0x00000000
PORT_HOTPLUG_STAT: 0x00000000
DSPACNTR: 0x98000000 (enabled, pipe A)
DSPASTRIDE: 0x00002000 (8192 bytes)
DSPAPOS: 0x00000000 (0, 0)
DSPASIZE: 0x02ff03ff (1024, 768)
DSPABASE: 0x03000000
DSPASURF: 0x00000000
DSPATILEOFF: 0x00000000
PIPEACONF: 0x80000000 (enabled, single-wide)
PIPEASRC: 0x03ff02ff (1024, 768)
PIPEASTAT: 0x10000207 (status: CRC_DONE_ENABLE
VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
PIPEA_GMCH_DATA_M: 0x00000000
PIPEA_GMCH_DATA_N: 0x00000000
PIPEA_DP_LINK_M: 0x00000000
PIPEA_DP_LINK_N: 0x00000000
CURSOR_A_BASE: 0x36b88000
CURSOR_A_CONTROL: 0x04000027
CURSOR_A_POSITION: 0x0090010b
FPA0: 0x0004150d (n = 4, m1 = 21, m2 = 13)
FPA1: 0x0004150d (n = 4, m1 = 21, m2 = 13)
DPLL_A: 0xd0820000 (enabled, dvo, default
clock, DAC/serial mode, p1 = 4, p2 = 4)
DPLL_A_MD: 0x00000000
HTOTAL_A: 0x053f03ff (1024 active, 1344 total)
HBLANK_A: 0x053f03ff (1024 start, 1344 end)
HSYNC_A: 0x049f0417 (1048 start, 1184 end)
VTOTAL_A: 0x032502ff (768 active, 806 total)
VBLANK_A: 0x032502ff (768 start, 806 end)
VSYNC_A: 0x03080302 (771 start, 777 end)
BCLRPAT_A: 0x00000000
VSYNCSHIFT_A: 0x00000000
DSPBCNTR: 0x01000000 (disabled, pipe B)
DSPBSTRIDE: 0x00000000 (0 bytes)
DSPBPOS: 0x00000000 (0, 0)
DSPBSIZE: 0x00000000 (1, 1)
DSPBBASE: 0x00000000
DSPBSURF: 0x00000000
DSPBTILEOFF: 0x00000000
PIPEBCONF: 0x00000000 (disabled, single-wide)
PIPEBSRC: 0x027f01df (640, 480)
PIPEBSTAT: 0x10000000 (status: CRC_DONE_ENABLE)
PIPEB_GMCH_DATA_M: 0x00000000
PIPEB_GMCH_DATA_N: 0x00000000
PIPEB_DP_LINK_M: 0x00000000
PIPEB_DP_LINK_N: 0x00000000
CURSOR_B_BASE: 0x00000000
CURSOR_B_CONTROL: 0x00000000
CURSOR_B_POSITION: 0x00000000
FPB0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
DPLL_B: 0x00000000 (disabled, non-dvo, VGA,
default clock, DAC/serial mode, p1 = 2, p2 = 2)
DPLL_B_MD: 0x00000000
HTOTAL_B: 0x031f027f (640 active, 800 total)
HBLANK_B: 0x03170287 (648 start, 792 end)
HSYNC_B: 0x02ef028f (656 start, 752 end)
VTOTAL_B: 0x020c01df (480 active, 525 total)
VBLANK_B: 0x020401e7 (488 start, 517 end)
VSYNC_B: 0x01eb01e9 (490 start, 492 end)
BCLRPAT_B: 0x00000000
VSYNCSHIFT_B: 0x00000000
VCLK_DIVISOR_VGA0: 0x00021207
VCLK_DIVISOR_VGA1: 0x00031406
VCLK_POST_DIV: 0x0000888b
VGACNTRL: 0x80000000 (disabled)
TV_CTL: 0x00000000
TV_DAC: 0x00000000
TV_CSC_Y: 0x00000000
TV_CSC_Y2: 0x00000000
TV_CSC_U: 0x00000000
TV_CSC_U2: 0x00000000
TV_CSC_V: 0x00000000
TV_CSC_V2: 0x00000000
TV_CLR_KNOBS: 0x00000000
TV_CLR_LEVEL: 0x00000000
TV_H_CTL_1: 0x00000000
