[Intel-gfx] [PATCH 34/66] drm/i915: Extract i9xx_set_pll_dividers

Daniel Vetter daniel.vetter at ffwll.ch
Thu Apr 24 23:55:10 CEST 2014


These two writes are the very last hw writes from the
->crtc_modeset_callback on pre-gen5 hardware. As usual vlv is a bit
different, so this here is just warm-up.

Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
 drivers/gpu/drm/i915/intel_display.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index b6dbb6c4c1fb..057f4d6a3e1f 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -4433,6 +4433,15 @@ static void valleyview_crtc_enable(struct drm_crtc *crtc)
 	drm_vblank_on(dev, pipe);
 }
 
+static void i9xx_set_pll_dividers(struct intel_crtc *crtc)
+{
+	struct drm_device *dev = crtc->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	I915_WRITE(FP0(crtc->pipe), crtc->config.dpll_hw_state.fp0);
+	I915_WRITE(FP1(crtc->pipe), crtc->config.dpll_hw_state.fp1);
+}
+
 static void i9xx_crtc_enable(struct drm_crtc *crtc)
 {
 	struct drm_device *dev = crtc->dev;
@@ -4448,6 +4457,8 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc)
 	if (intel_crtc->active)
 		return;
 
+	i9xx_set_pll_dividers(intel_crtc);
+
 	/* Set up the display plane register */
 	dspcntr = DISPPLANE_GAMMA_ENABLE;
 
@@ -5112,8 +5123,6 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
 				     intel_clock_t *reduced_clock)
 {
 	struct drm_device *dev = crtc->base.dev;
-	struct drm_i915_private *dev_priv = dev->dev_private;
-	int pipe = crtc->pipe;
 	u32 fp, fp2 = 0;
 
 	if (IS_PINEVIEW(dev)) {
@@ -5126,17 +5135,14 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
 			fp2 = i9xx_dpll_compute_fp(reduced_clock);
 	}
 
-	I915_WRITE(FP0(pipe), fp);
 	crtc->config.dpll_hw_state.fp0 = fp;
 
 	crtc->lowfreq_avail = false;
 	if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) &&
 	    reduced_clock && i915.powersave) {
-		I915_WRITE(FP1(pipe), fp2);
 		crtc->config.dpll_hw_state.fp1 = fp2;
 		crtc->lowfreq_avail = true;
 	} else {
-		I915_WRITE(FP1(pipe), fp);
 		crtc->config.dpll_hw_state.fp1 = fp;
 	}
 }
-- 
1.8.1.4




More information about the Intel-gfx mailing list