[Intel-gfx] [PATCH 2/2] drm/i915: Don't swap planes on 830M
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Tue Jan 7 15:15:37 CET 2014
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Looks like 830M doesn't quite like it when you try to move a plane from
one pipe to another. It seems that the plane's old pipe has to be active
even if the plane is already disabled, otherwise the relevant register
just won't accept new values.
The following commit:
commit 1f1c2e2468f937cefd6bcb645c959c7b5d9821df
Author: Ville Syrjälä <ville.syrjala at linux.intel.com>
Date: Thu Nov 28 17:30:01 2013 +0200
drm/i915: Swap primary planes on gen2 for FBC
caused a regression on 830M. It will attempt to swap the planes when the
driver is loaded, but at that time only pipe A might be active, so plane
A gets disabled, but plane B won't get enabled since pipe B is not
active when we try to move the plane over to pipe A.
There's no reason to swap planes on 830M since it doesn't support
FBC. Change the logic a bit to limit the plane swapping to platforms
which actually support FBC. This should avoid getting a black screen on
830M.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/i915_irq.c | 4 ++--
drivers/gpu/drm/i915/intel_display.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 1d44c79..158cb30 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -3220,7 +3220,7 @@ static irqreturn_t i8xx_irq_handler(int irq, void *arg)
for_each_pipe(pipe) {
int plane = pipe;
- if (IS_MOBILE(dev))
+ if (I915_HAS_FBC(dev))
plane = !plane;
if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS &&
@@ -3421,7 +3421,7 @@ static irqreturn_t i915_irq_handler(int irq, void *arg)
for_each_pipe(pipe) {
int plane = pipe;
- if (IS_MOBILE(dev))
+ if (I915_HAS_FBC(dev))
plane = !plane;
if (pipe_stats[pipe] & PIPE_VBLANK_INTERRUPT_STATUS &&
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 303b3b3..d3d33e9 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10160,7 +10160,7 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
*/
intel_crtc->pipe = pipe;
intel_crtc->plane = pipe;
- if (IS_MOBILE(dev) && INTEL_INFO(dev)->gen < 4) {
+ if (I915_HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) {
DRM_DEBUG_KMS("swapping pipes & planes for FBC\n");
intel_crtc->plane = !pipe;
}
--
1.8.3.2
More information about the Intel-gfx
mailing list