TV_H_CTL_2: 0x00000000
TV_H_CTL_3: 0x00000000
TV_V_CTL_1: 0x00000000
TV_V_CTL_2: 0x00000000
TV_V_CTL_3: 0x00000000
TV_V_CTL_4: 0x00000000
TV_V_CTL_5: 0x00000000
TV_V_CTL_6: 0x00000000
TV_V_CTL_7: 0x00000000
TV_SC_CTL_1: 0x00000000
TV_SC_CTL_2: 0x00000000
TV_SC_CTL_3: 0x00000000
TV_WIN_POS: 0x00000000
TV_WIN_SIZE: 0x00000000
TV_FILTER_CTL_1: 0x00000000
TV_FILTER_CTL_2: 0x00000000
TV_FILTER_CTL_3: 0x00000000
TV_CC_CONTROL: 0x00000000
TV_CC_DATA: 0x00000000
TV_H_LUMA_0: 0x00000000
TV_H_LUMA_59: 0x00000000
TV_H_CHROMA_0: 0x00000000
TV_H_CHROMA_59: 0x00000000
FBC_CFB_BASE: 0x00000000
FBC_LL_BASE: 0x00000000
FBC_CONTROL: 0x00000000
FBC_COMMAND: 0x00000000
FBC_STATUS: 0x00000000
FBC_CONTROL2: 0x00000000
FBC_FENCE_OFF: 0x00000000
FBC_MOD_NUM: 0x00000000
MI_MODE: 0x00000000
MI_ARB_STATE: 0x00000000
MI_RDRET_STATE: 0x00000000
ECOSKPD: 0x00000307
DP_B: 0x00000000
DPB_AUX_CH_CTL: 0x00000000
DPB_AUX_CH_DATA1: 0x00000000
DPB_AUX_CH_DATA2: 0x00000000
DPB_AUX_CH_DATA3: 0x00000000
DPB_AUX_CH_DATA4: 0x00000000
DPB_AUX_CH_DATA5: 0x00000000
DP_C: 0x00000000
DPC_AUX_CH_CTL: 0x00000000
DPC_AUX_CH_DATA1: 0x00000000
DPC_AUX_CH_DATA2: 0x00000000
DPC_AUX_CH_DATA3: 0x00000000
DPC_AUX_CH_DATA4: 0x00000000
DPC_AUX_CH_DATA5: 0x00000000
DP_D: 0x00000000
DPD_AUX_CH_CTL: 0x00000000
DPD_AUX_CH_DATA1: 0x00000000
DPD_AUX_CH_DATA2: 0x00000000
DPD_AUX_CH_DATA3: 0x00000000
DPD_AUX_CH_DATA4: 0x00000000
DPD_AUX_CH_DATA5: 0x00000000
AUD_CONFIG: 0x00000000
AUD_HDMIW_STATUS: 0x00000000
AUD_CONV_CHCNT: 0x00000000
VIDEO_DIP_CTL: 0x00000000
AUD_PINW_CNTR: 0x00000000
AUD_CNTL_ST: 0x00000000
AUD_PIN_CAP: 0x00000000
AUD_PINW_CAP: 0x00000000
AUD_PINW_UNSOLRESP: 0x00000000
AUD_OUT_DIG_CNVT: 0x00000000
AUD_OUT_CWCAP: 0x00000000
AUD_GRP_CAP: 0x00000000
FENCE 0: 0x00400131 (enabled, X tiled, 4096
pitch, 0x00400000 - 0x00600000 (2048kb))
FENCE 1: 0x00000000 (disabled)
FENCE 2: 0x01400351 (enabled, X tiled, 16384
pitch, 0x01400000 - 0x01c00000 (8192kb))
FENCE 3: 0x03000561 (enabled, X tiled, 32768
pitch, 0x03000000 - 0x05000000 (32768kb))
FENCE 4: 0x02000561 (enabled, X tiled, 32768
pitch, 0x02000000 - 0x04000000 (32768kb))
FENCE 5: 0x00000000 (disabled)
FENCE 6: 0x00000000 (disabled)
FENCE 7: 0x00000000 (disabled)
FENCE 8: 0x00000000 (disabled)
FENCE 9: 0x00000000 (disabled)
FENCE 10: 0x00000000 (disabled)
FENCE 11: 0x00000000 (disabled)
FENCE 12: 0x00000048 (disabled)
FENCE 13: 0x00000002 (disabled)
FENCE 14: 0x00000000 (disabled)
FENCE 15: 0x00000000 (disabled)
FENCE START 0: 0x00000000 (disabled)
