[Intel-gfx] [PATCH 5/6] drm/i915: allow re-use BIOS connector config for initial fbdev config

[Jesse Barnes]

The BIOS or boot loader will generally create an initial display
configuration for us that includes some set of active pipes and
displays.  This routine tries to figure out which pipes and connectors
are active and stuffs them into the crtcs and modes array given to us by
the drm_fb_helper code.

Signed-off-by: Jesse Barnes <jbarnes at virtuousgeek.org>
---
 drivers/gpu/drm/i915/intel_fbdev.c |   91 ++++++++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)

diff --git a/drivers/gpu/drm/i915/intel_fbdev.c b/drivers/gpu/drm/i915/intel_fbdev.c
index fb07ba6..8ce3405 100644
--- a/drivers/gpu/drm/i915/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/intel_fbdev.c
@@ -246,6 +246,97 @@ static void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
 	*blue = intel_crtc->lut_b[regno] << 8;
 }
 
+static struct drm_fb_helper_crtc *
+intel_fb_helper_crtc(struct drm_fb_helper *fb_helper, struct drm_crtc *crtc)
+{
+	int i;
+
+	for (i = 0; i < fb_helper->crtc_count; i++)
+		if (fb_helper->crtc_info[i].mode_set.crtc == crtc)
+			return &fb_helper->crtc_info[i];
+
+	return NULL;
+}
+
+/*
+ * Try to read the BIOS display configuration and use it for the initial
+ * fb configuration.
+ *
+ * The BIOS or boot loader will generally create an initial display
+ * configuration for us that includes some set of active pipes and displays.
+ * This routine tries to figure out which pipes and connectors are active
+ * and stuffs them into the crtcs and modes array given to us by the
+ * drm_fb_helper code.
+ *
+ * The overall sequence is:
+ *   intel_fbdev_init - from driver load
+ *     intel_fbdev_init_bios - initialize the intel_fbdev using BIOS data
+ *     drm_fb_helper_init - build fb helper structs
+ *     drm_fb_helper_single_add_all_connectors - more fb helper structs
+ *   intel_fbdev_initial_config - apply the config
+ *     drm_fb_helper_initial_config - call ->probe then register_framebuffer()
+ *         drm_setup_crtcs - build crtc config for fbdev
+ *           intel_fb_initial_config - find active connectors etc
+ *         drm_fb_helper_single_fb_probe - set up fbdev
+ *           intelfb_create - re-use or alloc fb, build out fbdev structs
+ *
+ * If the BIOS or boot loader leaves the display in VGA mode, there's not
+ * much we can do; switching out of that mode involves allocating a new,
+ * high res buffer, and also recalculating bandwidth requirements for the
+ * new bpp configuration.
+ */
+static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
+				    struct drm_fb_helper_crtc **crtcs,
+				    struct drm_display_mode **modes,
+				    bool *enabled, int width, int height)
+{
+	int i;
+
+	for (i = 0; i < fb_helper->connector_count; i++) {
+		struct drm_connector *connector;
+		struct drm_encoder *encoder;
+
+		connector = fb_helper->connector_info[i]->connector;
+		if (!enabled[i]) {
+			DRM_DEBUG_KMS("connector %d not enabled, skipping\n",
+				      connector->base.id);
+			continue;
+		}
+
+		encoder = connector->encoder;
+		if (!encoder || !encoder->crtc) {
+			DRM_DEBUG_KMS("connector %d has no encoder or crtc, skipping\n",
+				      connector->base.id);
+			enabled[i] = false;
+			continue;
+		}
+
+		if (WARN_ON(!encoder->crtc->enabled)) {
+			DRM_DEBUG_KMS("connector %s on crtc %d has inconsistent state, aborting\n",
+				      drm_get_connector_name(connector),
+				      encoder->crtc->base.id);
+			return false;
+		}
+
+		if (!to_intel_crtc(encoder->crtc)->active) {
+			DRM_DEBUG_KMS("connector %s on inactive crtc %d, borting\n",
+				      drm_get_connector_name(connector),
+				      encoder->crtc->base.id);
+			return false;
+		}
+
+		modes[i] = &encoder->crtc->mode;
+		crtcs[i] = intel_fb_helper_crtc(fb_helper, encoder->crtc);
+
+		DRM_DEBUG_KMS("connector %s on crtc %d: %s\n",
+			      drm_get_connector_name(connector),
+			      encoder->crtc->base.id,
+			      modes[i]->name);
+	}
+
+	return true;
+}
+
 static struct drm_fb_helper_funcs intel_fb_helper_funcs = {
 	.gamma_set = intel_crtc_fb_gamma_set,
 	.gamma_get = intel_crtc_fb_gamma_get,
-- 
1.7.9.5