[Intel-gfx] [PATCH v2] drm/i915: vlv: W/a for hotplug/manual VGA detection

[Ville Syrjälä]

On Tue, Dec 17, 2013 at 10:52:24PM +0200, Imre Deak wrote:
> VGA detection requires the reference clock to be on, so make sure this
> is the case.
> 
> This fixes VGA hotplug/manual detection where all pipes are off and so
> we would normally disable all clocks.
> 
> v2:
> - Instead of disabling PSR clock gating, force the reference clock on
>   through the DPLL_A register. (Kin Chan S <kin.s.chan at intel.com>)
> 
> Reported-by: Joonas Lahtinen <joonas.lahtinen at linux.intel.com>
> Signed-off-by: Imre Deak <imre.deak at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_display.c | 14 ++++++++++++--
>  drivers/gpu/drm/i915/intel_pm.c      |  5 +++++
>  2 files changed, 17 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 674fd43..f3a0a7e 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1507,9 +1507,15 @@ static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
>  	/* Make sure the pipe isn't still relying on us */
>  	assert_pipe_disabled(dev_priv, pipe);
>  
> -	/* Leave integrated clock source enabled */
> +	/*
> +	 * Leave integrated clock source enabled for pipe B and the reference
> +	 * clock for pipe A. The latter is needed for VGA hotplug / manual
> +	 * detection.
> +	 */
>  	if (pipe == PIPE_B)
>  		val = DPLL_INTEGRATED_CRI_CLK_VLV;
> +	else
> +		val = DPLL_REFA_CLK_ENABLE_VLV;
>  	I915_WRITE(DPLL(pipe), val);
>  	POSTING_READ(DPLL(pipe));
>  }
> @@ -4984,7 +4990,11 @@ static void vlv_update_pll(struct intel_crtc *crtc)
>  
>  	vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
>  
> -	/* Enable DPIO clock input */
> +	/*
> +	 * Enable DPIO clock input. We should never disable the reference
> +	 * clock for pipe A, since VGA hotplug / manual detection depends
> +	 * on it. Set it here for state tracking.
> +	 */
>  	dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV |
>  		DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV;
>  	/* We should never disable this, set it here for state tracking */
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index fccd7a8..1c1de83 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -4933,6 +4933,11 @@ static void valleyview_init_clock_gating(struct drm_device *dev)
>  
>  	I915_WRITE(DSPCLK_GATE_D, VRHUNIT_CLOCK_GATE_DISABLE);
>  
> +	/* Force the reference clock on for VGA hotplug / manual detection */
> +	val = I915_READ(DPLL(PIPE_A));
> +	val |= DPLL_REFA_CLK_ENABLE_VLV;
> +	I915_WRITE(DPLL(PIPE_A), val);
> +

Maybe put this part into intel_init_dpio()?

I can't really comment on the rest since I have no idea why it works.

>  	/* WaDisableEarlyCull:vlv */
>  	I915_WRITE(_3D_CHICKEN3,
>  		   _MASKED_BIT_ENABLE(_3D_CHICKEN_SF_DISABLE_OBJEND_CULL));
> -- 
> 1.8.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC