[Intel-gfx] [PATCH 19/19] drm/i915: power domains: add vlv power wells
Ville Syrjälä
ville.syrjala at linux.intel.com
Wed Feb 19 13:29:44 CET 2014
On Tue, Feb 18, 2014 at 12:02:20AM +0200, Imre Deak wrote:
> Based on an early draft from Jesse.
>
> Add support for powering on/off the dynamic power wells on VLV by
> registering its display and dpio dynamic power wells with the power
> domain framework.
>
> For now power on all PHY TX lanes regardless of the actual lane
> configuration. Later this can be optimized when the PHY side setup
> enables only the required lanes. Atm, it enables all lanes in all
> cases.
>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
> ---
> drivers/gpu/drm/i915/i915_dma.c | 1 -
> drivers/gpu/drm/i915/i915_drv.h | 2 +-
> drivers/gpu/drm/i915/intel_display.c | 1 +
> drivers/gpu/drm/i915/intel_pm.c | 228 +++++++++++++++++++++++++++++++++++
> 4 files changed, 230 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
> index dca4dc3..f8f7a59 100644
> --- a/drivers/gpu/drm/i915/i915_dma.c
> +++ b/drivers/gpu/drm/i915/i915_dma.c
> @@ -1668,7 +1668,6 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
> goto out_mtrrfree;
> }
>
> - dev_priv->display_irqs_enabled = true;
> intel_irq_init(dev);
> intel_uncore_sanitize(dev);
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 227c349..804334e 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -1053,7 +1053,7 @@ struct i915_power_well {
> /* power well enable/disable usage count */
> int count;
> unsigned long domains;
> - void *data;
> + unsigned long data;
> const struct i915_power_well_ops *ops;
> };
>
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index ea00878..d6661c4 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4224,6 +4224,7 @@ static void valleyview_modeset_global_resources(struct drm_device *dev)
>
> if (req_cdclk != cur_cdclk)
> valleyview_set_cdclk(dev, req_cdclk);
> + modeset_update_power_wells(dev);
> }
>
> static void valleyview_crtc_enable(struct drm_crtc *crtc)
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 68f58e5..e4416a7 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -5344,6 +5344,133 @@ static void hsw_power_well_disable(struct drm_i915_private *dev_priv,
> hsw_enable_package_c8(dev_priv);
> }
>
> +static void vlv_set_power_well(struct drm_i915_private *dev_priv,
> + struct i915_power_well *power_well, bool enable)
> +{
> + enum punit_power_well power_well_id = power_well->data;
> + u32 mask;
> + u32 state;
> + u32 ctrl;
> +
> + mask = PUNIT_PWRGT_MASK(power_well_id);
> + state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
> + PUNIT_PWRGT_PWR_GATE(power_well_id);
> +
> + mutex_lock(&dev_priv->rps.hw_lock);
> +
> +#define COND \
> + ((vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_STATUS) & mask) == state)
> +
> + if (COND)
> + goto out;
> +
> + ctrl = vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL);
> + ctrl &= ~mask;
> + ctrl |= state;
> + vlv_punit_write(dev_priv, PUNIT_REG_PWRGT_CTRL, ctrl);
> +
> + if (wait_for(COND, 100))
> + DRM_ERROR("timout setting power well state %08x (%08x)\n",
> + state,
> + vlv_punit_read(dev_priv, PUNIT_REG_PWRGT_CTRL));
#undef COND somewhere to avoid suprises further down in the code?
> +
> +out:
> + mutex_unlock(&dev_priv->rps.hw_lock);
> +}
> +
<snip>
--
Ville Syrjälä
Intel OTC
More information about the Intel-gfx
mailing list