FENCE END 0: 0x00000000 (disabled)
FENCE START 1: 0x00000000 (disabled)
FENCE END 1: 0x00000000 (disabled)
FENCE START 2: 0x00000048 (disabled)
FENCE END 2: 0x00000002 (disabled)
FENCE START 3: 0x00000000 (disabled)
FENCE END 3: 0x00000000 (disabled)
FENCE START 4: 0x00000000 (disabled)
FENCE END 4: 0x00000000 (disabled)
FENCE START 5: 0x00000000 (disabled)
FENCE END 5: 0x00000000 (disabled)
FENCE START 6: 0x00000000 (disabled)
FENCE END 6: 0x00000000 (disabled)
FENCE START 7: 0x00000000 (disabled)
FENCE END 7: 0x00000000 (disabled)
FENCE START 8: 0x00000000 (disabled)
FENCE END 8: 0x00000000 (disabled)
FENCE START 9: 0x00000000 (disabled)
FENCE END 9: 0x00000000 (disabled)
FENCE START 10: 0x00000000 (disabled)
FENCE END 10: 0x00000000 (disabled)
FENCE START 11: 0x00000000 (disabled)
FENCE END 11: 0x00000000 (disabled)
FENCE START 12: 0x00000000 (disabled)
FENCE END 12: 0x00000000 (disabled)
FENCE START 13: 0x00000000 (disabled)
FENCE END 13: 0x00000000 (disabled)
FENCE START 14: 0x00000000 (disabled)
FENCE END 14: 0x00000000 (disabled)
FENCE START 15: 0x00000000 (disabled)
FENCE END 15: 0x00000000 (disabled)
INST_PM: 0x00000000
pipe A dot 65000 n 4 m1 21 m2 13 p1 4 p2 4
pipe B dot 327000 n 2 m1 18 m2 7 p1 2 p2 2
/* and after */
DCC: 0x00000000 (0000ÿÿÿÿô|·Z³u·)
CHDECMISC: 0x00000000 (none, ch2 enh disabled, ch1
enh disabled, ch0 enh disabled, flex disabled, ep not present)
C0DRB0: 0x00000000 (0x0000)
C0DRB1: 0x00000000 (0x0000)
C0DRB2: 0x00000000 (0x0000)
C0DRB3: 0x00000000 (0x0000)
C1DRB0: 0x00000000 (0x0000)
C1DRB1: 0x00000000 (0x0000)
C1DRB2: 0x00000000 (0x0000)
C1DRB3: 0x00000000 (0x0000)
C0DRA01: 0x00000000 (0x0000)
C0DRA23: 0x00000000 (0x0000)
C1DRA01: 0x00000000 (0x0000)
C1DRA23: 0x00000000 (0x0000)
PGETBL_CTL: 0x3ff60001
VCLK_DIVISOR_VGA0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
VCLK_POST_DIV: 0x0000888b (vga0 p1 = 13, p2 = 4, vga1
p1 = 10, p2 = 4)
DPLL_TEST: 0x00000000 (, DPLLA input buffer
disabled, DPLLB input buffer disabled)
CACHE_MODE_0: 0x001f0000
D_STATE: 0x00000000
DSPCLK_GATE_D: 0x00000008 (clock gates disabled: OVRUNIT)
RENCLK_GATE_D1: 0x00000000
RENCLK_GATE_D2: 0x00000000
SDVOB: 0x80004084 (enabled, pipe A, stall
disabled, detected)
SDVOC: 0x90004084 (enabled, pipe A, stall
disabled, detected)
SDVOUDI: 0x00000000
DSPARB: 0x00017e5f
DSPFW1: 0x00000000
DSPFW2: 0x00000000
DSPFW3: 0x00000000
ADPA: 0x00000000 (disabled, pipe A, -hsync,
-vsync)
LVDS: 0x00000000 (disabled, pipe A, 18 bit, 1
channel)
