[Intel-gfx] [PATCH 1/2] drm/i915: Don't set the 8to6 dither flag when not scaling

[Daniel Vetter]

On Mon, Jan 27, 2014 at 10:00:30AM +0100, Daniel Vetter wrote:
> Apparently we really only need this when the pfit is enabled, at least
> I couldn't dicern any difference here. Furthermore the hacks we have
> to reconstruct this bit is a bit glaring, and probably only works
> because we can't move the lvds port to any other pipe than pipe B on
> gen2/3.
> 
> So let's just rip this out.
> 
> Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>

I've just written this exact patch again, so figured I might as well merge
it. r-b still appreciated ...
-Daniel

> ---
>  drivers/gpu/drm/i915/intel_lvds.c  | 7 -------
>  drivers/gpu/drm/i915/intel_panel.c | 8 ++++----
>  2 files changed, 4 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
> index 8bcb93a2a9f6..8a3ebe940a74 100644
> --- a/drivers/gpu/drm/i915/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/intel_lvds.c
> @@ -111,13 +111,6 @@ static void intel_lvds_get_config(struct intel_encoder *encoder,
>  
>  	pipe_config->adjusted_mode.flags |= flags;
>  
> -	/* gen2/3 store dither state in pfit control, needs to match */
> -	if (INTEL_INFO(dev)->gen < 4) {
> -		tmp = I915_READ(PFIT_CONTROL);
> -
> -		pipe_config->gmch_pfit.control |= tmp & PANEL_8TO6_DITHER_ENABLE;
> -	}
> -
>  	dotclock = pipe_config->port_clock;
>  
>  	if (HAS_PCH_SPLIT(dev_priv->dev))
> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> index 9f83ab06fb5e..41116753f1c0 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -308,16 +308,16 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc,
>  		pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) |
>  				 PFIT_FILTER_FUZZY);
>  
> +	/* Make sure pre-965 set dither correctly for 18bpp panels. */
> +	if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18)
> +		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
> +
>  out:
>  	if ((pfit_control & PFIT_ENABLE) == 0) {
>  		pfit_control = 0;
>  		pfit_pgm_ratios = 0;
>  	}
>  
> -	/* Make sure pre-965 set dither correctly for 18bpp panels. */
> -	if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18)
> -		pfit_control |= PANEL_8TO6_DITHER_ENABLE;
> -
>  	pipe_config->gmch_pfit.control = pfit_control;
>  	pipe_config->gmch_pfit.pgm_ratios = pfit_pgm_ratios;
>  	pipe_config->gmch_pfit.lvds_border_bits = border;
> -- 
> 1.8.4.rc3
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch