[Intel-gfx] [PATCH 3/4] drm/i915: extract intel_fdi.c from intel_display.c
Paulo Zanoni
przanoni at gmail.com
Wed Apr 9 23:44:32 CEST 2014
From: Paulo Zanoni <paulo.r.zanoni at intel.com>
Since intel_display.c is way too big for our little heads.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
drivers/gpu/drm/i915/Makefile | 1 +
drivers/gpu/drm/i915/intel_ddi.c | 142 +-----
drivers/gpu/drm/i915/intel_display.c | 794 +----------------------------
drivers/gpu/drm/i915/intel_drv.h | 39 +-
drivers/gpu/drm/i915/intel_fdi.c | 959 +++++++++++++++++++++++++++++++++++
5 files changed, 1003 insertions(+), 932 deletions(-)
create mode 100644 drivers/gpu/drm/i915/intel_fdi.c
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index dfc7993..8e022cc 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -37,6 +37,7 @@ i915-y += intel_bios.o \
intel_cursor.o \
intel_display.o \
intel_eld.o \
+ intel_fdi.o \
intel_modes.o \
intel_overlay.o \
intel_sideband.o \
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 0ad4e96..570e888 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -211,20 +211,7 @@ void intel_prepare_ddi(struct drm_device *dev)
intel_prepare_ddi_buffers(dev, port);
}
-static const long hsw_ddi_buf_ctl_values[] = {
- DDI_BUF_EMP_400MV_0DB_HSW,
- DDI_BUF_EMP_400MV_3_5DB_HSW,
- DDI_BUF_EMP_400MV_6DB_HSW,
- DDI_BUF_EMP_400MV_9_5DB_HSW,
- DDI_BUF_EMP_600MV_0DB_HSW,
- DDI_BUF_EMP_600MV_3_5DB_HSW,
- DDI_BUF_EMP_600MV_6DB_HSW,
- DDI_BUF_EMP_800MV_0DB_HSW,
- DDI_BUF_EMP_800MV_3_5DB_HSW
-};
-
-static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
- enum port port)
+void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv, enum port port)
{
uint32_t reg = DDI_BUF_CTL(port);
int i;
@@ -237,133 +224,6 @@ static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port));
}
-/* Starting with Haswell, different DDI ports can work in FDI mode for
- * connection to the PCH-located connectors. For this, it is necessary to train
- * both the DDI port and PCH receiver for the desired DDI buffer settings.
- *
- * The recommended port to work in FDI mode is DDI E, which we use here. Also,
- * please note that when FDI mode is active on DDI E, it shares 2 lines with
- * DDI A (which is used for eDP)
- */
-
-void hsw_fdi_link_train(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- u32 temp, i, rx_ctl_val;
-
- /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
- * mode set "sequence for CRT port" document:
- * - TP1 to TP2 time with the default value
- * - FDI delay to 90h
- *
- * WaFDIAutoLinkSetTimingOverrride:hsw
- */
- I915_WRITE(_FDI_RXA_MISC, FDI_RX_PWRDN_LANE1_VAL(2) |
- FDI_RX_PWRDN_LANE0_VAL(2) |
- FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
-
- /* Enable the PCH Receiver FDI PLL */
- rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
- FDI_RX_PLL_ENABLE |
- FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
- I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
- POSTING_READ(_FDI_RXA_CTL);
- udelay(220);
-
- /* Switch from Rawclk to PCDclk */
- rx_ctl_val |= FDI_PCDCLK;
- I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
-
- /* Configure Port Clock Select */
- I915_WRITE(PORT_CLK_SEL(PORT_E), intel_crtc->ddi_pll_sel);
-
- /* Start the training iterating through available voltages and emphasis,
- * testing each value twice. */
- for (i = 0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values) * 2; i++) {
- /* Configure DP_TP_CTL with auto-training */
- I915_WRITE(DP_TP_CTL(PORT_E),
- DP_TP_CTL_FDI_AUTOTRAIN |
- DP_TP_CTL_ENHANCED_FRAME_ENABLE |
- DP_TP_CTL_LINK_TRAIN_PAT1 |
- DP_TP_CTL_ENABLE);
-
- /* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
- * DDI E does not support port reversal, the functionality is
- * achieved on the PCH side in FDI_RX_CTL, so no need to set the
- * port reversal bit */
- I915_WRITE(DDI_BUF_CTL(PORT_E),
- DDI_BUF_CTL_ENABLE |
- ((intel_crtc->config.fdi_lanes - 1) << 1) |
- hsw_ddi_buf_ctl_values[i / 2]);
- POSTING_READ(DDI_BUF_CTL(PORT_E));
-
- udelay(600);
-
- /* Program PCH FDI Receiver TU */
- I915_WRITE(_FDI_RXA_TUSIZE1, TU_SIZE(64));
-
- /* Enable PCH FDI Receiver with auto-training */
- rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
- I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
- POSTING_READ(_FDI_RXA_CTL);
-
- /* Wait for FDI receiver lane calibration */
- udelay(30);
-
- /* Unset FDI_RX_MISC pwrdn lanes */
- temp = I915_READ(_FDI_RXA_MISC);
- temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
- I915_WRITE(_FDI_RXA_MISC, temp);
- POSTING_READ(_FDI_RXA_MISC);
-
- /* Wait for FDI auto training time */
- udelay(5);
-
- temp = I915_READ(DP_TP_STATUS(PORT_E));
- if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
- DRM_DEBUG_KMS("FDI link training done on step %d\n", i);
-
- /* Enable normal pixel sending for FDI */
- I915_WRITE(DP_TP_CTL(PORT_E),
- DP_TP_CTL_FDI_AUTOTRAIN |
- DP_TP_CTL_LINK_TRAIN_NORMAL |
- DP_TP_CTL_ENHANCED_FRAME_ENABLE |
- DP_TP_CTL_ENABLE);
-
- return;
- }
-
- temp = I915_READ(DDI_BUF_CTL(PORT_E));
- temp &= ~DDI_BUF_CTL_ENABLE;
- I915_WRITE(DDI_BUF_CTL(PORT_E), temp);
- POSTING_READ(DDI_BUF_CTL(PORT_E));
-
- /* Disable DP_TP_CTL and FDI_RX_CTL and retry */
- temp = I915_READ(DP_TP_CTL(PORT_E));
- temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
- temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
- I915_WRITE(DP_TP_CTL(PORT_E), temp);
- POSTING_READ(DP_TP_CTL(PORT_E));
-
- intel_wait_ddi_buf_idle(dev_priv, PORT_E);
-
- rx_ctl_val &= ~FDI_RX_ENABLE;
- I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
- POSTING_READ(_FDI_RXA_CTL);
-
- /* Reset FDI_RX_MISC pwrdn lanes */
- temp = I915_READ(_FDI_RXA_MISC);
- temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
- temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
- I915_WRITE(_FDI_RXA_MISC, temp);
- POSTING_READ(_FDI_RXA_MISC);
- }
-
- DRM_ERROR("FDI link training failed!\n");
-}
-
static void intel_ddi_mode_set(struct intel_encoder *encoder)
{
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index d327735..e23ca4b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -80,16 +80,6 @@ intel_pch_rawclk(struct drm_device *dev)
return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK;
}
-static inline u32 /* units of 100MHz */
-intel_fdi_link_freq(struct drm_device *dev)
-{
- if (IS_GEN5(dev)) {
- struct drm_i915_private *dev_priv = dev->dev_private;
- return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
- } else
- return 27;
-}
-
static const intel_limit_t intel_limits_i8xx_dac = {
.dot = { .min = 25000, .max = 350000 },
.vco = { .min = 908000, .max = 1512000 },
@@ -977,83 +967,6 @@ void assert_shared_dpll(struct drm_i915_private *dev_priv,
pll->name, state_string(state), state_string(cur_state));
}
-static void assert_fdi_tx(struct drm_i915_private *dev_priv,