DVOA: 0x00000000 (disabled, pipe A, no stall,
-hsync, -vsync)
DVOB: 0x80004084 (enabled, pipe A, no stall,
-hsync, -vsync)
DVOC: 0x90004084 (enabled, pipe A, stall,
-hsync, -vsync)
DVOA_SRCDIM: 0x00000000
DVOB_SRCDIM: 0x00000000
DVOC_SRCDIM: 0x00000000
BLC_PWM_CTL: 0x00000000
BLC_PWM_CTL2: 0x00000000
PP_CONTROL: 0x00000000 (power target: off)
PP_STATUS: 0x00000000 (off, not ready, sequencing
idle)
PP_ON_DELAYS: 0x00000000
PP_OFF_DELAYS: 0x00000000
PP_DIVISOR: 0x00000000
PFIT_CONTROL: 0x00000000
PFIT_PGM_RATIOS: 0x00000000
PORT_HOTPLUG_EN: 0x00000000
PORT_HOTPLUG_STAT: 0x00000000
DSPACNTR: 0x98000000 (enabled, pipe A)
DSPASTRIDE: 0x00002000 (8192 bytes)
DSPAPOS: 0x00000000 (0, 0)
DSPASIZE: 0x02ff03ff (1024, 768)
DSPABASE: 0x03000000
DSPASURF: 0x00000000
DSPATILEOFF: 0x00000000
PIPEACONF: 0x80000000 (enabled, single-wide)
PIPEASRC: 0x03ff02ff (1024, 768)
PIPEASTAT: 0x10000207 (status: CRC_DONE_ENABLE
VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS)
PIPEA_GMCH_DATA_M: 0x00000000
PIPEA_GMCH_DATA_N: 0x00000000
PIPEA_DP_LINK_M: 0x00000000
PIPEA_DP_LINK_N: 0x00000000
CURSOR_A_BASE: 0x36b88000
CURSOR_A_CONTROL: 0x04000027
CURSOR_A_POSITION: 0x00040007
FPA0: 0x0004150d (n = 4, m1 = 21, m2 = 13)
FPA1: 0x0004150d (n = 4, m1 = 21, m2 = 13)
DPLL_A: 0xd0820000 (enabled, dvo, default
clock, DAC/serial mode, p1 = 4, p2 = 4)
DPLL_A_MD: 0x00000000
HTOTAL_A: 0x053f03ff (1024 active, 1344 total)
HBLANK_A: 0x053f03ff (1024 start, 1344 end)
HSYNC_A: 0x049f0417 (1048 start, 1184 end)
VTOTAL_A: 0x032502ff (768 active, 806 total)
VBLANK_A: 0x032502ff (768 start, 806 end)
VSYNC_A: 0x03080302 (771 start, 777 end)
BCLRPAT_A: 0x00000000
VSYNCSHIFT_A: 0x00000000
DSPBCNTR: 0x00000000 (disabled, pipe A)
DSPBSTRIDE: 0x00000000 (0 bytes)
DSPBPOS: 0x00000000 (0, 0)
DSPBSIZE: 0x00000000 (1, 1)
DSPBBASE: 0x00000000
DSPBSURF: 0x00000000
DSPBTILEOFF: 0x00000000
PIPEBCONF: 0x00000000 (disabled, single-wide)
PIPEBSRC: 0x00000000 (1, 1)
PIPEBSTAT: 0x10000004 (status: CRC_DONE_ENABLE
SVBLANK_INT_STATUS)
PIPEB_GMCH_DATA_M: 0x00000000
PIPEB_GMCH_DATA_N: 0x00000000
PIPEB_DP_LINK_M: 0x00000000
PIPEB_DP_LINK_N: 0x00000000
CURSOR_B_BASE: 0x00000000
CURSOR_B_CONTROL: 0x00000000
CURSOR_B_POSITION: 0x00000000
FPB0: 0x00021207 (n = 2, m1 = 18, m2 = 7)
FPB1: 0x00021207 (n = 2, m1 = 18, m2 = 7)
DPLL_B: 0x00000000 (disabled, non-dvo, VGA,
default clock, DAC/serial mode, p1 = 2, p2 = 2)
DPLL_B_MD: 0x00000000
HTOTAL_B: 0x00000000 (1 active, 1 total)
HBLANK_B: 0x00000000 (1 start, 1 end)
