[Intel-gfx] [PATCH] drm/i915/vlv: Add drpc debugfs support for valleyview

[Ville Syrjälä]

On Thu, Jan 09, 2014 at 07:28:51PM +0530, deepak.s at intel.com wrote:
> From: Deepak S <deepak.s at intel.com>
> 
> Many of the fields from Gen6 have gone away for vlv. Strip all those
> fields that are not relevent and try to update fields that we care
> about. This patch give information about current RP & RC status and
> individual Wells.
> 
> Signed-off-by: Deepak S <deepak.s at intel.com>
> ---
>  drivers/gpu/drm/i915/i915_debugfs.c | 49 ++++++++++++++++++++++++++++++++++++-
>  drivers/gpu/drm/i915/i915_reg.h     |  3 +++
>  2 files changed, 51 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
> index 430eb3e..46f2a9e 100644
> --- a/drivers/gpu/drm/i915/i915_debugfs.c
> +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> @@ -1172,6 +1172,51 @@ static int ironlake_drpc_info(struct seq_file *m)
>  	return 0;
>  }
>  
> +static int vlv_drpc_info(struct seq_file *m)
> +{
> +
> +	struct drm_info_node *node = (struct drm_info_node *) m->private;
> +	struct drm_device *dev = node->minor->dev;
> +	struct drm_i915_private *dev_priv = dev->dev_private;
> +	u32 rpmodectl1, rcctl1;
> +	unsigned fw_rendercount = 0, fw_mediacount = 0;
> +
> +	rpmodectl1 = I915_READ(GEN6_RP_CONTROL);
> +	rcctl1 = I915_READ(GEN6_RC_CONTROL);
> +
> +	seq_printf(m, "Video Turbo Mode: %s\n",
> +		   yesno(rpmodectl1 & GEN6_RP_MEDIA_TURBO));
> +	seq_printf(m, "Turbo enabled: %s\n",
> +		   yesno(rpmodectl1 & GEN6_RP_ENABLE));
> +	seq_printf(m, "HW control enabled: %s\n",
> +		   yesno(rpmodectl1 & GEN6_RP_ENABLE));
> +	seq_printf(m, "SW control enabled: %s\n",
> +		   yesno((rpmodectl1 & GEN6_RP_MEDIA_MODE_MASK) ==
> +			  GEN6_RP_MEDIA_SW_MODE));
> +	seq_printf(m, "RC6 Enabled: %s\n",
> +		   yesno(rcctl1 & (GEN7_RC_CTL_TO_MODE |
> +					GEN6_RC_CTL_EI_MODE(1))));
> +	seq_printf(m, "Render Well %s & Media Well : %s\n",
> +				(I915_READ(VLV_GTLC_PW_STATUS) &
> +					VLV_RENDER_WELL_STATUS_MASK)
> +					? "Up" : "Down",
> +				(I915_READ(VLV_GTLC_PW_STATUS) &
> +					VLV_MEDIA_WELL_STATUS_MASK)
> +					? "Up" : "Down");

Why not put these on separate lines?

> +
> +	spin_lock_irq(&dev_priv->uncore.lock);
> +	fw_rendercount = dev_priv->uncore.fw_rendercount;
> +	fw_mediacount = dev_priv->uncore.fw_mediacount;
> +	spin_unlock_irq(&dev_priv->uncore.lock);
> +
> +	seq_printf(m, "Forcewake Render Count = %u\n", fw_rendercount);
> +	seq_printf(m, "Forcewake Media Count = %u\n", fw_mediacount);
> +
> +
> +	return 0;
> +}
> +
> +
>  static int gen6_drpc_info(struct seq_file *m)
>  {
>  
> @@ -1277,7 +1322,9 @@ static int i915_drpc_info(struct seq_file *m, void *unused)
>  	struct drm_info_node *node = (struct drm_info_node *) m->private;
>  	struct drm_device *dev = node->minor->dev;
>  
> -	if (IS_GEN6(dev) || IS_GEN7(dev))
> +	if (IS_VALLEYVIEW(dev))
> +		return vlv_drpc_info(m);
> +	else if (IS_GEN6(dev) || IS_GEN7(dev))
>  		return gen6_drpc_info(m);
>  	else
>  		return ironlake_drpc_info(m);
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index a699efd..26aab85 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4829,6 +4829,9 @@
>  #define  ECOBUS					0xa180
>  #define    FORCEWAKE_MT_ENABLE			(1<<5)
>  
> +#define VLV_RENDER_WELL_STATUS_MASK             0x80
> +#define VLV_MEDIA_WELL_STATUS_MASK              0x20

These should be placed below the relevant register define.

> +
>  #define  GTFIFODBG				0x120000
>  #define    GT_FIFO_SBDROPERR			(1<<6)
>  #define    GT_FIFO_BLOBDROPERR			(1<<5)
> -- 
> 1.8.4.2
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC