[Intel-gfx] [PATCH v2 23/25] drm/i915: add various missing GTI/Gunit register definitions
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Apr 30 16:32:08 CEST 2014
On Mon, Apr 14, 2014 at 08:24:44PM +0300, Imre Deak wrote:
> Needed by the VLV S0ix context save/restore helpers.
>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 43 ++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 42 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index f183746..cba0afd 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -92,6 +92,9 @@
> #define GEN6_MBC_SNPCR_LOW (2<<21)
> #define GEN6_MBC_SNPCR_MIN (3<<21) /* only 1/16th of the cache is shared */
>
> +#define GEN7_G3DCTL 0x9024
> +#define GEN7_GSCKGCTL 0x9028
AFAICS these are VLV specific. There are some other registers at
the same offset on other platforms.
> +
> #define GEN6_MBCTL 0x0907c
> #define GEN6_MBCTL_ENABLE_BOOT_FETCH (1 << 4)
> #define GEN6_MBCTL_CTX_FETCH_NEEDED (1 << 3)
> @@ -785,9 +788,20 @@ enum punit_power_well {
> #define RING_MAX_IDLE(base) ((base)+0x54)
> #define RING_HWS_PGA(base) ((base)+0x80)
> #define RING_HWS_PGA_GEN6(base) ((base)+0x2080)
> -#define ARB_MODE 0x04030
> +
> +#define GEN7_WR_WATERMARK 0x4028
> +#define GEN7_GFX_PRIO_CTRL 0x402C
> +#define ARB_MODE 0x4030
> #define ARB_MODE_SWIZZLE_SNB (1<<4)
> #define ARB_MODE_SWIZZLE_IVB (1<<5)
> +#define GEN7_GFX_PEND_TLB0 0x4034
> +#define GEN7_GFX_PEND_TLB1 0x4038
I was going to say these are already in gen6, but looks like the offset
changed slightly in gen7. So the gen7 name is good here.
> +/* L3, CVS, ZTLB, RCC, CASC LRA min, max values */
> +#define GEN7_LRA_LIMITS_BASE 0x403C
> +#define GEN7_LRA_LIMITS_REG_NUM 13
> +#define GEN7_MEDIA_MAX_REQ_COUNT 0x4070
> +#define GEN7_GFX_MAX_REQ_COUNT 0x4074
> +
> #define GAMTARBMODE 0x04a08
> #define ARB_MODE_BWGTLB_DISABLE (1<<9)
> #define ARB_MODE_SWIZZLE_BDW (1<<1)
> @@ -822,6 +836,9 @@ enum punit_power_well {
> #define RING_WAIT_I8XX (1<<0) /* gen2, PRBx_HEAD */
> #define RING_WAIT (1<<11) /* gen3+, PRBx_CTL */
> #define RING_WAIT_SEMAPHORE (1<<10) /* gen6+ */
> +
> +#define GEN7_TLB_RD_ADDR 0x4700
> +
> #if 0
> #define PRB0_TAIL 0x02030
> #define PRB0_HEAD 0x02034
> @@ -948,6 +965,8 @@ enum punit_power_well {
>
> #define VLV_DISPLAY_BASE 0x180000
>
> +#define VLV_GU_CTL0 (VLV_DISPLAY_BASE + 0x2030)
> +#define VLV_GU_CTL1 (VLV_DISPLAY_BASE + 0x2034)
> #define SCPD0 0x0209c /* 915+ only */
> #define IER 0x020a0
> #define IIR 0x020a4
> @@ -955,6 +974,7 @@ enum punit_power_well {
> #define ISR 0x020ac
> #define VLV_GUNIT_CLOCK_GATE (VLV_DISPLAY_BASE + 0x2060)
> #define GCFG_DIS (1<<8)
> +#define VLV_GUNIT_CLOCK_GATE2 (VLV_DISPLAY_BASE + 0x2064)
> #define VLV_IIR_RW (VLV_DISPLAY_BASE + 0x2084)
> #define VLV_IER (VLV_DISPLAY_BASE + 0x20a0)
> #define VLV_IIR (VLV_DISPLAY_BASE + 0x20a4)
> @@ -4988,6 +5008,8 @@ enum punit_power_well {
>
> #define EDP_LINK_TRAIN_VOL_EMP_MASK_IVB (0x3f<<22)
>
> +#define VLV_PMWGICZ 0x1300a4
> +
> #define FORCEWAKE 0xA18C
> #define FORCEWAKE_VLV 0x1300b0
> #define FORCEWAKE_ACK_VLV 0x1300b4
> @@ -5011,6 +5033,7 @@ enum punit_power_well {
> #define FORCEWAKE_MT_ACK 0x130040
> #define ECOBUS 0xa180
> #define FORCEWAKE_MT_ENABLE (1<<5)
> +#define VLV_SPAREG2H 0xA194
>
> #define GTFIFODBG 0x120000
> #define GT_FIFO_SBDROPERR (1<<6)
> @@ -5040,12 +5063,24 @@ enum punit_power_well {
> # define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12)
> # define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11)
>
> +#define GEN7_UCGCTL3 0x9408
> +
> #define GEN7_UCGCTL4 0x940c
> #define GEN7_L3BANK2X_CLOCK_GATE_DISABLE (1<<25)
SNB already has UCGCTL3 and 4. So even the old name is a bit wrong.
>
> +#define GEN7_RCGCTL1 0x9410
> +#define GEN7_RCGCTL2 0x9414
> +#define GEN7_RSTCTL 0x9420
These too already exist on gen6.
Same for GEN7_MISCCPCTL which should probably also be moved here and
renamed.
> +
> #define GEN8_UCGCTL6 0x9430
> #define GEN8_SDEUNIT_CLOCK_GATE_DISABLE (1<<14)
>
> +#define GEN7_GFXPAUSE 0xA000
> +#define GEN7_RPDEUHWTC 0xA080
> +#define GEN7_RPDEUC 0xA084
These three are already listed in my snb pm guide, so gen6. Also
should be inserted into the correct spot numerically.
> +
> +#define VLV_PWRDWNUPCTL 0xA294
> +
> #define GEN6_RPNSWREQ 0xA008
> #define GEN6_TURBO_DISABLE (1<<31)
> #define GEN6_FREQUENCY(x) ((x)<<25)
> @@ -5098,6 +5133,7 @@ enum punit_power_well {
> #define GEN6_RP_UP_EI 0xA068
> #define GEN6_RP_DOWN_EI 0xA06C
> #define GEN6_RP_IDLE_HYSTERSIS 0xA070
> +#define GEN7_RPDEUCSW 0xA088
This one isn't listed in the snb pm guide, but I get the impression
it should also say gen6 here.
> #define GEN6_RC_STATE 0xA094
> #define GEN6_RC1_WAKE_RATE_LIMIT 0xA098
> #define GEN6_RC6_WAKE_RATE_LIMIT 0xA09C
> @@ -5105,9 +5141,11 @@ enum punit_power_well {
> #define GEN6_RC_EVALUATION_INTERVAL 0xA0A8
> #define GEN6_RC_IDLE_HYSTERSIS 0xA0AC
> #define GEN6_RC_SLEEP 0xA0B0
> +#define VLV_RCUBMABDTMR 0xA0B0
Also seems like it should be gen6.
All the rest look fine.
> #define GEN6_RC1e_THRESHOLD 0xA0B4
> #define GEN6_RC6_THRESHOLD 0xA0B8
> #define GEN6_RC6p_THRESHOLD 0xA0BC
> +#define VLV_RCEDATA 0xA0BC
> #define GEN6_RC6pp_THRESHOLD 0xA0C0
> #define GEN6_PMINTRMSK 0xA168
>
> @@ -5126,6 +5164,9 @@ enum punit_power_well {
> GEN6_PM_RP_DOWN_THRESHOLD | \
> GEN6_PM_RP_DOWN_TIMEOUT)
>
> +#define GEN7_GT_SCRATCH_BASE 0x4F100
> +#define GEN7_GT_SCRATCH_REG_NUM 8
> +
> #define VLV_GTLC_SURVIVABILITY_REG 0x130098
> #define VLV_GFX_CLK_STATUS_BIT (1<<3)
> #define VLV_GFX_CLK_FORCE_ON_BIT (1<<2)
> --
> 1.8.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list