[Intel-gfx] [PATCH] drm/i915/chv: Enable HDMI Clock recovery for Pipe C
Imre Deak
imre.deak at intel.com
Fri Dec 5 05:23:59 PST 2014
On Fri, 2014-12-05 at 13:57 +0200, Jani Nikula wrote:
> On Fri, 05 Dec 2014, Imre Deak <imre.deak at intel.com> wrote:
> > On Fri, 2014-12-05 at 10:37 +0200, Jani Nikula wrote:
> >> On Fri, 05 Dec 2014, Clint Taylor <clinton.a.taylor at intel.com> wrote:
> >> > On 12/04/2014 11:08 AM, Clint Taylor wrote:
> >> >> On 12/04/2014 12:41 AM, Jani Nikula wrote:
> >> >>> On Wed, 03 Dec 2014, Clint Taylor <clinton.a.taylor at intel.com> wrote:
> >> >>>> On 12/03/2014 01:01 PM, Ville Syrjälä wrote:
> >> >>>>> On Wed, Dec 03, 2014 at 10:10:30AM -0800, clinton.a.taylor at intel.com
> >> >>>>> wrote:
> >> >>>>>> From: Clint Taylor <clinton.a.taylor at intel.com>
> >> >>>>>>
> >> >>>>>> Added PIPE C register support for CHV audio programming.
> >> >>>>>
> >> >>>>> nak. The offset between the pipes looks constant so it should work
> >> >>>>> just fine with _PIPE().
> >> >>>>
> >> >>>> Correct. Now I just need to figure out why AUD_CONFIG_C is cleared after
> >> >>>> ChromeOS boot.
> >> >>>
> >> >>> "after boot" is a long time! ;)
> >> >>>
> >> >>> Do your logs show that ilk_audio_codec_disable (see intel_audio.c) gets
> >> >>> called? With drm.debug=14 you should see "Disable audio codec on port
> >> >>> %c, pipe %c\n".
> >> >>>
> >> >>> BR,
> >> >>> Jani.
> >> >>>
> >> >>
> >> >> I've actually instrumented the driver with more logging and at 22.43 in
> >> >> the dmesg log the last call to audio_codec_enable() is called and is
> >> >> setting the Pixel_Clock bits of AUD_CONFIG_C to 0x9 which is correct for
> >> >> 1080p60. Sometime after 22.436 and before the ChromeOS login screen
> >> >> appears the register is being cleared to 0x0 without knowledge/action of
> >> >> the i915 driver. Mode change and power state change seem to restore the
> >> >> programming correctly.
> >> >>
> >> >> Most likely candidate right now is an ordering issue with snd_hda
> >> >> during boot.
> >> >>
> >> >
> >> > Ok, removing snd_hda drivers from the boot process did not change the
> >> > result. Any ideas about what could reset the HD_AUDIO registers to their
> >> > default?
> >>
> >> Maybe it needs some power domain/well we fail to get? Similar to what
> >> DDI based platforms do before and after calls to
> >> intel_audio_codec_enable and intel_audio_codec_disable in intel_ddi.c.
> >>
> >> Not really my area, maybe Imre and Ville know better?
> >
> > The audio power domain->power well mapping is mapped correctly in the
> > i915 driver (HDA belongs to the display aka pipe-A power well there).
> > But AFAICS the intel_hda driver doesn't ask for this power domain on
> > VLV/CHV, AZX_DCAPS_I915_POWERWELL is not included in the relevant hda
> > device capability flags. CC'ing Takashi for this.
>
> Imre, i915_request_power_well() only works for hsw/bdw.
Hm, right I should have checked that first. And it could be also the
reason why AZX_DCAPS_I915_POWERWELL was left out for everything but
HSW/BDW. I will send a patch to fix that in i915.
Thanks,
Imre
>
> BR,
> Jani.
>
> >
> > Still, I'm not sure why the register gets zeroed, if there is no power
> > well off->on transition. You could first check if this is really true,
> > via the debug print intel_display_power_get() and
> > intel_display_power_put() emits.
