[Intel-gfx] [PATCH 2/3] drm/i915: Make irq_received bool

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

irq_received is used as a boolean in i965_irq_handler(), so make it
bool. This also makes i965_irq_handler() closer to i915_irq_handler().

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/i915_irq.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index fa2b6cf..54a62f0 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -3606,7 +3606,6 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
 	u32 iir, new_iir;
 	u32 pipe_stats[I915_MAX_PIPES];
 	unsigned long irqflags;
-	int irq_received;
 	int ret = IRQ_NONE, pipe;
 	u32 flip_mask =
 		I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT |
@@ -3617,10 +3616,9 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
 	iir = I915_READ(IIR);
 
 	for (;;) {
+		bool irq_received = (iir & ~flip_mask) != 0;
 		bool blc_event = false;
 
-		irq_received = (iir & ~flip_mask) != 0;
-
 		/* Can't rely on pipestat interrupt bit in iir as it might
 		 * have been cleared after the pipestat interrupt was received.
 		 * It doesn't set the bit in iir again, but it still produces
@@ -3642,7 +3640,7 @@ static irqreturn_t i965_irq_handler(int irq, void *arg)
 					DRM_DEBUG_DRIVER("pipe %c underrun\n",
 							 pipe_name(pipe));
 				I915_WRITE(reg, pipe_stats[pipe]);
-				irq_received = 1;
+				irq_received = true;
 			}
 		}
 		spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
-- 
1.8.3.2