[Intel-gfx] [PATCH 3/4] drm/i915: Make sure hardware uses the correct swing margin/deemph bits on chv

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

The register can house two different swing marging/deemph settings at
once. However only one gets used based on some other bits. Make sure we
set those bits correctly to make the hardware use the settings we
provided.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h   | 19 +++++++++++++++++++
 drivers/gpu/drm/i915/intel_dp.c   | 14 ++++++++++++++
 drivers/gpu/drm/i915/intel_hdmi.c | 14 ++++++++++++++
 3 files changed, 47 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 2df946d..b8e8d33 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -824,12 +824,31 @@ enum punit_power_well {
 
 #define _VLV_PCS_DW9_CH0		0x8224
 #define _VLV_PCS_DW9_CH1		0x8424
+#define   DPIO_PCS_TX2MARGIN_MASK	(0x7<<13)
+#define   DPIO_PCS_TX2MARGIN_000	(0<<13)
+#define   DPIO_PCS_TX2MARGIN_101	(1<<13)
+#define   DPIO_PCS_TX1MARGIN_MASK	(0x7<<10)
+#define   DPIO_PCS_TX1MARGIN_000	(0<<10)
+#define   DPIO_PCS_TX1MARGIN_101	(1<<10)
 #define	VLV_PCS_DW9(ch) _PORT(ch, _VLV_PCS_DW9_CH0, _VLV_PCS_DW9_CH1)
 
+#define _VLV_PCS01_DW9_CH0		0x224
+#define _VLV_PCS23_DW9_CH0		0x424
+#define _VLV_PCS01_DW9_CH1		0x2624
+#define _VLV_PCS23_DW9_CH1		0x2824
+#define VLV_PCS01_DW9(ch) _PORT(ch, _VLV_PCS01_DW9_CH0, _VLV_PCS01_DW9_CH1)
+#define VLV_PCS23_DW9(ch) _PORT(ch, _VLV_PCS23_DW9_CH0, _VLV_PCS23_DW9_CH1)
+
 #define _CHV_PCS_DW10_CH0		0x8228
 #define _CHV_PCS_DW10_CH1		0x8428
 #define   DPIO_PCS_SWING_CALC_TX0_TX2	(1<<30)
 #define   DPIO_PCS_SWING_CALC_TX1_TX3	(1<<31)
+#define   DPIO_PCS_TX2DEEMP_MASK	(0xf<<24)
+#define   DPIO_PCS_TX2DEEMP_9P5		(0<<24)
+#define   DPIO_PCS_TX2DEEMP_6P0		(2<<24)
+#define   DPIO_PCS_TX1DEEMP_MASK	(0xf<<16)
+#define   DPIO_PCS_TX1DEEMP_9P5		(0<<16)
+#define   DPIO_PCS_TX1DEEMP_6P0		(2<<16)
 #define CHV_PCS_DW10(ch) _PORT(ch, _CHV_PCS_DW10_CH0, _CHV_PCS_DW10_CH1)
 
 #define _VLV_PCS01_DW10_CH0		0x0228
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index e5ada4f..f8e4578 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2632,12 +2632,26 @@ static uint32_t intel_chv_signal_levels(struct intel_dp *intel_dp)
 	/* Clear calc init */
 	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
 	val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
+	val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
+	val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
 	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
 
 	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
 	val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
+	val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
+	val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
 	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
 
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
+	val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
+	val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
+
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
+	val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
+	val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
+
 	/* Program swing deemph */
 	for (i = 0; i < 4; i++) {
 		val = vlv_dpio_read(dev_priv, pipe, CHV_TX_DW4(ch, i));
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 9169786..f3bf0c7 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -1414,12 +1414,26 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
 	/* Clear calc init */
 	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));
 	val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
+	val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
+	val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
 	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW10(ch), val);
 
 	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW10(ch));
 	val &= ~(DPIO_PCS_SWING_CALC_TX0_TX2 | DPIO_PCS_SWING_CALC_TX1_TX3);
+	val &= ~(DPIO_PCS_TX1DEEMP_MASK | DPIO_PCS_TX2DEEMP_MASK);
+	val |= DPIO_PCS_TX1DEEMP_9P5 | DPIO_PCS_TX2DEEMP_9P5;
 	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW10(ch), val);
 
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW9(ch));
+	val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
+	val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW9(ch), val);
+
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW9(ch));
+	val &= ~(DPIO_PCS_TX1MARGIN_MASK | DPIO_PCS_TX2MARGIN_MASK);
+	val |= DPIO_PCS_TX1MARGIN_000 | DPIO_PCS_TX2MARGIN_000;
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW9(ch), val);
+
 	/* FIXME: Program the support xxx V-dB */
 	/* Use 800mV-0dB */
 	for (i = 0; i < 4; i++) {
-- 
1.8.5.5