> >
> > Another idea would be to trace writes to this register through
> > I915_WRITE.
> >
> > --Imre
> >
> >>
> >>
> >> BR,
> >> Jani.
> >>
> >>
> >>
> >> >
> >> > -clint
> >> >
> >> >
> >> >> [ 8.607022] [drm:intel_audio_codec_enable] ELD on
> >> >> [CONNECTOR:37:HDMI-A-3], [ENCODER:36:TMDS-36]
> >> >> [ 8.607027] [drm:ilk_audio_codec_enable] Enable audio codec on port
> >> >> D, pipe C, 8 bytes ELD
> >> >> [ 8.607044] *** CAT enable aud_config reg 0x001E2200 = 0x00090000
> >> >> [ 14.741047] [drm:ilk_audio_codec_disable] Disable audio codec on port
> >> >> D, pipe C
> >> >> [ 14.741055] *** CAT disable aud_config reg 0x001E2200 = 0x10000000
> >> >> [ 15.773618] [drm:intel_audio_codec_enable] ELD on
> >> >> [CONNECTOR:37:HDMI-A-3], [ENCODER:36:TMDS-36]
> >> >> [ 15.773624] [drm:ilk_audio_codec_enable] Enable audio codec on port
> >> >> D, pipe C, 8 bytes ELD
> >> >> [ 15.779315] *** CAT enable aud_config reg 0x001E2200 = 0x00090000
> >> >> [ 19.936767] [drm:ilk_audio_codec_disable] Disable audio codec on port
> >> >> D, pipe C
> >> >> [ 19.936778] *** CAT disable aud_config reg 0x001E2200 = 0x10000000
> >> >> [ 20.292920] [drm:intel_audio_codec_enable] ELD on
> >> >> [CONNECTOR:37:HDMI-A-3], [ENCODER:36:TMDS-36]
> >> >> [ 20.292928] [drm:ilk_audio_codec_enable] Enable audio codec on port
> >> >> D, pipe C, 8 bytes ELD
> >> >> [ 20.298615] *** CAT enable aud_config reg 0x001E2200 = 0x00090000
> >> >> [ 20.389110] [drm:ilk_audio_codec_disable] Disable audio codec on port
> >> >> D, pipe C
> >> >> [ 20.389121] *** CAT disable aud_config reg 0x001E2200 = 0x10000000
> >> >> [ 22.430931] [drm:intel_audio_codec_enable] ELD on
> >> >> [CONNECTOR:37:HDMI-A-3], [ENCODER:36:TMDS-36]
> >> >> [ 22.430940] [drm:ilk_audio_codec_enable] Enable audio codec on port
> >> >> D, pipe C, 8 bytes ELD
> >> >> [ 22.436627] *** CAT enable aud_config reg 0x001E2200 = 0x00090000
> >> >>
> >> >>>
> >> >>>
> >> >>>
> >> >>>>
> >> >>>> -Clint
> >> >>>>
> >> >>>>>
> >> >>>>>>
> >> >>>>>> Signed-off-by: Clint Taylor <clinton.a.taylor at intel.com>
> >> >>>>>> ---
> >> >>>>>> drivers/gpu/drm/i915/i915_reg.h | 18 ++++++++++++------
> >> >>>>>> 1 file changed, 12 insertions(+), 6 deletions(-)
> >> >>>>>>
> >> >>>>>> diff --git a/drivers/gpu/drm/i915/i915_reg.h
> >> >>>>>> b/drivers/gpu/drm/i915/i915_reg.h
> >> >>>>>> index dc03fac..3d5813a 100644
> >> >>>>>> --- a/drivers/gpu/drm/i915/i915_reg.h
> >> >>>>>> +++ b/drivers/gpu/drm/i915/i915_reg.h
> >> >>>>>> @@ -6189,14 +6189,18 @@ enum punit_power_well {
> >> >>>>>>
