[Intel-gfx] [PATCH] drm: HDMI pixel replication modes now hactive of 720 for pixel replication

Ville Syrjälä ville.syrjala at linux.intel.com
Tue Aug 12 13:07:57 CEST 2014


On Tue, Jul 29, 2014 at 02:58:23PM -0700, clinton.a.taylor at intel.com wrote:
> From: Clint Taylor <clinton.a.taylor at intel.com>
> 
> CEA SD interlaced modes use a horizontal 720 pixels that are pixel replicated to 1440. The current driver reports 1440 pixel to the OS and does not set pixel replicated modes.
> 
> Signed-off-by: Clint Taylor <clinton.a.taylor at intel.com>
> ---
>  drivers/gpu/drm/drm_edid.c        |   68 ++++++++++++++++++-------------------
>  drivers/gpu/drm/i915/intel_hdmi.c |   13 +++++++
>  2 files changed, 47 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index dfa9769..5233f4c 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -632,26 +632,26 @@ static const struct drm_display_mode edid_cea_modes[] = {
>  		   DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC |
>  			DRM_MODE_FLAG_INTERLACE),
>  	  .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, },
> -	/* 6 - 1440x480i at 60Hz */
> -	{ DRM_MODE("1440x480i", DRM_MODE_TYPE_DRIVER, 27000, 1440, 1478,
> +	/* 6 - 720(1440)x480i at 60Hz */
> +	{ DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 27000, 720, 1478,

I think the best thing here might be to halve all the horizontal
timings (and the clock), and maybe do it with an explicit /2 to
remind people that this is a bit special, and also the spec lists
the doubled timings, so it's maybe a bit easier to compare with the
spec that way.

So perhaps something like this:
DRM_MODE(..., 27000/2, 1440/2, 1478/2, ...

<snip>
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index 2422413..f8cdf7f 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -918,6 +918,19 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
>  			intel_hdmi->color_range = 0;
>  	}
>  
> +	/* Adjust pipe timings for pixel doubled modes */
> +	if ((adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)) {
> +		adjusted_mode->hsync_start /= 2;
> +		adjusted_mode->hsync_end /= 2;
> +		adjusted_mode->htotal /= 2;
> +
> +		drm_mode_set_crtcinfo(adjusted_mode, 0);
> +
> +		/* Set 2x pixel double on pipe */
> +		pipe_config->pixel_multiplier = 2;
> +		pipe_config->port_clock = adjusted_mode->crtc_clock;
> +	}

If you halve the timings already in drm_edid.c all of this would be
reduced to just:

if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)
	pipe_config->pixel_multiplier = 2;


> +
>  	if (intel_hdmi->color_range)
>  		pipe_config->limited_color_range = true;
>  
> -- 
> 1.7.9.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC



More information about the Intel-gfx mailing list