[Intel-gfx] [PATCH 1/4] drm/i915: Pre-compute pipe enabled state
ville.syrjala at linux.intel.com
ville.syrjala at linux.intel.com
Fri Jan 10 10:28:06 CET 2014
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Add 'new_enabled' to intel_crtc and precompute it alongside new_encoder
and new_crtc. This will allow making decisions about shared resources
that are affected by the set of active pipes, before we've clobbered
anything for real.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/intel_display.c | 78 ++++++++++++++++++++++++++++--------
drivers/gpu/drm/i915/intel_drv.h | 2 +
2 files changed, 64 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bf4c6b5..7020b7b 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8736,6 +8736,7 @@ static bool intel_encoder_crtc_ok(struct drm_encoder *encoder,
*/
static void intel_modeset_update_staged_output_state(struct drm_device *dev)
{
+ struct intel_crtc *crtc;
struct intel_encoder *encoder;
struct intel_connector *connector;
@@ -8750,6 +8751,11 @@ static void intel_modeset_update_staged_output_state(struct drm_device *dev)
encoder->new_crtc =
to_intel_crtc(encoder->base.crtc);
}
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list,
+ base.head) {
+ crtc->new_enabled = crtc->base.enabled;
+ }
}
/**
@@ -8759,6 +8765,7 @@ static void intel_modeset_update_staged_output_state(struct drm_device *dev)
*/
static void intel_modeset_commit_output_state(struct drm_device *dev)
{
+ struct intel_crtc *crtc;
struct intel_encoder *encoder;
struct intel_connector *connector;
@@ -8771,6 +8778,11 @@ static void intel_modeset_commit_output_state(struct drm_device *dev)
base.head) {
encoder->base.crtc = &encoder->new_crtc->base;
}
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list,
+ base.head) {
+ crtc->base.enabled = crtc->new_enabled;
+ }
}
static void
@@ -9097,29 +9109,22 @@ intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes,
*prepare_pipes |= 1 << encoder->new_crtc->pipe;
}
- /* Check for any pipes that will be fully disabled ... */
+ /* Check for pipes that will be enabled/disabled ... */
list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
base.head) {
- bool used = false;
-
- /* Don't try to disable disabled crtcs. */
- if (!intel_crtc->base.enabled)
+ if (intel_crtc->base.enabled == intel_crtc->new_enabled)
continue;
- list_for_each_entry(encoder, &dev->mode_config.encoder_list,
- base.head) {
- if (encoder->new_crtc == intel_crtc)
- used = true;
- }
-
- if (!used)
+ if (!intel_crtc->new_enabled)
*disable_pipes |= 1 << intel_crtc->pipe;
+ else
+ *prepare_pipes |= 1 << intel_crtc->pipe;
}
/* set_mode is also used to update properties on life display pipes. */
intel_crtc = to_intel_crtc(crtc);
- if (crtc->enabled)
+ if (intel_crtc->new_enabled)
*prepare_pipes |= 1 << intel_crtc->pipe;
/*
@@ -9178,10 +9183,10 @@ intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes)
intel_modeset_commit_output_state(dev);
- /* Update computed state. */
+ /* Double check state. */
list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list,
base.head) {
- intel_crtc->base.enabled = intel_crtc_in_use(&intel_crtc->base);
+ WARN_ON(intel_crtc->base.enabled != intel_crtc_in_use(&intel_crtc->base));
}
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
@@ -9723,16 +9728,24 @@ static void intel_set_config_free(struct intel_set_config *config)
kfree(config->save_connector_encoders);
kfree(config->save_encoder_crtcs);
+ kfree(config->save_crtc_enabled);
kfree(config);
}
static int intel_set_config_save_state(struct drm_device *dev,
struct intel_set_config *config)
{
+ struct drm_crtc *crtc;
struct drm_encoder *encoder;
struct drm_connector *connector;
int count;
+ config->save_crtc_enabled =
+ kcalloc(dev->mode_config.num_crtc,
+ sizeof(bool), GFP_KERNEL);
+ if (!config->save_crtc_enabled)
+ return -ENOMEM;
+
config->save_encoder_crtcs =
kcalloc(dev->mode_config.num_encoder,
sizeof(struct drm_crtc *), GFP_KERNEL);
@@ -9750,6 +9763,11 @@ static int intel_set_config_save_state(struct drm_device *dev,
* restored, not the drivers personal bookkeeping.
*/
count = 0;
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ config->save_crtc_enabled[count++] = crtc->enabled;
+ }
+
+ count = 0;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
config->save_encoder_crtcs[count++] = encoder->crtc;
}
@@ -9765,11 +9783,17 @@ static int intel_set_config_save_state(struct drm_device *dev,
static void intel_set_config_restore_state(struct drm_device *dev,
struct intel_set_config *config)
{
+ struct intel_crtc *crtc;
struct intel_encoder *encoder;
struct intel_connector *connector;
int count;
count = 0;
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) {
+ crtc->new_enabled = config->save_crtc_enabled[count++];
+ }
+
+ count = 0;
list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) {
encoder->new_crtc =
to_intel_crtc(config->save_encoder_crtcs[count++]);
@@ -9853,9 +9877,9 @@ intel_modeset_stage_output_state(struct drm_device *dev,
struct drm_mode_set *set,
struct intel_set_config *config)
{
- struct drm_crtc *new_crtc;
struct intel_connector *connector;
struct intel_encoder *encoder;
+ struct intel_crtc *crtc;
int ro;
/* The upper layers ensure that we either disable a crtc or have a list
@@ -9898,6 +9922,8 @@ intel_modeset_stage_output_state(struct drm_device *dev,
/* Update crtc of enabled connectors. */
list_for_each_entry(connector, &dev->mode_config.connector_list,
base.head) {
+ struct drm_crtc *new_crtc;
+
if (!connector->new_encoder)
continue;
@@ -9944,6 +9970,26 @@ next_encoder:
}
/* Now we've also updated encoder->new_crtc for all encoders. */
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list,
+ base.head) {
+ crtc->new_enabled = false;
+
+ list_for_each_entry(encoder,
+ &dev->mode_config.encoder_list,
+ base.head) {
+ if (encoder->new_crtc == crtc) {
+ crtc->new_enabled = true;
+ break;
+ }
+ }
+
+ if (crtc->new_enabled != crtc->base.enabled) {
+ DRM_DEBUG_KMS("crtc %sabled, full mode switch\n",
+ crtc->new_enabled ? "en" : "dis");
+ config->mode_changed = true;
+ }
+ }
+
return 0;
}
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 46aea6c..7f55290 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -359,6 +359,7 @@ struct intel_crtc {
bool cursor_visible;
struct intel_crtc_config config;
+ bool new_enabled;
uint32_t ddi_pll_sel;
@@ -540,6 +541,7 @@ struct intel_unpin_work {
struct intel_set_config {
struct drm_encoder **save_connector_encoders;
struct drm_crtc **save_encoder_crtcs;
+ bool *save_crtc_enabled;
bool fb_changed;
bool mode_changed;
--
1.8.3.2
More information about the Intel-gfx
mailing list