- enum pipe pipe, bool state)
-{
- int reg;
- u32 val;
- bool cur_state;
- enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
- pipe);
-
- if (HAS_DDI(dev_priv->dev)) {
- /* DDI does not have a specific FDI_TX register */
- reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
- val = I915_READ(reg);
- cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
- } else {
- reg = FDI_TX_CTL(pipe);
- val = I915_READ(reg);
- cur_state = !!(val & FDI_TX_ENABLE);
- }
- WARN(cur_state != state,
- "FDI TX state assertion failure (expected %s, current %s)\n",
- state_string(state), state_string(cur_state));
-}
-#define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
-#define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
-
-static void assert_fdi_rx(struct drm_i915_private *dev_priv,
- enum pipe pipe, bool state)
-{
- int reg;
- u32 val;
- bool cur_state;
-
- reg = FDI_RX_CTL(pipe);
- val = I915_READ(reg);
- cur_state = !!(val & FDI_RX_ENABLE);
- WARN(cur_state != state,
- "FDI RX state assertion failure (expected %s, current %s)\n",
- state_string(state), state_string(cur_state));
-}
-#define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
-#define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
-
-static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
- enum pipe pipe)
-{
- int reg;
- u32 val;
-
- /* ILK FDI PLL is always enabled */
- if (INTEL_INFO(dev_priv->dev)->gen == 5)
- return;
-
- /* On Haswell, DDI ports are responsible for the FDI PLL setup */
- if (HAS_DDI(dev_priv->dev))
- return;
-
- reg = FDI_TX_CTL(pipe);
- val = I915_READ(reg);
- WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
-}
-
-void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
- enum pipe pipe, bool state)
-{
- int reg;
- u32 val;
- bool cur_state;
-
- reg = FDI_RX_CTL(pipe);
- val = I915_READ(reg);
- cur_state = !!(val & FDI_RX_PLL_ENABLE);
- WARN(cur_state != state,
- "FDI RX PLL assertion failure (expected %s, current %s)\n",
- state_string(state), state_string(cur_state));
-}
-
static void assert_panel_unlocked(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
@@ -1110,8 +1023,8 @@ void assert_pipe(struct drm_i915_private *dev_priv,
pipe_name(pipe), state_string(state), state_string(cur_state));
}
-static void assert_plane(struct drm_i915_private *dev_priv,
- enum plane plane, bool state)
+void assert_plane(struct drm_i915_private *dev_priv, enum plane plane,
+ bool state)
{
int reg;
u32 val;
@@ -2503,549 +2416,11 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
return 0;
}
-static void intel_fdi_normal_train(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
- u32 reg, temp;
-
- /* enable normal train */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- if (IS_IVYBRIDGE(dev)) {
- temp &= ~FDI_LINK_TRAIN_NONE_IVB;
- temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
- } else {
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
- }
- I915_WRITE(reg, temp);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- if (HAS_PCH_CPT(dev)) {
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_NORMAL_CPT;
- } else {
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_NONE;
- }
- I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
-
- /* wait one idle pattern time */
- POSTING_READ(reg);
- udelay(1000);
-
- /* IVB wants error correction enabled */
- if (IS_IVYBRIDGE(dev))
- I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
- FDI_FE_ERRC_ENABLE);
-}
-
-static bool pipe_has_enabled_pch(struct intel_crtc *crtc)
-{
- return crtc->base.enabled && crtc->active &&
- crtc->config.has_pch_encoder;
-}
-
static void ivb_modeset_global_resources(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *pipe_B_crtc =
- to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
- struct intel_crtc *pipe_C_crtc =
- to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]);
- uint32_t temp;
-
- /*
- * When everything is off disable fdi C so that we could enable fdi B
- * with all lanes. Note that we don't care about enabled pipes without
- * an enabled pch encoder.
- */
- if (!pipe_has_enabled_pch(pipe_B_crtc) &&
- !pipe_has_enabled_pch(pipe_C_crtc)) {
- WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
- WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
-
- temp = I915_READ(SOUTH_CHICKEN1);
- temp &= ~FDI_BC_BIFURCATION_SELECT;
- DRM_DEBUG_KMS("disabling fdi C rx\n");
- I915_WRITE(SOUTH_CHICKEN1, temp);
- }
-}
-
-/* The FDI link training functions for ILK/Ibexpeak. */
-static void ironlake_fdi_link_train(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
- u32 reg, temp, tries;
-
- /* FDI needs bits from pipe & plane first */
- assert_pipe_enabled(dev_priv, pipe);
- assert_plane_enabled(dev_priv, plane);
-
- /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
- for train result */
- reg = FDI_RX_IMR(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_RX_SYMBOL_LOCK;
- temp &= ~FDI_RX_BIT_LOCK;
- I915_WRITE(reg, temp);
- I915_READ(reg);
- udelay(150);
-
- /* enable CPU FDI TX and PCH FDI RX */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_DP_PORT_WIDTH_MASK;
- temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- I915_WRITE(reg, temp | FDI_TX_ENABLE);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- I915_WRITE(reg, temp | FDI_RX_ENABLE);
-
- POSTING_READ(reg);
- udelay(150);
-
- /* Ironlake workaround, enable clock pointer after FDI enable*/
- I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
- I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
- FDI_RX_PHASE_SYNC_POINTER_EN);
-
- reg = FDI_RX_IIR(pipe);
- for (tries = 0; tries < 5; tries++) {
- temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
- if ((temp & FDI_RX_BIT_LOCK)) {
- DRM_DEBUG_KMS("FDI train 1 done.\n");
- I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
- break;
- }
- }
- if (tries == 5)
- DRM_ERROR("FDI train 1 fail!\n");
-
- /* Train 2 */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_2;
- I915_WRITE(reg, temp);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_2;
- I915_WRITE(reg, temp);
-
- POSTING_READ(reg);
- udelay(150);
-
- reg = FDI_RX_IIR(pipe);
- for (tries = 0; tries < 5; tries++) {
- temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
- if (temp & FDI_RX_SYMBOL_LOCK) {
- I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG_KMS("FDI train 2 done.\n");
- break;
- }
- }
- if (tries == 5)
- DRM_ERROR("FDI train 2 fail!\n");
-
- DRM_DEBUG_KMS("FDI train done\n");
-
-}
-
-static const int snb_b_fdi_train_param[] = {
- FDI_LINK_TRAIN_400MV_0DB_SNB_B,
- FDI_LINK_TRAIN_400MV_6DB_SNB_B,
- FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
- FDI_LINK_TRAIN_800MV_0DB_SNB_B,
-};
-
-/* The FDI link training functions for SNB/Cougarpoint. */
