[Intel-gfx] [PATCH v2 53/71] drm/i915/chv: Configure crtc_mask correctly for CHV

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

On CHV pipe C can driver only port D, and pipes A and B can drivbe only
ports B and C. Configure the crtc_mask appropriately to reflect that.

v2: Moar braces (Jani)

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_dp.c   | 9 ++++++++-
 drivers/gpu/drm/i915/intel_hdmi.c | 9 ++++++++-
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 27e0c86..a3cb9d8 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -4079,7 +4079,14 @@ intel_dp_init(struct drm_device *dev, int output_reg, enum port port)
 	intel_dig_port->dp.output_reg = output_reg;
 
 	intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT;
-	intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+	if (IS_CHERRYVIEW(dev)) {
+		if (port == PORT_D)
+			intel_encoder->crtc_mask = 1 << 2;
+		else
+			intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+	} else {
+		intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+	}
 	intel_encoder->cloneable = 0;
 	intel_encoder->hot_plug = intel_dp_hot_plug;
 
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 1e8d2a9..d4e020e 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1452,7 +1452,14 @@ void intel_hdmi_init(struct drm_device *dev, int hdmi_reg, enum port port)
 	}
 
 	intel_encoder->type = INTEL_OUTPUT_HDMI;
-	intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+	if (IS_CHERRYVIEW(dev)) {
+		if (port == PORT_D)
+			intel_encoder->crtc_mask = 1 << 2;
+		else
+			intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
+	} else {
+		intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
+	}
 	intel_encoder->cloneable = 1 << INTEL_OUTPUT_ANALOG;
 	/*
 	 * BSpec is unclear about HDMI+HDMI cloning on g4x, but it seems
-- 
1.8.3.2