HSYNC_B: 0x00000000 (1 start, 1 end)
VTOTAL_B: 0x00000000 (1 active, 1 total)
VBLANK_B: 0x00000000 (1 start, 1 end)
VSYNC_B: 0x00000000 (1 start, 1 end)
BCLRPAT_B: 0x00000000
VSYNCSHIFT_B: 0x00000000
VCLK_DIVISOR_VGA0: 0x00021207
VCLK_DIVISOR_VGA1: 0x00031406
VCLK_POST_DIV: 0x0000888b
VGACNTRL: 0x80000000 (disabled)
TV_CTL: 0x00000000
TV_DAC: 0x00000000
TV_CSC_Y: 0x00000000
TV_CSC_Y2: 0x00000000
TV_CSC_U: 0x00000000
TV_CSC_U2: 0x00000000
TV_CSC_V: 0x00000000
TV_CSC_V2: 0x00000000
TV_CLR_KNOBS: 0x00000000
TV_CLR_LEVEL: 0x00000000
TV_H_CTL_1: 0x00000000
TV_H_CTL_2: 0x00000000
TV_H_CTL_3: 0x00000000
TV_V_CTL_1: 0x00000000
TV_V_CTL_2: 0x00000000
TV_V_CTL_3: 0x00000000
TV_V_CTL_4: 0x00000000
TV_V_CTL_5: 0x00000000
TV_V_CTL_6: 0x00000000
TV_V_CTL_7: 0x00000000
TV_SC_CTL_1: 0x00000000
TV_SC_CTL_2: 0x00000000
TV_SC_CTL_3: 0x00000000
TV_WIN_POS: 0x00000000
TV_WIN_SIZE: 0x00000000
TV_FILTER_CTL_1: 0x00000000
TV_FILTER_CTL_2: 0x00000000
TV_FILTER_CTL_3: 0x00000000
TV_CC_CONTROL: 0x00000000
TV_CC_DATA: 0x00000000
TV_H_LUMA_0: 0x00000000
TV_H_LUMA_59: 0x00000000
TV_H_CHROMA_0: 0x00000000
TV_H_CHROMA_59: 0x00000000
FBC_CFB_BASE: 0x00000000
FBC_LL_BASE: 0x00000000
FBC_CONTROL: 0x00000000
FBC_COMMAND: 0x00000000
FBC_STATUS: 0x00000000
FBC_CONTROL2: 0x00000000
FBC_FENCE_OFF: 0x00000000
FBC_MOD_NUM: 0x00000000
MI_MODE: 0x00000000
MI_ARB_STATE: 0x00000000
MI_RDRET_STATE: 0x00000000
ECOSKPD: 0x00000307
DP_B: 0x00000000
DPB_AUX_CH_CTL: 0x00000000
DPB_AUX_CH_DATA1: 0x00000000
DPB_AUX_CH_DATA2: 0x00000000
DPB_AUX_CH_DATA3: 0x00000000
DPB_AUX_CH_DATA4: 0x00000000
DPB_AUX_CH_DATA5: 0x00000000
DP_C: 0x00000000
DPC_AUX_CH_CTL: 0x00000000
DPC_AUX_CH_DATA1: 0x00000000
DPC_AUX_CH_DATA2: 0x00000000
DPC_AUX_CH_DATA3: 0x00000000
DPC_AUX_CH_DATA4: 0x00000000
DPC_AUX_CH_DATA5: 0x00000000
DP_D: 0x00000000
DPD_AUX_CH_CTL: 0x00000000
DPD_AUX_CH_DATA1: 0x00000000
DPD_AUX_CH_DATA2: 0x00000000
DPD_AUX_CH_DATA3: 0x00000000
DPD_AUX_CH_DATA4: 0x00000000
DPD_AUX_CH_DATA5: 0x00000000
AUD_CONFIG: 0x00000000
AUD_HDMIW_STATUS: 0x00000000
AUD_CONV_CHCNT: 0x00000000
VIDEO_DIP_CTL: 0x00000000
AUD_PINW_CNTR: 0x00000000
AUD_CNTL_ST: 0x00000000
AUD_PIN_CAP: 0x00000000
AUD_PINW_CAP: 0x00000000
AUD_PINW_UNSOLRESP: 0x00000000
AUD_OUT_DIG_CNVT: 0x00000000
AUD_OUT_CWCAP: 0x00000000
AUD_GRP_CAP: 0x00000000
FENCE 0: 0x00400131 (enabled, X tiled, 4096
pitch, 0x00400000 - 0x00600000 (2048kb))
FENCE 1: 0x00000000 (disabled)
FENCE 2: 0x01400351 (enabled, X tiled, 16384