-static void gen6_fdi_link_train(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
- u32 reg, temp, i, retry;
-
- /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
- for train result */
- reg = FDI_RX_IMR(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_RX_SYMBOL_LOCK;
- temp &= ~FDI_RX_BIT_LOCK;
- I915_WRITE(reg, temp);
-
- POSTING_READ(reg);
- udelay(150);
-
- /* enable CPU FDI TX and PCH FDI RX */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_DP_PORT_WIDTH_MASK;
- temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
- /* SNB-B */
- temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
- I915_WRITE(reg, temp | FDI_TX_ENABLE);
-
- I915_WRITE(FDI_RX_MISC(pipe),
- FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- if (HAS_PCH_CPT(dev)) {
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
- } else {
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- }
- I915_WRITE(reg, temp | FDI_RX_ENABLE);
-
- POSTING_READ(reg);
- udelay(150);
-
- for (i = 0; i < 4; i++) {
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
- temp |= snb_b_fdi_train_param[i];
- I915_WRITE(reg, temp);
-
- POSTING_READ(reg);
- udelay(500);
-
- for (retry = 0; retry < 5; retry++) {
- reg = FDI_RX_IIR(pipe);
- temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
- if (temp & FDI_RX_BIT_LOCK) {
- I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
- DRM_DEBUG_KMS("FDI train 1 done.\n");
- break;
- }
- udelay(50);
- }
- if (retry < 5)
- break;
- }
- if (i == 4)
- DRM_ERROR("FDI train 1 fail!\n");
-
- /* Train 2 */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_2;
- if (IS_GEN6(dev)) {
- temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
- /* SNB-B */
- temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
- }
- I915_WRITE(reg, temp);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- if (HAS_PCH_CPT(dev)) {
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
- } else {
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_2;
- }
- I915_WRITE(reg, temp);
-
- POSTING_READ(reg);
- udelay(150);
-
- for (i = 0; i < 4; i++) {
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
- temp |= snb_b_fdi_train_param[i];
- I915_WRITE(reg, temp);
-
- POSTING_READ(reg);
- udelay(500);
-
- for (retry = 0; retry < 5; retry++) {
- reg = FDI_RX_IIR(pipe);
- temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
- if (temp & FDI_RX_SYMBOL_LOCK) {
- I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG_KMS("FDI train 2 done.\n");
- break;
- }
- udelay(50);
- }
- if (retry < 5)
- break;
- }
- if (i == 4)
- DRM_ERROR("FDI train 2 fail!\n");
-
- DRM_DEBUG_KMS("FDI train done.\n");
-}
-
-/* Manual link training for Ivy Bridge A0 parts */
-static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
- u32 reg, temp, i, j;
-
- /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
- for train result */
- reg = FDI_RX_IMR(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_RX_SYMBOL_LOCK;
- temp &= ~FDI_RX_BIT_LOCK;
- I915_WRITE(reg, temp);
-
- POSTING_READ(reg);
- udelay(150);
-
- DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
- I915_READ(FDI_RX_IIR(pipe)));
-
- /* Try each vswing and preemphasis setting twice before moving on */
- for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
- /* disable first in case we need to retry */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
- temp &= ~FDI_TX_ENABLE;
- I915_WRITE(reg, temp);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_AUTO;
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp &= ~FDI_RX_ENABLE;
- I915_WRITE(reg, temp);
-
- /* enable CPU FDI TX and PCH FDI RX */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_DP_PORT_WIDTH_MASK;
- temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
- temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
- temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
- temp |= snb_b_fdi_train_param[j/2];
- temp |= FDI_COMPOSITE_SYNC;
- I915_WRITE(reg, temp | FDI_TX_ENABLE);
-
- I915_WRITE(FDI_RX_MISC(pipe),
- FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
- temp |= FDI_COMPOSITE_SYNC;
- I915_WRITE(reg, temp | FDI_RX_ENABLE);
-
- POSTING_READ(reg);
- udelay(1); /* should be 0.5us */
-
- for (i = 0; i < 4; i++) {
- reg = FDI_RX_IIR(pipe);
- temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
- if (temp & FDI_RX_BIT_LOCK ||
- (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
- I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
- DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
- i);
- break;
- }
- udelay(1); /* should be 0.5us */
- }
- if (i == 4) {
- DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
- continue;
- }
-
- /* Train 2 */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_NONE_IVB;
- temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
- I915_WRITE(reg, temp);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
- I915_WRITE(reg, temp);
-
- POSTING_READ(reg);
- udelay(2); /* should be 1.5us */
-
- for (i = 0; i < 4; i++) {
- reg = FDI_RX_IIR(pipe);
- temp = I915_READ(reg);
- DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
-
- if (temp & FDI_RX_SYMBOL_LOCK ||
- (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
- I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
- DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
- i);
- goto train_done;
- }
- udelay(2); /* should be 1.5us */
- }
- if (i == 4)
- DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
- }
-
-train_done:
- DRM_DEBUG_KMS("FDI train done.\n");
-}
-
-static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
-{
- struct drm_device *dev = intel_crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int pipe = intel_crtc->pipe;
- u32 reg, temp;
-
-
- /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
- temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
- temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
- I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
-
- POSTING_READ(reg);
- udelay(200);
-
- /* Switch from Rawclk to PCDclk */
- temp = I915_READ(reg);
- I915_WRITE(reg, temp | FDI_PCDCLK);
-
- POSTING_READ(reg);
- udelay(200);
-
- /* Enable CPU FDI TX PLL, always on for Ironlake */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- if ((temp & FDI_TX_PLL_ENABLE) == 0) {
- I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
-
- POSTING_READ(reg);
- udelay(100);
- }
-}
-
-static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
-{
- struct drm_device *dev = intel_crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- int pipe = intel_crtc->pipe;
- u32 reg, temp;
-
- /* Switch from PCDclk to Rawclk */
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- I915_WRITE(reg, temp & ~FDI_PCDCLK);
-
- /* Disable CPU FDI TX PLL */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
-
- POSTING_READ(reg);
- udelay(100);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
- /* Wait for the clocks to turn off. */
- POSTING_READ(reg);
- udelay(100);
-}
-
-static void ironlake_fdi_disable(struct drm_crtc *crtc)
-{
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
- u32 reg, temp;
-
- /* disable CPU FDI tx and PCH FDI rx */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
- POSTING_READ(reg);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~(0x7 << 16);
- temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
- I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
-
- POSTING_READ(reg);
- udelay(100);
-
- /* Ironlake workaround, disable clock pointer after downing FDI */
- if (HAS_PCH_IBX(dev)) {
- I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
- }
-
- /* still set train pattern 1 */
- reg = FDI_TX_CTL(pipe);
- temp = I915_READ(reg);
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- I915_WRITE(reg, temp);
-
- reg = FDI_RX_CTL(pipe);
- temp = I915_READ(reg);
- if (HAS_PCH_CPT(dev)) {
- temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
- temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
- } else {
- temp &= ~FDI_LINK_TRAIN_NONE;
- temp |= FDI_LINK_TRAIN_PATTERN_1;
- }
- /* BPC in FDI rx is consistent with that in PIPECONF */
- temp &= ~(0x07 << 16);
- temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
- I915_WRITE(reg, temp);
-
- POSTING_READ(reg);
- udelay(100);
+ ivb_update_fdi_bc_resources(dev_priv);
}
bool intel_has_pending_fb_unpin(struct drm_device *dev)
@@ -3203,48 +2578,6 @@ static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc,
I915_READ(VSYNCSHIFT(cpu_transcoder)));
}
-static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t temp;
-
- temp = I915_READ(SOUTH_CHICKEN1);
- if (temp & FDI_BC_BIFURCATION_SELECT)
- return;
-
- WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
- WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
-
- temp |= FDI_BC_BIFURCATION_SELECT;
- DRM_DEBUG_KMS("enabling fdi C rx\n");
- I915_WRITE(SOUTH_CHICKEN1, temp);
- POSTING_READ(SOUTH_CHICKEN1);
-}
-
-static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
-{
- struct drm_device *dev = intel_crtc->base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- switch (intel_crtc->pipe) {
- case PIPE_A:
- break;
- case PIPE_B:
- if (intel_crtc->config.fdi_lanes > 2)
- WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
- else
- cpt_enable_fdi_bc_bifurcation(dev);
-
- break;
- case PIPE_C:
- cpt_enable_fdi_bc_bifurcation(dev);
-
- break;
- default:
- BUG();
- }
-}
-
/*
* Enable PCH resources required for PCH ports:
* - PCH PLLs
@@ -4650,111 +3983,6 @@ bool intel_connector_get_hw_state(struct intel_connector *connector)
return encoder->get_hw_state(encoder, &pipe);
}
-static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
- struct intel_crtc_config *pipe_config)
-{
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_crtc *pipe_B_crtc =
- to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
-
- DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
- pipe_name(pipe), pipe_config->fdi_lanes);
- if (pipe_config->fdi_lanes > 4) {
- DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
- pipe_name(pipe), pipe_config->fdi_lanes);
- return false;
- }
-
- if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
- if (pipe_config->fdi_lanes > 2) {
- DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
- pipe_config->fdi_lanes);
- return false;
- } else {
- return true;
- }
- }
-
- if (INTEL_INFO(dev)->num_pipes == 2)
- return true;
-
- /* Ivybridge 3 pipe is really complicated */
- switch (pipe) {
- case PIPE_A:
- return true;
- case PIPE_B:
- if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
- pipe_config->fdi_lanes > 2) {
- DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
- pipe_name(pipe), pipe_config->fdi_lanes);
- return false;
- }
- return true;
- case PIPE_C:
- if (!pipe_has_enabled_pch(pipe_B_crtc) ||
- pipe_B_crtc->config.fdi_lanes <= 2) {
- if (pipe_config->fdi_lanes > 2) {
- DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
- pipe_name(pipe), pipe_config->fdi_lanes);
- return false;
- }
- } else {
- DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
- return false;
- }
- return true;
- default:
- BUG();
- }
-}
-
-#define RETRY 1
-static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
- struct intel_crtc_config *pipe_config)
-{
- struct drm_device *dev = intel_crtc->base.dev;
- struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
- int lane, link_bw, fdi_dotclock;
- bool setup_ok, needs_recompute = false;
-
-retry:
- /* FDI is a binary signal running at ~2.7GHz, encoding
- * each output octet as 10 bits. The actual frequency
- * is stored as a divider into a 100MHz clock, and the
- * mode pixel clock is stored in units of 1KHz.
- * Hence the bw of each lane in terms of the mode signal
- * is:
- */
- link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
-
- fdi_dotclock = adjusted_mode->crtc_clock;
-
- lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
- pipe_config->pipe_bpp);
-
- pipe_config->fdi_lanes = lane;
-
- intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
- link_bw, &pipe_config->fdi_m_n);
-
- setup_ok = ironlake_check_fdi_lanes(intel_crtc->base.dev,
- intel_crtc->pipe, pipe_config);
- if (!setup_ok && pipe_config->pipe_bpp > 6*3) {
- pipe_config->pipe_bpp -= 2*3;
- DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
- pipe_config->pipe_bpp);
- needs_recompute = true;
- pipe_config->bw_constrained = true;
-
- goto retry;
- }
-
- if (needs_recompute)
- return RETRY;
-
- return setup_ok ? 0 : -EINVAL;
-}
-
static void hsw_compute_ips_config(struct intel_crtc *crtc,
struct intel_crtc_config *pipe_config)
{
@@ -8710,7 +7938,7 @@ encoder_retry:
goto fail;
}
- if (ret == RETRY) {
+ if (ret == FDI_COMPUTE_CONFIG_RETRY) {
if (WARN(!retry, "loop in pipe configuration computation\n")) {
ret = -EINVAL;
goto fail;
@@ -10410,27 +9638,21 @@ static void intel_init_display(struct drm_device *dev)
i830_get_display_clock_speed;
if (HAS_PCH_SPLIT(dev)) {
- if (IS_GEN5(dev)) {
- dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
- } else if (IS_GEN6(dev)) {
- dev_priv->display.fdi_link_train = gen6_fdi_link_train;
+ if (IS_GEN6(dev))
dev_priv->display.modeset_global_resources =
snb_modeset_global_resources;
- } else if (IS_IVYBRIDGE(dev)) {
- /* FIXME: detect B0+ stepping and use auto training */
- dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
+ else if (IS_IVYBRIDGE(dev))
dev_priv->display.modeset_global_resources =
ivb_modeset_global_resources;
- } else if (IS_HASWELL(dev) || IS_GEN8(dev)) {
- dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+ else if (IS_HASWELL(dev) || IS_GEN8(dev))
dev_priv->display.modeset_global_resources =
