[Intel-gfx] [PATCH 13/14] drm/i915: Enable DP port earlier
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Mon Aug 18 21:16:08 CEST 2014
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Bspec says we should enable the DP port before enabling panel power,
and that the port must be enabled with training pattern 1. Do so.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_dp.c | 172 +++++++++++++++++++++++-----------------
1 file changed, 100 insertions(+), 72 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 28bc652..12925be 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2264,6 +2264,104 @@ static void chv_post_disable_dp(struct intel_encoder *encoder)
mutex_unlock(&dev_priv->dpio_lock);
}
+static void
+_intel_dp_set_link_train(struct intel_dp *intel_dp,
+ uint32_t *DP,
+ uint8_t dp_train_pat)
+{
+ struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
+ struct drm_device *dev = intel_dig_port->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ enum port port = intel_dig_port->port;
+
+ if (HAS_DDI(dev)) {
+ uint32_t temp = I915_READ(DP_TP_CTL(port));
+
+ if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE)
+ temp |= DP_TP_CTL_SCRAMBLE_DISABLE;
+ else
+ temp &= ~DP_TP_CTL_SCRAMBLE_DISABLE;
+
+ temp &= ~DP_TP_CTL_LINK_TRAIN_MASK;
+ switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
+ case DP_TRAINING_PATTERN_DISABLE:
+ temp |= DP_TP_CTL_LINK_TRAIN_NORMAL;
+
+ break;
+ case DP_TRAINING_PATTERN_1:
+ temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
+ break;
+ case DP_TRAINING_PATTERN_2:
+ temp |= DP_TP_CTL_LINK_TRAIN_PAT2;
+ break;
+ case DP_TRAINING_PATTERN_3:
+ temp |= DP_TP_CTL_LINK_TRAIN_PAT3;
+ break;
+ }
+ I915_WRITE(DP_TP_CTL(port), temp);
+
+ } else if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) {
+ *DP &= ~DP_LINK_TRAIN_MASK_CPT;
+
+ switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
+ case DP_TRAINING_PATTERN_DISABLE:
+ *DP |= DP_LINK_TRAIN_OFF_CPT;
+ break;
+ case DP_TRAINING_PATTERN_1:
+ *DP |= DP_LINK_TRAIN_PAT_1_CPT;
+ break;
+ case DP_TRAINING_PATTERN_2:
+ *DP |= DP_LINK_TRAIN_PAT_2_CPT;
+ break;
+ case DP_TRAINING_PATTERN_3:
+ DRM_ERROR("DP training pattern 3 not supported\n");
+ *DP |= DP_LINK_TRAIN_PAT_2_CPT;
+ break;
+ }
+
+ } else {
+ if (IS_CHERRYVIEW(dev))
+ *DP &= ~DP_LINK_TRAIN_MASK_CHV;
+ else
+ *DP &= ~DP_LINK_TRAIN_MASK;
+
+ switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
+ case DP_TRAINING_PATTERN_DISABLE:
+ *DP |= DP_LINK_TRAIN_OFF;
+ break;
+ case DP_TRAINING_PATTERN_1:
+ *DP |= DP_LINK_TRAIN_PAT_1;
+ break;
+ case DP_TRAINING_PATTERN_2:
+ *DP |= DP_LINK_TRAIN_PAT_2;
+ break;
+ case DP_TRAINING_PATTERN_3:
+ if (IS_CHERRYVIEW(dev)) {
+ *DP |= DP_LINK_TRAIN_PAT_3_CHV;
+ } else {
+ DRM_ERROR("DP training pattern 3 not supported\n");
+ *DP |= DP_LINK_TRAIN_PAT_2;
+ }
+ break;
+ }
+ }
+}
+
+static void intel_dp_enable_port(struct intel_dp *intel_dp)
+{
+ struct drm_device *dev = intel_dp_to_dev(intel_dp);
