[Intel-gfx] [PATCH 17/66] drm/i915/dp: Move port A pll setup to g4x_pre_enable_dp

[Daniel Vetter]

Only ilk/snb/ivb need the port A pll setup, so move it to the
pre_enable hook for those platforms. We can savely do this since on
those platforms there's nothing that touches the hardware between the
encoder->mode_set and the encoder->pre_enable calls.

Also add a comment that port A is ilk+ only.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_dp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index fded70572ff2..eec1afb72a57 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -973,9 +973,6 @@ static void intel_dp_mode_set(struct intel_encoder *encoder)
 	} else {
 		intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
 	}
-
-	if (port == PORT_A && !IS_VALLEYVIEW(dev))
-		ironlake_set_pll_cpu_edp(intel_dp);
 }
 
 #define IDLE_ON_MASK		(PP_ON | PP_SEQUENCE_MASK | 0                     | PP_SEQUENCE_STATE_MASK)
@@ -1876,8 +1873,11 @@ static void g4x_pre_enable_dp(struct intel_encoder *encoder)
 	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
 	struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
 
-	if (dport->port == PORT_A)
+	/* Only ilk+ has port A */
+	if (dport->port == PORT_A) {
+		ironlake_set_pll_cpu_edp(intel_dp);
 		ironlake_edp_pll_on(intel_dp);
+	}
 }
 
 static void vlv_pre_enable_dp(struct intel_encoder *encoder)
-- 
1.8.1.4