haswell_modeset_global_resources;
- }
} else if (IS_VALLEYVIEW(dev)) {
dev_priv->display.modeset_global_resources =
valleyview_modeset_global_resources;
}
+ intel_fdi_init(dev_priv);
intel_eld_init(dev_priv);
/* Default just returns -ENODEV to indicate unsupported */
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 914dcbc..013ddf5 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -657,7 +657,6 @@ int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y);
/* intel_ddi.c */
void intel_prepare_ddi(struct drm_device *dev);
-void hsw_fdi_link_train(struct drm_crtc *crtc);
void intel_ddi_init(struct drm_device *dev, enum port port);
enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder);
bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe);
@@ -678,6 +677,7 @@ bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector);
void intel_ddi_fdi_disable(struct drm_crtc *crtc);
void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config);
+void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv, enum port port);
/* intel_display.c */
@@ -738,13 +738,13 @@ void assert_pll(struct drm_i915_private *dev_priv,
enum pipe pipe, bool state);
#define assert_pll_enabled(d, p) assert_pll(d, p, true)
#define assert_pll_disabled(d, p) assert_pll(d, p, false)
-void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
- enum pipe pipe, bool state);
-#define assert_fdi_rx_pll_enabled(d, p) assert_fdi_rx_pll(d, p, true)
-#define assert_fdi_rx_pll_disabled(d, p) assert_fdi_rx_pll(d, p, false)
void assert_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, bool state);
#define assert_pipe_enabled(d, p) assert_pipe(d, p, true)
#define assert_pipe_disabled(d, p) assert_pipe(d, p, false)
+void assert_plane(struct drm_i915_private *dev_priv, enum plane plane,
+ bool state);
+#define assert_plane_enabled(d, p) assert_plane(d, p, true)
+#define assert_plane_disabled(d, p) assert_plane(d, p, false)
unsigned long intel_gen4_compute_page_offset(int *x, int *y,
unsigned int tiling_mode,
unsigned int bpp,
@@ -840,6 +840,35 @@ static inline void intel_fbdev_restore_mode(struct drm_device *dev)
}
#endif
+
+/* intel_fdi.c */
+u32 intel_fdi_link_freq(struct drm_device *dev);
+void assert_fdi_tx(struct drm_i915_private *dev_priv, enum pipe pipe,
+ bool state);
+#define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
+#define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
+void assert_fdi_rx(struct drm_i915_private *dev_priv, enum pipe pipe,
+ bool state);
+#define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
+#define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
+void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
+ enum pipe pipe, bool state);
+#define assert_fdi_rx_pll_enabled(d, p) assert_fdi_rx_pll(d, p, true)
+#define assert_fdi_rx_pll_disabled(d, p) assert_fdi_rx_pll(d, p, false)
+void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc);
+void intel_fdi_normal_train(struct drm_crtc *crtc);
+void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe);
+void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc);
+void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc);
+void ironlake_fdi_disable(struct drm_crtc *crtc);
+void intel_fdi_init(struct drm_i915_private *dev_priv);
+#define FDI_COMPUTE_CONFIG_RETRY 1
+int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
+ struct intel_crtc_config *pipe_config);
+void ivb_update_fdi_bc_resources(struct drm_i915_private *dev_priv);
+
+
/* intel_hdmi.c */
void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port);
void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port,
diff --git a/drivers/gpu/drm/i915/intel_fdi.c b/drivers/gpu/drm/i915/intel_fdi.c
new file mode 100644
index 0000000..9023369
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_fdi.c
@@ -0,0 +1,959 @@
+/*
+ * Copyright © 2006-2007, 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ * Eric Anholt <eric at anholt.net>
+ */
+
+#include "intel_drv.h"
+
+u32 /* units of 100MHz */
+intel_fdi_link_freq(struct drm_device *dev)
+{
+ if (IS_GEN5(dev)) {
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
+ } else
+ return 27;
+}
+
+void assert_fdi_tx(struct drm_i915_private *dev_priv, enum pipe pipe,
+ bool state)
+{
+ int reg;
+ u32 val;
+ bool cur_state;
+ enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
+ pipe);
+
+ if (HAS_DDI(dev_priv->dev)) {
+ /* DDI does not have a specific FDI_TX register */
+ reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
+ val = I915_READ(reg);
+ cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
+ } else {
+ reg = FDI_TX_CTL(pipe);
+ val = I915_READ(reg);
+ cur_state = !!(val & FDI_TX_ENABLE);
+ }
+ WARN(cur_state != state,
+ "FDI TX state assertion failure (expected %s, current %s)\n",
+ state_string(state), state_string(cur_state));
+}
+
+void assert_fdi_rx(struct drm_i915_private *dev_priv, enum pipe pipe,
+ bool state)
+{
+ int reg;
+ u32 val;
+ bool cur_state;
+
+ reg = FDI_RX_CTL(pipe);
+ val = I915_READ(reg);
+ cur_state = !!(val & FDI_RX_ENABLE);
+ WARN(cur_state != state,
+ "FDI RX state assertion failure (expected %s, current %s)\n",
+ state_string(state), state_string(cur_state));
+}
+
+void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
+ enum pipe pipe)
+{
+ int reg;
+ u32 val;
+
+ /* ILK FDI PLL is always enabled */
+ if (INTEL_INFO(dev_priv->dev)->gen == 5)
+ return;
+
+ /* On Haswell, DDI ports are responsible for the FDI PLL setup */
+ if (HAS_DDI(dev_priv->dev))
+ return;
+
+ reg = FDI_TX_CTL(pipe);
+ val = I915_READ(reg);
+ WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
+}
+
+void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
+ enum pipe pipe, bool state)
+{
+ int reg;
+ u32 val;
+ bool cur_state;
+
+ reg = FDI_RX_CTL(pipe);
+ val = I915_READ(reg);
+ cur_state = !!(val & FDI_RX_PLL_ENABLE);
+ WARN(cur_state != state,
+ "FDI RX PLL assertion failure (expected %s, current %s)\n",
+ state_string(state), state_string(cur_state));
+}
+
+
+/* The FDI link training functions for ILK/Ibexpeak. */
+static void ironlake_fdi_link_train(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
+ u32 reg, temp, tries;
+
+ /* FDI needs bits from pipe & plane first */
+ assert_pipe_enabled(dev_priv, pipe);
+ assert_plane_enabled(dev_priv, plane);
+
+ /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+ for train result */
+ reg = FDI_RX_IMR(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_RX_SYMBOL_LOCK;
+ temp &= ~FDI_RX_BIT_LOCK;
+ I915_WRITE(reg, temp);
+ I915_READ(reg);
+ udelay(150);
+
+ /* enable CPU FDI TX and PCH FDI RX */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_DP_PORT_WIDTH_MASK;
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(reg, temp | FDI_TX_ENABLE);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(reg, temp | FDI_RX_ENABLE);
+
+ POSTING_READ(reg);
+ udelay(150);
+
+ /* Ironlake workaround, enable clock pointer after FDI enable*/
+ I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
+ I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
+ FDI_RX_PHASE_SYNC_POINTER_EN);
+
+ reg = FDI_RX_IIR(pipe);
+ for (tries = 0; tries < 5; tries++) {
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+ if ((temp & FDI_RX_BIT_LOCK)) {
+ DRM_DEBUG_KMS("FDI train 1 done.\n");
+ I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+ break;
+ }
+ }
+ if (tries == 5)
+ DRM_ERROR("FDI train 1 fail!\n");
+
+ /* Train 2 */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_2;
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_2;
+ I915_WRITE(reg, temp);
+
+ POSTING_READ(reg);
+ udelay(150);
+
+ reg = FDI_RX_IIR(pipe);
+ for (tries = 0; tries < 5; tries++) {
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+ if (temp & FDI_RX_SYMBOL_LOCK) {
+ I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+ DRM_DEBUG_KMS("FDI train 2 done.\n");
+ break;
+ }
+ }
+ if (tries == 5)
+ DRM_ERROR("FDI train 2 fail!\n");
+
+ DRM_DEBUG_KMS("FDI train done\n");
+
+}
+
+static const int snb_b_fdi_train_param[] = {
+ FDI_LINK_TRAIN_400MV_0DB_SNB_B,
+ FDI_LINK_TRAIN_400MV_6DB_SNB_B,
+ FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
+ FDI_LINK_TRAIN_800MV_0DB_SNB_B,
+};
+
+/* The FDI link training functions for SNB/Cougarpoint. */
+static void gen6_fdi_link_train(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 reg, temp, i, retry;
+
+ /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+ for train result */
+ reg = FDI_RX_IMR(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_RX_SYMBOL_LOCK;
+ temp &= ~FDI_RX_BIT_LOCK;
+ I915_WRITE(reg, temp);
+
+ POSTING_READ(reg);
+ udelay(150);
+
+ /* enable CPU FDI TX and PCH FDI RX */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_DP_PORT_WIDTH_MASK;
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+ /* SNB-B */
+ temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+ I915_WRITE(reg, temp | FDI_TX_ENABLE);
+
+ I915_WRITE(FDI_RX_MISC(pipe),
+ FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ } else {
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ }
+ I915_WRITE(reg, temp | FDI_RX_ENABLE);
+
+ POSTING_READ(reg);
+ udelay(150);
+
+ for (i = 0; i < 4; i++) {
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+ temp |= snb_b_fdi_train_param[i];
+ I915_WRITE(reg, temp);
+
+ POSTING_READ(reg);
+ udelay(500);
+
+ for (retry = 0; retry < 5; retry++) {
+ reg = FDI_RX_IIR(pipe);
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_BIT_LOCK) {
+ I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+ DRM_DEBUG_KMS("FDI train 1 done.\n");
+ break;
+ }
+ udelay(50);
+ }
+ if (retry < 5)
+ break;
+ }
+ if (i == 4)
+ DRM_ERROR("FDI train 1 fail!\n");
+
+ /* Train 2 */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_2;
+ if (IS_GEN6(dev)) {
+ temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+ /* SNB-B */
+ temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+ }
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
+ } else {
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_2;
+ }
+ I915_WRITE(reg, temp);
+
+ POSTING_READ(reg);
+ udelay(150);
+
+ for (i = 0; i < 4; i++) {
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+ temp |= snb_b_fdi_train_param[i];
+ I915_WRITE(reg, temp);
+
+ POSTING_READ(reg);
+ udelay(500);
+
+ for (retry = 0; retry < 5; retry++) {
+ reg = FDI_RX_IIR(pipe);
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+ if (temp & FDI_RX_SYMBOL_LOCK) {
+ I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+ DRM_DEBUG_KMS("FDI train 2 done.\n");
+ break;
+ }
+ udelay(50);
+ }
+ if (retry < 5)
+ break;
+ }
+ if (i == 4)
+ DRM_ERROR("FDI train 2 fail!\n");
+
+ DRM_DEBUG_KMS("FDI train done.\n");
+}
+
+/* Manual link training for Ivy Bridge A0 parts */
+static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 reg, temp, i, j;
+
+ /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
+ for train result */
+ reg = FDI_RX_IMR(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_RX_SYMBOL_LOCK;
+ temp &= ~FDI_RX_BIT_LOCK;
+ I915_WRITE(reg, temp);
+
+ POSTING_READ(reg);
+ udelay(150);
+
+ DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
+ I915_READ(FDI_RX_IIR(pipe)));
+
+ /* Try each vswing and preemphasis setting twice before moving on */
+ for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
+ /* disable first in case we need to retry */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
+ temp &= ~FDI_TX_ENABLE;
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_AUTO;
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp &= ~FDI_RX_ENABLE;
+ I915_WRITE(reg, temp);
+
+ /* enable CPU FDI TX and PCH FDI RX */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_DP_PORT_WIDTH_MASK;
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
+ temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
+ temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
+ temp |= snb_b_fdi_train_param[j/2];
+ temp |= FDI_COMPOSITE_SYNC;
+ I915_WRITE(reg, temp | FDI_TX_ENABLE);
+
+ I915_WRITE(FDI_RX_MISC(pipe),
+ FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ temp |= FDI_COMPOSITE_SYNC;
+ I915_WRITE(reg, temp | FDI_RX_ENABLE);
+
+ POSTING_READ(reg);
+ udelay(1); /* should be 0.5us */
+
+ for (i = 0; i < 4; i++) {
+ reg = FDI_RX_IIR(pipe);
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+ if (temp & FDI_RX_BIT_LOCK ||
+ (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
+ I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
+ DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
+ i);
+ break;
+ }
+ udelay(1); /* should be 0.5us */
+ }
+ if (i == 4) {
+ DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
+ continue;
+ }
+
+ /* Train 2 */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_NONE_IVB;
+ temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
+ I915_WRITE(reg, temp);
+
+ POSTING_READ(reg);
+ udelay(2); /* should be 1.5us */
+
+ for (i = 0; i < 4; i++) {
+ reg = FDI_RX_IIR(pipe);
+ temp = I915_READ(reg);
+ DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
+
+ if (temp & FDI_RX_SYMBOL_LOCK ||
+ (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
+ I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
+ DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
+ i);
+ goto train_done;
+ }
+ udelay(2); /* should be 1.5us */
+ }
+ if (i == 4)
+ DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
+ }
+
+train_done:
+ DRM_DEBUG_KMS("FDI train done.\n");
+}
+
+void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc)
+{
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = intel_crtc->pipe;
+ u32 reg, temp;
+
+
+ /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
+ temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
+ I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
+
+ POSTING_READ(reg);
+ udelay(200);
+
+ /* Switch from Rawclk to PCDclk */
+ temp = I915_READ(reg);
+ I915_WRITE(reg, temp | FDI_PCDCLK);
+
+ POSTING_READ(reg);
+ udelay(200);
+
+ /* Enable CPU FDI TX PLL, always on for Ironlake */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ if ((temp & FDI_TX_PLL_ENABLE) == 0) {
+ I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
+
+ POSTING_READ(reg);
+ udelay(100);
+ }
+}
+
+void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
+{
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int pipe = intel_crtc->pipe;
+ u32 reg, temp;
+
+ /* Switch from PCDclk to Rawclk */
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ I915_WRITE(reg, temp & ~FDI_PCDCLK);
+
+ /* Disable CPU FDI TX PLL */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
+
+ POSTING_READ(reg);
+ udelay(100);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
+
+ /* Wait for the clocks to turn off. */
+ POSTING_READ(reg);
+ udelay(100);
+}
+
+void ironlake_fdi_disable(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 reg, temp;
+
+ /* disable CPU FDI tx and PCH FDI rx */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
+ POSTING_READ(reg);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~(0x7 << 16);
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
+ I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
+
+ POSTING_READ(reg);
+ udelay(100);
+
+ /* Ironlake workaround, disable clock pointer after downing FDI */
+ if (HAS_PCH_IBX(dev)) {
+ I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
+ }
+
+ /* still set train pattern 1 */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+ } else {
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_PATTERN_1;
+ }
+ /* BPC in FDI rx is consistent with that in PIPECONF */
+ temp &= ~(0x07 << 16);
+ temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
+ I915_WRITE(reg, temp);
+
+ POSTING_READ(reg);
+ udelay(100);
+}
+
+static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t temp;
+
+ temp = I915_READ(SOUTH_CHICKEN1);
+ if (temp & FDI_BC_BIFURCATION_SELECT)
+ return;
+
+ WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
+ WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
+
+ temp |= FDI_BC_BIFURCATION_SELECT;
+ DRM_DEBUG_KMS("enabling fdi C rx\n");
+ I915_WRITE(SOUTH_CHICKEN1, temp);
+ POSTING_READ(SOUTH_CHICKEN1);
+}
+
+void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc)
+{
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ switch (intel_crtc->pipe) {
+ case PIPE_A:
+ break;
+ case PIPE_B:
+ if (intel_crtc->config.fdi_lanes > 2)
+ WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT);
+ else
+ cpt_enable_fdi_bc_bifurcation(dev);
+
+ break;
+ case PIPE_C:
+ cpt_enable_fdi_bc_bifurcation(dev);
+
+ break;
+ default:
+ BUG();
+ }
+}
+
+static bool pipe_has_enabled_pch(struct intel_crtc *crtc)
+{
+ return crtc->base.enabled && crtc->active &&
+ crtc->config.has_pch_encoder;
+}
+
+void ivb_update_fdi_bc_resources(struct drm_i915_private *dev_priv)
+{
+ struct intel_crtc *pipe_B_crtc =
+ to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
+ struct intel_crtc *pipe_C_crtc =
+ to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]);
+ uint32_t temp;
+
+ /*
+ * When everything is off disable fdi C so that we could enable fdi B
+ * with all lanes. Note that we don't care about enabled pipes without
+ * an enabled pch encoder.
+ */
+ if (!pipe_has_enabled_pch(pipe_B_crtc) &&
+ !pipe_has_enabled_pch(pipe_C_crtc)) {
+ WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
+ WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
+
+ temp = I915_READ(SOUTH_CHICKEN1);
+ temp &= ~FDI_BC_BIFURCATION_SELECT;
+ DRM_DEBUG_KMS("disabling fdi C rx\n");
+ I915_WRITE(SOUTH_CHICKEN1, temp);
+ }
+
+}
+
+void intel_fdi_normal_train(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 reg, temp;
+
+ /* enable normal train */
+ reg = FDI_TX_CTL(pipe);
+ temp = I915_READ(reg);
+ if (IS_IVYBRIDGE(dev)) {
+ temp &= ~FDI_LINK_TRAIN_NONE_IVB;
+ temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
+ } else {
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
+ }
+ I915_WRITE(reg, temp);
+
+ reg = FDI_RX_CTL(pipe);
+ temp = I915_READ(reg);
+ if (HAS_PCH_CPT(dev)) {
+ temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
+ temp |= FDI_LINK_TRAIN_NORMAL_CPT;
+ } else {
+ temp &= ~FDI_LINK_TRAIN_NONE;
+ temp |= FDI_LINK_TRAIN_NONE;
+ }
+ I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
+
+ /* wait one idle pattern time */
+ POSTING_READ(reg);
+ udelay(1000);
+
+ /* IVB wants error correction enabled */
+ if (IS_IVYBRIDGE(dev))
+ I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
+ FDI_FE_ERRC_ENABLE);
+}
+
+static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *pipe_B_crtc =
+ to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]);
+
+ DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
+ pipe_name(pipe), pipe_config->fdi_lanes);
+ if (pipe_config->fdi_lanes > 4) {
+ DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
+ pipe_name(pipe), pipe_config->fdi_lanes);
+ return false;
+ }
+
+ if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
+ if (pipe_config->fdi_lanes > 2) {
+ DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
+ pipe_config->fdi_lanes);
+ return false;
+ } else {
+ return true;
+ }
+ }
+
+ if (INTEL_INFO(dev)->num_pipes == 2)
+ return true;
+
+ /* Ivybridge 3 pipe is really complicated */
+ switch (pipe) {
+ case PIPE_A:
+ return true;
+ case PIPE_B:
+ if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled &&
+ pipe_config->fdi_lanes > 2) {
+ DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
+ pipe_name(pipe), pipe_config->fdi_lanes);
+ return false;
+ }
+ return true;
+ case PIPE_C:
+ if (!pipe_has_enabled_pch(pipe_B_crtc) ||
+ pipe_B_crtc->config.fdi_lanes <= 2) {
+ if (pipe_config->fdi_lanes > 2) {
+ DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
+ pipe_name(pipe), pipe_config->fdi_lanes);
+ return false;
+ }
+ } else {
+ DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
+ return false;
+ }
+ return true;
+ default:
+ BUG();
+ }
+}
+
+int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
+ struct intel_crtc_config *pipe_config)
+{
+ struct drm_device *dev = intel_crtc->base.dev;
+ struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode;
+ int lane, link_bw, fdi_dotclock;
+ bool setup_ok, needs_recompute = false;
+
+retry:
+ /* FDI is a binary signal running at ~2.7GHz, encoding
+ * each output octet as 10 bits. The actual frequency
+ * is stored as a divider into a 100MHz clock, and the
+ * mode pixel clock is stored in units of 1KHz.
