[Intel-gfx] [PATCH v2 00/25] vlv: add support for RPM

Imre Deak imre.deak at intel.com
Mon Apr 14 19:24:21 CEST 2014


For a description of this patchset see the previous cover letter [1].

Tested on HSW (non-ULT), VLV with igt/kms_flip and pm_pc8.

v2:
- addressed comments about getting the proper runtime PM references in
  debugfs (Daniel, Paulo, Ville)
- disable RPM if RC6 is disabled for all platforms, not just VLV
  (Daniel)
- refactored the runtime PM callbacks pulling platform independent
  teardown/re-init code to the generic runtime suspend/resume callbacks
  (Daniel)
- fixed a couple of issues I bumped into while checking the RC6/RPS
  and the GPU reset error capturing path

[1]
http://lists.freedesktop.org/archives/intel-gfx/2014-April/043208.html

Imre Deak (25):
  drm/i915: vlv: clean up GTLC wake control/status register macros
  drm/i915: vlv: clear master interrupt flag when disabling interrupts
  drm/i915: vlv: add RC6 residency counters
  drm/i915: fix the RC6 status debug print
  drm/i915: remove the i915_dpio debugfs entry
  drm/i915: get a runtime PM ref for debugfs entries where needed
  drm/i915: move getting struct_mutex lower in the callstack during GPU
    reset
  drm/i915: get a runtime PM ref for the deferred GT powersave enabling
  drm/i915: get a runtime PM ref for the deferred GPU reset work
  drm/i915: gen2: move error capture of IER to its correct place
  drm/i915: add missing error capturing of the PIPESTAT reg
  drm/i915: vlv: check port power domain instead of only D0 for eDP VDD
    on
  drm/i915: fix unbalanced GT powersave enable / disable calls
  drm/i915: sanitize enable_rc6 option
  drm/i915: disable runtime PM if RC6 is disabled
  drm/i915: make runtime PM interrupt enable/disable platform
    independent
  drm/i915: factor out gen6_update_ring_freq
  drm/i915: make runtime PM swizzling/ring_freq init platform
    independent
  drm/i915: reinit GT power save during resume
  drm/i915: vlv: setup RPS min/max frequencies once during init time
  drm/i915: vlv: factor out vlv_force_gfx_clock
  drm/i915: vlv: increase timeout when forcing on the GFX clock
  drm/i915: add various missing GTI/Gunit register definitions
  drm/i915: propagate the error code from runtime PM callbacks
  drm/i915: vlv: add runtime PM support

 drivers/gpu/drm/i915/i915_debugfs.c   |  63 ++---
 drivers/gpu/drm/i915/i915_dma.c       |   8 +-
 drivers/gpu/drm/i915/i915_drv.c       | 452 +++++++++++++++++++++++++++++++---
 drivers/gpu/drm/i915/i915_drv.h       |  64 ++++-
 drivers/gpu/drm/i915/i915_gem.c       |   5 +-
 drivers/gpu/drm/i915/i915_gpu_error.c |  11 +-
 drivers/gpu/drm/i915/i915_irq.c       |  23 +-
 drivers/gpu/drm/i915/i915_reg.h       |  56 ++++-
 drivers/gpu/drm/i915/i915_sysfs.c     |   4 +
 drivers/gpu/drm/i915/intel_display.c  |   9 +-
 drivers/gpu/drm/i915/intel_dp.c       |   6 +-
 drivers/gpu/drm/i915/intel_drv.h      |   2 +
 drivers/gpu/drm/i915/intel_pm.c       | 185 ++++++++++----
 13 files changed, 737 insertions(+), 151 deletions(-)

-- 
1.8.4




More information about the Intel-gfx mailing list