pitch, 0x01400000 - 0x01c00000 (8192kb))
FENCE 3: 0x03000561 (enabled, X tiled, 32768
pitch, 0x03000000 - 0x05000000 (32768kb))
FENCE 4: 0x02000561 (enabled, X tiled, 32768
pitch, 0x02000000 - 0x04000000 (32768kb))
FENCE 5: 0x00000000 (disabled)
FENCE 6: 0x00000000 (disabled)
FENCE 7: 0x00000000 (disabled)
FENCE 8: 0x00000000 (disabled)
FENCE 9: 0x00000000 (disabled)
FENCE 10: 0x00000000 (disabled)
FENCE 11: 0x00000000 (disabled)
FENCE 12: 0x00000048 (disabled)
FENCE 13: 0x00000002 (disabled)
FENCE 14: 0x00000000 (disabled)
FENCE 15: 0x00000000 (disabled)
FENCE START 0: 0x00000000 (disabled)
FENCE END 0: 0x00000000 (disabled)
FENCE START 1: 0x00000000 (disabled)
FENCE END 1: 0x00000000 (disabled)
FENCE START 2: 0x00000048 (disabled)
FENCE END 2: 0x00000002 (disabled)
FENCE START 3: 0x00000000 (disabled)
FENCE END 3: 0x00000000 (disabled)
FENCE START 4: 0x00000000 (disabled)
FENCE END 4: 0x00000000 (disabled)
FENCE START 5: 0x00000000 (disabled)
FENCE END 5: 0x00000000 (disabled)
FENCE START 6: 0x00000000 (disabled)
FENCE END 6: 0x00000000 (disabled)
FENCE START 7: 0x00000000 (disabled)
FENCE END 7: 0x00000000 (disabled)
FENCE START 8: 0x00000000 (disabled)
FENCE END 8: 0x00000000 (disabled)
FENCE START 9: 0x00000000 (disabled)
FENCE END 9: 0x00000000 (disabled)
FENCE START 10: 0x00000000 (disabled)
FENCE END 10: 0x00000000 (disabled)
FENCE START 11: 0x00000000 (disabled)
FENCE END 11: 0x00000000 (disabled)
FENCE START 12: 0x00000000 (disabled)
FENCE END 12: 0x00000000 (disabled)
FENCE START 13: 0x00000000 (disabled)
FENCE END 13: 0x00000000 (disabled)
FENCE START 14: 0x00000000 (disabled)
FENCE END 14: 0x00000000 (disabled)
FENCE START 15: 0x00000000 (disabled)
FENCE END 15: 0x00000000 (disabled)
INST_PM: 0x00000000
pipe A dot 65000 n 4 m1 21 m2 13 p1 4 p2 4
pipe B dot 327000 n 2 m1 18 m2 7 p1 2 p2 2
Note that this is already with the pipe A quirk removed. Apparently,
something is wrong in the driver when trying to re-establishing the
display. Everything else works on resume, i.e. sound, wifi, mouse,...
are all in good shape.
Note that post-ing the display through the bios (i.e. vbetool post) is
*not* a good idea as it leaves the GPU in a useless state. Also, setting
the vbemode through the bios (i.e. vbetool vbemode set 16664) does not
work as desired. That is, the usual candidates for establishing the
display have been tried and are non-working.
Hope this helps for narrowing the problem.
Thanks,
Thomas
More information about the Intel-gfx
mailing list