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ intel_dp->DP |= DP_PORT_EN;
+
+ /* enable with pattern 1 (as per spec) */
+ _intel_dp_set_link_train(intel_dp, &intel_dp->DP,
+ DP_TRAINING_PATTERN_1);
+
+ I915_WRITE(intel_dp->output_reg, intel_dp->DP);
+ POSTING_READ(intel_dp->output_reg);
+}
+
static void intel_enable_dp(struct intel_encoder *encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
@@ -2274,6 +2372,7 @@ static void intel_enable_dp(struct intel_encoder *encoder)
if (WARN_ON(dp_reg & DP_PORT_EN))
return;
+ intel_dp_enable_port(intel_dp);
intel_edp_panel_vdd_on(intel_dp);
intel_edp_panel_on(intel_dp);
intel_edp_panel_vdd_off(intel_dp, true);
@@ -3174,81 +3273,10 @@ intel_dp_set_link_train(struct intel_dp *intel_dp,
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
struct drm_device *dev = intel_dig_port->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- enum port port = intel_dig_port->port;
uint8_t buf[sizeof(intel_dp->train_set) + 1];
int ret, len;
- if (HAS_DDI(dev)) {
- uint32_t temp = I915_READ(DP_TP_CTL(port));
-
- if (dp_train_pat & DP_LINK_SCRAMBLING_DISABLE)
- temp |= DP_TP_CTL_SCRAMBLE_DISABLE;
- else
- temp &= ~DP_TP_CTL_SCRAMBLE_DISABLE;
-
- temp &= ~DP_TP_CTL_LINK_TRAIN_MASK;
- switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
- case DP_TRAINING_PATTERN_DISABLE:
- temp |= DP_TP_CTL_LINK_TRAIN_NORMAL;
-
- break;
- case DP_TRAINING_PATTERN_1:
- temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
- break;
- case DP_TRAINING_PATTERN_2:
- temp |= DP_TP_CTL_LINK_TRAIN_PAT2;
- break;
- case DP_TRAINING_PATTERN_3:
- temp |= DP_TP_CTL_LINK_TRAIN_PAT3;
- break;
- }
- I915_WRITE(DP_TP_CTL(port), temp);
-
- } else if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || port != PORT_A)) {
- *DP &= ~DP_LINK_TRAIN_MASK_CPT;
-
- switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
- case DP_TRAINING_PATTERN_DISABLE:
- *DP |= DP_LINK_TRAIN_OFF_CPT;
- break;
- case DP_TRAINING_PATTERN_1:
- *DP |= DP_LINK_TRAIN_PAT_1_CPT;
- break;
- case DP_TRAINING_PATTERN_2:
- *DP |= DP_LINK_TRAIN_PAT_2_CPT;
- break;
- case DP_TRAINING_PATTERN_3:
- DRM_ERROR("DP training pattern 3 not supported\n");
- *DP |= DP_LINK_TRAIN_PAT_2_CPT;
- break;
- }
-
- } else {
- if (IS_CHERRYVIEW(dev))
- *DP &= ~DP_LINK_TRAIN_MASK_CHV;
- else
- *DP &= ~DP_LINK_TRAIN_MASK;
-
- switch (dp_train_pat & DP_TRAINING_PATTERN_MASK) {
- case DP_TRAINING_PATTERN_DISABLE:
- *DP |= DP_LINK_TRAIN_OFF;
- break;
- case DP_TRAINING_PATTERN_1:
- *DP |= DP_LINK_TRAIN_PAT_1;
- break;
- case DP_TRAINING_PATTERN_2:
- *DP |= DP_LINK_TRAIN_PAT_2;
- break;
- case DP_TRAINING_PATTERN_3:
- if (IS_CHERRYVIEW(dev)) {
- *DP |= DP_LINK_TRAIN_PAT_3_CHV;
- } else {
- DRM_ERROR("DP training pattern 3 not supported\n");
- *DP |= DP_LINK_TRAIN_PAT_2;
- }
- break;
- }
- }
+ _intel_dp_set_link_train(intel_dp, DP, dp_train_pat);
I915_WRITE(intel_dp->output_reg, *DP);
POSTING_READ(intel_dp->output_reg);
--
1.8.5.5
More information about the Intel-gfx
mailing list