+ * Hence the bw of each lane in terms of the mode signal
+ * is:
+ */
+ link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
+
+ fdi_dotclock = adjusted_mode->crtc_clock;
+
+ lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
+ pipe_config->pipe_bpp);
+
+ pipe_config->fdi_lanes = lane;
+
+ intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
+ link_bw, &pipe_config->fdi_m_n);
+
+ setup_ok = ironlake_check_fdi_lanes(intel_crtc->base.dev,
+ intel_crtc->pipe, pipe_config);
+ if (!setup_ok && pipe_config->pipe_bpp > 6*3) {
+ pipe_config->pipe_bpp -= 2*3;
+ DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
+ pipe_config->pipe_bpp);
+ needs_recompute = true;
+ pipe_config->bw_constrained = true;
+
+ goto retry;
+ }
+
+ if (needs_recompute)
+ return FDI_COMPUTE_CONFIG_RETRY;
+
+ return setup_ok ? 0 : -EINVAL;
+}
+
+static const long hsw_ddi_buf_ctl_values[] = {
+ DDI_BUF_EMP_400MV_0DB_HSW,
+ DDI_BUF_EMP_400MV_3_5DB_HSW,
+ DDI_BUF_EMP_400MV_6DB_HSW,
+ DDI_BUF_EMP_400MV_9_5DB_HSW,
+ DDI_BUF_EMP_600MV_0DB_HSW,
+ DDI_BUF_EMP_600MV_3_5DB_HSW,
+ DDI_BUF_EMP_600MV_6DB_HSW,
+ DDI_BUF_EMP_800MV_0DB_HSW,
+ DDI_BUF_EMP_800MV_3_5DB_HSW
+};
+
+/*
+ * Starting with Haswell, different DDI ports can work in FDI mode for
+ * connection to the PCH-located connectors. For this, it is necessary to train
+ * both the DDI port and PCH receiver for the desired DDI buffer settings.
+ *
+ * The recommended port to work in FDI mode is DDI E, which we use here. Also,
+ * please note that when FDI mode is active on DDI E, it shares 2 lines with
+ * DDI A (which is used for eDP)
+ */
+static void hsw_fdi_link_train(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ u32 temp, i, rx_ctl_val;
+
+ /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
+ * mode set "sequence for CRT port" document:
+ * - TP1 to TP2 time with the default value
+ * - FDI delay to 90h
+ *
+ * WaFDIAutoLinkSetTimingOverrride:hsw
+ */
+ I915_WRITE(_FDI_RXA_MISC, FDI_RX_PWRDN_LANE1_VAL(2) |
+ FDI_RX_PWRDN_LANE0_VAL(2) |
+ FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
+
+ /* Enable the PCH Receiver FDI PLL */
+ rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
+ FDI_RX_PLL_ENABLE |
+ FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
+ I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
+ POSTING_READ(_FDI_RXA_CTL);
+ udelay(220);
+
+ /* Switch from Rawclk to PCDclk */
+ rx_ctl_val |= FDI_PCDCLK;
+ I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
+
+ /* Configure Port Clock Select */
+ I915_WRITE(PORT_CLK_SEL(PORT_E), intel_crtc->ddi_pll_sel);
+
+ /* Start the training iterating through available voltages and emphasis,
+ * testing each value twice. */
+ for (i = 0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values) * 2; i++) {
+ /* Configure DP_TP_CTL with auto-training */
+ I915_WRITE(DP_TP_CTL(PORT_E),
+ DP_TP_CTL_FDI_AUTOTRAIN |
+ DP_TP_CTL_ENHANCED_FRAME_ENABLE |
+ DP_TP_CTL_LINK_TRAIN_PAT1 |
+ DP_TP_CTL_ENABLE);
+
+ /* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
+ * DDI E does not support port reversal, the functionality is
+ * achieved on the PCH side in FDI_RX_CTL, so no need to set the
+ * port reversal bit */
+ I915_WRITE(DDI_BUF_CTL(PORT_E),
+ DDI_BUF_CTL_ENABLE |
+ ((intel_crtc->config.fdi_lanes - 1) << 1) |
+ hsw_ddi_buf_ctl_values[i / 2]);
+ POSTING_READ(DDI_BUF_CTL(PORT_E));
+
+ udelay(600);
+
+ /* Program PCH FDI Receiver TU */
+ I915_WRITE(_FDI_RXA_TUSIZE1, TU_SIZE(64));
+
+ /* Enable PCH FDI Receiver with auto-training */
+ rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
+ I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
+ POSTING_READ(_FDI_RXA_CTL);
+
+ /* Wait for FDI receiver lane calibration */
+ udelay(30);
+
+ /* Unset FDI_RX_MISC pwrdn lanes */
+ temp = I915_READ(_FDI_RXA_MISC);
+ temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
+ I915_WRITE(_FDI_RXA_MISC, temp);
+ POSTING_READ(_FDI_RXA_MISC);
+
+ /* Wait for FDI auto training time */
+ udelay(5);
+
+ temp = I915_READ(DP_TP_STATUS(PORT_E));
+ if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
+ DRM_DEBUG_KMS("FDI link training done on step %d\n", i);
+
+ /* Enable normal pixel sending for FDI */
+ I915_WRITE(DP_TP_CTL(PORT_E),
+ DP_TP_CTL_FDI_AUTOTRAIN |
+ DP_TP_CTL_LINK_TRAIN_NORMAL |
+ DP_TP_CTL_ENHANCED_FRAME_ENABLE |
+ DP_TP_CTL_ENABLE);
+
+ return;
+ }
+
+ temp = I915_READ(DDI_BUF_CTL(PORT_E));
+ temp &= ~DDI_BUF_CTL_ENABLE;
+ I915_WRITE(DDI_BUF_CTL(PORT_E), temp);
+ POSTING_READ(DDI_BUF_CTL(PORT_E));
+
+ /* Disable DP_TP_CTL and FDI_RX_CTL and retry */
+ temp = I915_READ(DP_TP_CTL(PORT_E));
+ temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
+ temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
+ I915_WRITE(DP_TP_CTL(PORT_E), temp);
+ POSTING_READ(DP_TP_CTL(PORT_E));
+
+ intel_wait_ddi_buf_idle(dev_priv, PORT_E);
+
+ rx_ctl_val &= ~FDI_RX_ENABLE;
+ I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
+ POSTING_READ(_FDI_RXA_CTL);
+
+ /* Reset FDI_RX_MISC pwrdn lanes */
+ temp = I915_READ(_FDI_RXA_MISC);
+ temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
+ temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
+ I915_WRITE(_FDI_RXA_MISC, temp);
+ POSTING_READ(_FDI_RXA_MISC);
+ }
+
+ DRM_ERROR("FDI link training failed!\n");
+}
+
+void intel_fdi_init(struct drm_i915_private *dev_priv)
+{
+ struct drm_device *dev = dev_priv->dev;
+
+ if (!HAS_PCH_SPLIT(dev))
+ return;
+
+ if (IS_GEN5(dev))
+ dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
+ else if (IS_GEN6(dev))
+ dev_priv->display.fdi_link_train = gen6_fdi_link_train;
+ else if (IS_IVYBRIDGE(dev))
+ /* FIXME: detect B0+ stepping and use auto training */
+ dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
+ else if (IS_HASWELL(dev) || IS_GEN8(dev))
+ dev_priv->display.fdi_link_train = hsw_fdi_link_train;
+}
--
1.9.0
More information about the Intel-gfx
mailing list