[Intel-gfx] [PATCH 16/71] drm/i915/chv: Add DPIO offset for Cherryview. v3

[ville.syrjala at linux.intel.com]

From: Chon Ming Lee <chon.ming.lee at intel.com>

CHV has 2 display phys.  First phy (IOSF offset 0x1A) has two channels,
and second phy (IOSF offset 0x12) has single channel.  The first phy is
used for port B and port C, while second phy is only for port D.

v2: Move the pipe to determine which phy to select for
vlv_dpio_read/vlv_dpio_write to another patch. (Daniel)
v3: Rebase the code based on rework on how to calculate DPIO offset.

Signed-off-by: Chon Ming Lee <chon.ming.lee at intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h      |  2 +-
 drivers/gpu/drm/i915/i915_reg.h      |  1 +
 drivers/gpu/drm/i915/intel_display.c | 12 +++++++++++-
 3 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 4abaa9e..07a162c 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -92,7 +92,7 @@ enum port {
 };
 #define port_name(p) ((p) + 'A')
 
-#define I915_NUM_PHYS_VLV 1
+#define I915_NUM_PHYS_VLV 2
 
 enum dpio_channel {
 	DPIO_CH0,
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index c7ec7d6..beb04ab 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -457,6 +457,7 @@
 #define   IOSF_PORT_PUNIT			0x4
 #define   IOSF_PORT_NC				0x11
 #define   IOSF_PORT_DPIO			0x12
+#define   IOSF_PORT_DPIO_2			0x1a
 #define   IOSF_PORT_GPIO_NC			0x13
 #define   IOSF_PORT_CCK				0x14
 #define   IOSF_PORT_CCU				0xA9
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 9a50b64..df6732e 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1367,7 +1367,17 @@ static void intel_init_dpio(struct drm_device *dev)
 	if (!IS_VALLEYVIEW(dev))
 		return;
 
-	DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
+	/*
+	 * IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
+	 * CHV x1 PHY (DP/HDMI D)
+	 * IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
+	 */
+	if (IS_CHERRYVIEW(dev)) {
+		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
+		DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
+	} else {
+		DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
+	}
 }
 
 static void intel_reset_dpio(struct drm_device *dev)
-- 
1.8.3.2