[Intel-gfx] [PATCH 6/7] drm/i915: Change HSW WIZ hashing mode to 16x4

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

BSpec recommends using 8x4 hashing mode when MSAA is used. But in
practice 16x4 seems to have a slight edge in performance (on IVB and
HSW at least). So just use 16x4.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index c51b64a..ba5fee4 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4856,6 +4856,13 @@ static void haswell_init_clock_gating(struct drm_device *dev)
 	I915_WRITE(CACHE_MODE_1,
 		   _MASKED_BIT_ENABLE(PIXEL_SUBSPAN_COLLECT_OPT_DISABLE));
 
+	/*
+	 * BSpec recommends 8x4 when MSAA is used,
+	 * however in practice 16x4 seems fastest.
+	 */
+	I915_WRITE(GEN7_GT_MODE,
+		   GEN6_WIZ_HASHING_MASK | GEN6_WIZ_HASHING_16x4);
+
 	/* WaSwitchSolVfFArbitrationPriority:hsw */
 	I915_WRITE(GAM_ECOCHK, I915_READ(GAM_ECOCHK) | HSW_ECOCHK_ARB_PRIO_SOL);
 
-- 
1.8.3.2