> >> >>>>>> #define _VLV_HDMIW_HDMIEDID_A (VLV_DISPLAY_BASE + 0x62050)
> >> >>>>>> #define _VLV_HDMIW_HDMIEDID_B (VLV_DISPLAY_BASE + 0x62150)
> >> >>>>>> -#define VLV_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \
> >> >>>>>> +#define _CHV_HDMIW_HDMIEDID_C (VLV_DISPLAY_BASE + 0x62250)
> >> >>>>>> +#define VLV_HDMIW_HDMIEDID(pipe) _PIPE3(pipe, \
> >> >>>>>> _VLV_HDMIW_HDMIEDID_A, \
> >> >>>>>> - _VLV_HDMIW_HDMIEDID_B)
> >> >>>>>> + _VLV_HDMIW_HDMIEDID_B, \
> >> >>>>>> + _CHV_HDMIW_HDMIEDID_C)
> >> >>>>>> #define _VLV_AUD_CNTL_ST_A (VLV_DISPLAY_BASE + 0x620B4)
> >> >>>>>> #define _VLV_AUD_CNTL_ST_B (VLV_DISPLAY_BASE + 0x621B4)
> >> >>>>>> -#define VLV_AUD_CNTL_ST(pipe) _PIPE(pipe, \
> >> >>>>>> +#define _CHV_AUD_CNTL_ST_C (VLV_DISPLAY_BASE + 0x622B4)
> >> >>>>>> +#define VLV_AUD_CNTL_ST(pipe) _PIPE3(pipe, \
> >> >>>>>> _VLV_AUD_CNTL_ST_A, \
> >> >>>>>> - _VLV_AUD_CNTL_ST_B)
> >> >>>>>> + _VLV_AUD_CNTL_ST_B, \
> >> >>>>>> + _CHV_AUD_CNTL_ST_C)
> >> >>>>>> #define VLV_AUD_CNTL_ST2 (VLV_DISPLAY_BASE + 0x620C0)
> >> >>>>>>
> >> >>>>>> /* These are the 4 32-bit write offset registers for each stream
> >> >>>>>> @@ -6217,9 +6221,11 @@ enum punit_power_well {
> >> >>>>>> _CPT_AUD_CONFIG_B)
> >> >>>>>> #define _VLV_AUD_CONFIG_A (VLV_DISPLAY_BASE + 0x62000)
> >> >>>>>> #define _VLV_AUD_CONFIG_B (VLV_DISPLAY_BASE + 0x62100)
> >> >>>>>> -#define VLV_AUD_CFG(pipe) _PIPE(pipe, \
> >> >>>>>> +#define _CHV_AUD_CONFIG_C (VLV_DISPLAY_BASE + 0x62200)
> >> >>>>>> +#define VLV_AUD_CFG(pipe) _PIPE3(pipe, \
> >> >>>>>> _VLV_AUD_CONFIG_A, \
> >> >>>>>> - _VLV_AUD_CONFIG_B)
> >> >>>>>> + _VLV_AUD_CONFIG_B, \
> >> >>>>>> + _CHV_AUD_CONFIG_C)
> >> >>>>>>
> >> >>>>>> #define AUD_CONFIG_N_VALUE_INDEX (1 << 29)
> >> >>>>>> #define AUD_CONFIG_N_PROG_ENABLE (1 << 28)
> >> >>>>>> --
> >> >>>>>> 1.7.9.5
> >> >>>>>>
> >> >>>>>> _______________________________________________
> >> >>>>>> Intel-gfx mailing list
> >> >>>>>> Intel-gfx at lists.freedesktop.org
> >> >>>>>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >> >>>>>
> >> >>>>
> >> >>>> _______________________________________________
> >> >>>> Intel-gfx mailing list
> >> >>>> Intel-gfx at lists.freedesktop.org
> >> >>>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >> >>>
> >> >>
> >> >> _______________________________________________
> >> >> Intel-gfx mailing list
> >> >> Intel-gfx at lists.freedesktop.org
> >> >> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
> >> >
> >>
> >
> >
>
More information about the Intel-gfx
mailing list