[Intel-gfx] [PATCH] drm/i915: Some polish for the new pipestat_irq_handler
Daniel Vetter
daniel.vetter at ffwll.ch
Wed Feb 12 17:55:36 CET 2014
Just a bit of polish which I hope will help me with massaging some
internal patches to use Imre's reworked pipestat handling:
- Don't check for underrun reporting or enable pipestat interrupts
twice.
- Frob the comments a bit.
- Do the iir PIPE_EVENT to pipe mapping explicitly with a switch. We
only have one place which does this, so better to make it explicit.
v2: Ville noticed that I've broken the logic a bit with trying to
avoid checking whether we're interested in a given pipe twice. push
the PIPESTAT read down after we've computed the mask of interesting
bits first to avoid that duplication properly.
Cc: Imre Deak <imre.deak at intel.com>
Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/i915_irq.c | 36 +++++++++++++++++++++++++-----------
drivers/gpu/drm/i915/i915_reg.h | 4 ----
2 files changed, 25 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 386a640b7c92..a45ed67407bd 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1559,25 +1559,39 @@ static void valleyview_pipestat_irq_handler(struct drm_device *dev, u32 iir)
spin_lock(&dev_priv->irq_lock);
for_each_pipe(pipe) {
int reg;
- u32 mask;
-
- if (!dev_priv->pipestat_irq_mask[pipe] &&
- !__cpu_fifo_underrun_reporting_enabled(dev, pipe))
- continue;
-
- reg = PIPESTAT(pipe);
- pipe_stats[pipe] = I915_READ(reg);
+ u32 mask, iir_bit;
/*
- * Clear the PIPE*STAT regs before the IIR
+ * PIPESTAT bits get signalled even when the interrupt is
+ * disabled with the mask bits, and some of the status bits do
+ * not generate interrupts at all (like the underrun bit). Hence
+ * we need to be careful that we only handle what we want to
+ * handle.
*/
mask = PIPESTAT_INT_ENABLE_MASK;
if (__cpu_fifo_underrun_reporting_enabled(dev, pipe))
mask |= PIPE_FIFO_UNDERRUN_STATUS;
- if (iir & I915_DISPLAY_PIPE_EVENT_INTERRUPT(pipe))
+
+ switch (pipe) {
+ case PIPE_A:
+ iir_bit = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
+ break;
+ case PIPE_B:
+ iir_bit = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
+ break;
+ }
+ if (iir & iir_bit)
mask |= dev_priv->pipestat_irq_mask[pipe];
- pipe_stats[pipe] &= mask;
+ if (!mask)
+ continue;
+
+ reg = PIPESTAT(pipe);
+ pipe_stats[pipe] = I915_READ(reg) & mask;
+
+ /*
+ * Clear the PIPE*STAT regs before the IIR
+ */
if (pipe_stats[pipe] & (PIPE_FIFO_UNDERRUN_STATUS |
PIPESTAT_INT_STATUS_MASK))
I915_WRITE(reg, pipe_stats[pipe]);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 645221270c34..8344541bbb93 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -997,10 +997,6 @@
#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6)
#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5)
#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4)
-#define I915_DISPLAY_PIPE_EVENT_INTERRUPT(pipe) \
- ((pipe) == PIPE_A ? I915_DISPLAY_PIPE_A_EVENT_INTERRUPT : \
- I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
-
#define I915_DEBUG_INTERRUPT (1<<2)
#define I915_USER_INTERRUPT (1<<1)
#define I915_ASLE_INTERRUPT (1<<0)
--
1.8.1.4
More information about the Intel-gfx
mailing list