[Intel-gfx] [PATCH v2 20/25] drm/i915: vlv: setup RPS min/max frequencies once during init time

Imre Deak imre.deak at intel.com
Mon Apr 14 19:24:41 CEST 2014


When enabling runtime PM on VLV, GT power save enabling becomes relatively
frequent, so optimize it a bit.

Signed-off-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 66 +++++++++++++++++++++++++----------------
 1 file changed, 41 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index f88d64d..bc38213 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3698,6 +3698,45 @@ static void valleyview_cleanup_pctx(struct drm_device *dev)
 	dev_priv->vlv_pctx = NULL;
 }
 
+static void valleyview_init_gt_powersave(struct drm_device *dev)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	valleyview_setup_pctx(dev);
+
+	mutex_lock(&dev_priv->rps.hw_lock);
+
+	dev_priv->rps.max_freq = valleyview_rps_max_freq(dev_priv);
+	dev_priv->rps.rp0_freq = dev_priv->rps.max_freq;
+	DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n",
+			 vlv_gpu_freq(dev_priv, dev_priv->rps.max_freq),
+			 dev_priv->rps.max_freq);
+
+	dev_priv->rps.efficient_freq = valleyview_rps_rpe_freq(dev_priv);
+	DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n",
+			 vlv_gpu_freq(dev_priv, dev_priv->rps.efficient_freq),
+			 dev_priv->rps.efficient_freq);
+
+	dev_priv->rps.min_freq = valleyview_rps_min_freq(dev_priv);
+	DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
+			 vlv_gpu_freq(dev_priv, dev_priv->rps.min_freq),
+			 dev_priv->rps.min_freq);
+
+	/* Preserve min/max settings in case of re-init */
+	if (dev_priv->rps.max_freq_softlimit == 0)
+		dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq;
+
+	if (dev_priv->rps.min_freq_softlimit == 0)
+		dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq;
+
+	mutex_unlock(&dev_priv->rps.hw_lock);
+}
+
+static void valleyview_cleanup_gt_powersave(struct drm_device *dev)
+{
+	valleyview_cleanup_pctx(dev);
+}
+
 static void valleyview_enable_rps(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3764,29 +3803,6 @@ static void valleyview_enable_rps(struct drm_device *dev)
 			 vlv_gpu_freq(dev_priv, dev_priv->rps.cur_freq),
 			 dev_priv->rps.cur_freq);
 
-	dev_priv->rps.max_freq = valleyview_rps_max_freq(dev_priv);
-	dev_priv->rps.rp0_freq  = dev_priv->rps.max_freq;
-	DRM_DEBUG_DRIVER("max GPU freq: %d MHz (%u)\n",
-			 vlv_gpu_freq(dev_priv, dev_priv->rps.max_freq),
-			 dev_priv->rps.max_freq);
-
-	dev_priv->rps.efficient_freq = valleyview_rps_rpe_freq(dev_priv);
-	DRM_DEBUG_DRIVER("RPe GPU freq: %d MHz (%u)\n",
-			 vlv_gpu_freq(dev_priv, dev_priv->rps.efficient_freq),
-			 dev_priv->rps.efficient_freq);
-
-	dev_priv->rps.min_freq = valleyview_rps_min_freq(dev_priv);
-	DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
-			 vlv_gpu_freq(dev_priv, dev_priv->rps.min_freq),
-			 dev_priv->rps.min_freq);
-
-	/* Preserve min/max settings in case of re-init */
-	if (dev_priv->rps.max_freq_softlimit == 0)
-		dev_priv->rps.max_freq_softlimit = dev_priv->rps.max_freq;
-
-	if (dev_priv->rps.min_freq_softlimit == 0)
-		dev_priv->rps.min_freq_softlimit = dev_priv->rps.min_freq;
-
 	DRM_DEBUG_DRIVER("setting GPU freq to %d MHz (%u)\n",
 			 vlv_gpu_freq(dev_priv, dev_priv->rps.efficient_freq),
 			 dev_priv->rps.efficient_freq);
@@ -4530,13 +4546,13 @@ void intel_init_gt_powersave(struct drm_device *dev)
 	i915.enable_rc6 = sanitize_rc6_option(dev, i915.enable_rc6);
 
 	if (IS_VALLEYVIEW(dev))
-		valleyview_setup_pctx(dev);
+		valleyview_init_gt_powersave(dev);
 }
 
 void intel_cleanup_gt_powersave(struct drm_device *dev)
 {
 	if (IS_VALLEYVIEW(dev))
-		valleyview_cleanup_pctx(dev);
+		valleyview_cleanup_gt_powersave(dev);
 }
 
 void intel_disable_gt_powersave(struct drm_device *dev)
-- 
1.8.4




More information about the Intel-gfx mailing list