[Intel-gfx] [PATCH v11 2/6] drm/i915: Parse EDID probed modes for DRRS support
Daniel Vetter
daniel at ffwll.ch
Thu Apr 10 10:55:16 CEST 2014
On Thu, Apr 10, 2014 at 11:42:04AM +0300, Jani Nikula wrote:
>
> Reviewed-by: Jani Nikula <jani.nikula at intel.com>
>
>
> On Sat, 05 Apr 2014, Vandana Kannan <vandana.kannan at intel.com> wrote:
> > From: Pradeep Bhat <pradeep.bhat at intel.com>
> >
> > This patch and finds out the lowest refresh rate supported for the resolution
> > same as the fixed_mode.
> > It also checks the VBT fields to see if panel supports seamless DRRS or not.
> > Based on above data it marks whether eDP panel supports seamless DRRS or not.
> > This information is needed for supporting seamless DRRS switch for certain
> > power saving usecases. This patch is tested by enabling the DRM logs and
> > user should see whether Seamless DRRS is supported or not.
> >
> > v2: Daniel's review comments
> > Modified downclock deduction based on intel_find_panel_downclock
> >
> > v3: Chris's review comments
> > Moved edp_downclock_avail and edp_downclock to intel_panel
> >
> > v4: Jani's review comments.
> > Changed name of the enum edp_panel_type to drrs_support type.
> > Change is_drrs_supported to drrs_support of type enum drrs_support_type.
> >
> > v5: Incorporated Jani's review comments
> > Modify intel_dp_drrs_initialize to return downclock mode. Support for Gen7
> > and above.
> >
> > v6: Incorporated Chris's review comments.
> > Changed initialize to init in intel_drrs_initialize
> >
> > v7: Incorporated Jani's review comments.
> > Removed edp_downclock and edp_downclock_avail. Return NULL explicitly.
> > Make drrs_state and unnamed struct. Move Gen based check inside drrs_init.
> >
> > v8: Made changes to track PSR enable/disable throughout system use (instead
> > of just in the init sequence) for disabling/enabling DRRS. Jani's review
> > comments.
> >
> > v9: PSR tracking will be done as part of idleness detection patch. Removed
> > PSR state tracker in i915_drrs. Jani's review comments.
> >
> > v10: Added log for DRRS not supported in drrs_init
> >
> > v11: Modification in drrs_init. suggested by Jani
> >
> > Signed-off-by: Pradeep Bhat <pradeep.bhat at intel.com>
> > Signed-off-by: Vandana Kannan <vandana.kannan at intel.com>
> > Cc: Jani Nikula <jani.nikula at linux.intel.com>
Queued for -next, thanks for the patch.
-Daniel
> > ---
> > drivers/gpu/drm/i915/intel_dp.c | 44 +++++++++++++++++++++++++++++++++++++++-
> > drivers/gpu/drm/i915/intel_drv.h | 16 +++++++++++++++
> > 2 files changed, 59 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> > index e48d47c..517a8cc 100644
> > --- a/drivers/gpu/drm/i915/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/intel_dp.c
> > @@ -3632,6 +3632,42 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
> > I915_READ(pp_div_reg));
> > }
> >
> > +static struct drm_display_mode *
> > +intel_dp_drrs_init(struct intel_digital_port *intel_dig_port,
> > + struct intel_connector *intel_connector,
> > + struct drm_display_mode *fixed_mode)
> > +{
> > + struct drm_connector *connector = &intel_connector->base;
> > + struct intel_dp *intel_dp = &intel_dig_port->dp;
> > + struct drm_device *dev = intel_dig_port->base.base.dev;
> > + struct drm_i915_private *dev_priv = dev->dev_private;
> > + struct drm_display_mode *downclock_mode = NULL;
> > +
> > + if (INTEL_INFO(dev)->gen <= 6) {
> > + DRM_DEBUG_KMS("DRRS supported for Gen7 and above\n");
> > + return NULL;
> > + }
> > +
> > + if (dev_priv->vbt.drrs_type != SEAMLESS_DRRS_SUPPORT) {
> > + DRM_INFO("VBT doesn't support DRRS\n");
> > + return NULL;
> > + }
> > +
> > + downclock_mode = intel_find_panel_downclock
> > + (dev, fixed_mode, connector);
> > +
> > + if (!downclock_mode) {
> > + DRM_INFO("DRRS not supported\n");
> > + return NULL;
> > + }
> > +
> > + intel_dp->drrs_state.type = dev_priv->vbt.drrs_type;
> > +
> > + intel_dp->drrs_state.refresh_rate_type = DRRS_HIGH_RR;
> > + DRM_INFO("seamless DRRS supported for eDP panel.\n");
> > + return downclock_mode;
> > +}
> > +
> > static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> > struct intel_connector *intel_connector,
> > struct edp_power_seq *power_seq)
> > @@ -3641,10 +3677,13 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> > struct drm_device *dev = intel_dig_port->base.base.dev;
> > struct drm_i915_private *dev_priv = dev->dev_private;
> > struct drm_display_mode *fixed_mode = NULL;
> > + struct drm_display_mode *downclock_mode = NULL;
> > bool has_dpcd;
> > struct drm_display_mode *scan;
> > struct edid *edid;
> >
> > + intel_dp->drrs_state.type = DRRS_NOT_SUPPORTED;
> > +
> > if (!is_edp(intel_dp))
> > return true;
> >
> > @@ -3687,6 +3726,9 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> > list_for_each_entry(scan, &connector->probed_modes, head) {
> > if ((scan->type & DRM_MODE_TYPE_PREFERRED)) {
> > fixed_mode = drm_mode_duplicate(dev, scan);
> > + downclock_mode = intel_dp_drrs_init(
> > + intel_dig_port,
> > + intel_connector, fixed_mode);
> > break;
> > }
> > }
> > @@ -3700,7 +3742,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> > }
> > mutex_unlock(&dev->mode_config.mutex);
> >
> > - intel_panel_init(&intel_connector->panel, fixed_mode, NULL);
> > + intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
> > intel_panel_setup_backlight(connector);
> >
> > return true;
> > diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> > index 42762b7..286d4fb 100644
> > --- a/drivers/gpu/drm/i915/intel_drv.h
> > +++ b/drivers/gpu/drm/i915/intel_drv.h
> > @@ -482,6 +482,17 @@ struct intel_hdmi {
> >
> > #define DP_MAX_DOWNSTREAM_PORTS 0x10
> >
> > +/**
> > + * HIGH_RR is the highest eDP panel refresh rate read from EDID
> > + * LOW_RR is the lowest eDP panel refresh rate found from EDID
> > + * parsing for same resolution.
> > + */
> > +enum edp_drrs_refresh_rate_type {
> > + DRRS_HIGH_RR,
> > + DRRS_LOW_RR,
> > + DRRS_MAX_RR, /* RR count */
> > +};
> > +
> > struct intel_dp {
> > uint32_t output_reg;
> > uint32_t aux_ch_ctl_reg;
> > @@ -520,6 +531,11 @@ struct intel_dp {
> > bool has_aux_irq,
> > int send_bytes,
> > uint32_t aux_clock_divider);
> > + struct {
> > + enum drrs_support_type type;
> > + enum edp_drrs_refresh_rate_type refresh_rate_type;
> > + } drrs_state;
> > +
> > };
> >
> > struct intel_digital_port {
> > --
> > 1.9.1
> >
>
> --
> Jani Nikula, Intel Open Source Technology Center
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
More information about the Intel-gfx
mailing list