[Intel-gfx] Need your advice: Add a new communication inteface between HD-Audio and Gfx drivers for hotplug notification/ELD update

[Daniel Vetter]

On Wed, Jan 22, 2014 at 12:48:04PM +0000, Lin, Mengdong wrote:
> > -----Original Message-----
> > From: daniel.vetter at ffwll.ch [mailto:daniel.vetter at ffwll.ch] On Behalf Of
> > Daniel Vetter
> > Sent: Tuesday, January 21, 2014 9:11 PM
> > To: Lin, Mengdong
> > Cc: Takashi Iwai (tiwai at suse.de); Barnes, Jesse; Zanoni, Paulo R;
> > alsa-devel at alsa-project.org; intel-gfx at lists.freedesktop.org
> > Subject: Re: Need your advice: Add a new communication inteface
> > between HD-Audio and Gfx drivers for hotplug notification/ELD update
> > 
> > On Tue, Jan 21, 2014 at 1:35 PM, Lin, Mengdong <mengdong.lin at intel.com>
> > wrote:
> > > Dear audio and gfx stakeholders,
> > >
> > >
> > >
> > > We hope to add a new interface between audio and gfx driver, for gfx
> > > driver to notify audio about HDMI/DP hot-plug and ELD update.
> > >
> > > Would you please share some comments on the proposal below?
> > >
> > >
> > >
> > > Background of this issue: On Intel Haswell/Broadwell platforms, there
> > > is a HW restriction that after the display HD-Audio controller is in
> > > D3,
> > >
> > > it cannot be waken up by HDMI/DP hot-plug. Consequently, although the
> > > gfx driver can still detect the HDMI/DP hot-plug,
> > >
> > > audio driver has no idea about this and cannot notify user space
> > > whether the external HDMI/DP monitor is available for audio playback,
> > >
> > > because the audio controller cannot wake up to D0 and receive HW
> > > unsolicited event about hot-plug from the audio codec.
> > >
> > > This limitation will affect user space to decide whether we can output
> > > audio over HDMI/DP.
> > >
> > >
> > >
> > > To solve the above limitation, Takashi suggested to add a new
> > > communication interface between audio and gfx driver: create a
> > common
> > > object
> > >
> > > containing the ops registered by both graphics and audio drivers, then
> > > communicate through it, something like vga_switcheroo.
> > >
> > >
> > >
> > > Is it okay to create this kernel object in i915 driver?
> > >
> > >
> > >
> > > I915 can export an API like "display_register_audio_client" for audio
> > > driver to register a client and hot-plug notification ops.
> > >
> > >
> > >
> > > I915 can also call some API like "display_register_gfx_client" itself
> > > and register ops for audio driver to query monitor presence and ELD
> > > info on a specific port.
> > >
> > > It would be faster for audio driver than quering ELD by
> > > command/response over the HD-A bus, thus avoid delay in i915 mode
> > set.
> > >
> > > This will also avoid waking up the audio devices unnecessarily if the
> > > user space does not really want to use HDMI/DP for audio playback.
> > >
> > >
> > >
> > > Whenever i195 enables/disables audio on a port in modeset, it can call
> > > some API like "display_set_audio_state()" on this kernel object and
> > > trigger notifications to the audio driver.
> > >
> > >
> > >
> > > When the audio driver is probed (in the delayed probe stage), it can
> > > request
> > > i915 API symbol to register the audio client for this communication
> > > kernel object.
> > >
> > > Since the 1st i915 mode set may happen before audio driver registers
> > > the ops, we'll let audio driver check ELD once after registering the
> > > audio client ops.
> > >
> > > And for the platforms which uses this communication interface, we can
> > > disable unsolicited event for HDMI/DP hot-plug in the audio driver.
> > >
> > >
> > >
> > > We hope to hear your feedback and start to work out more details.
> 
> Thanks for your advice, Daniel!
> 
> > Yeah, I've discussed this at KS with Takashi and we've agreed that some
> > common object to facilitate driver interactions. A few things
> > though:
> > - This should be common infrastructure useable by all alsa and drm
> > drivers, not just i915 and snd-hda. Especially on embedded platforms this
> > issue is fairly rampant ...
> 
> Agree. Where to put this common object? 
> Is it okay to put it under /driver/gpu/drm, similar to vga_switchroo?
> Shall we divide clients into audio and gfx categories, and define
> different ops for them? Since different info/request flow in different
> direction between audio and gfx.

I guess we could place them into drivers/gpu, yeah. For a name I'd suggest
avsink or something like that, to make it clear that it's the combination
of audio+video. For the actual interfaces I guess we just need one object
in the device model, but the interface should be split into things called
from the audio side only, functions for the video driver side only and
stuff which can be called from both sides. This matters mostly just so we
don't end up with deadlocks since we need a lock to protect the avsink
state itself (e.g. the EDL or the audio_output_connected state).

> > - While at it it should also encompass power management handling of the
> > shared hw imo so that we can get rid of the hsw specific hacks for the
> > power well code. Or at least we need to rework the power well code to
> > reuse this new infrastructure, I don't really want to maintain a few copies
> > of the lazy symbol_get logic this kind of stuff requires.
> 
> Sounds good.
> 
> > - I think the biggest problem is figuring out who should register these
> > device nodes. I think it makes the most sense if we do this in the gfx driver,
> > but that requires some trickery on the alsa side (probably with using
> > -EPROBE_DEFER or something like that.
> 
> Can the new infrastructure allow audio driver to query whether gfx driver is ready?
> Maybe audio can wait until gfx is ready. For HD-Audio driver, the most
> time consuming part is delayed after the probe stage, and actually we
> can wait in the delayed phase.

Tbh I haven't really thought about this really. EPROBE_DEFER looks like
the technique used by embedded platforms, but there's also the new
aggregate device driver infrastructure that Russell King is working on for
the imx driver. Or maybe we need to hand-roll our own notification scheme.

On a hunch it's probably best if the gfx side registers this device (since
it also owns the output state in general) and that the audio side waits
until the gfx side has registered everything if it's not there yet. I also
haven't though about how the audio side could probe for the right avsink
node really ...

> > - I agree that passing ELD and all the other information through this new
> > structure makes lot more sense than the current mess we have with
> > passing the ELD through some hardware buffer.
> 
> > - Finally I think we should assign some identifier to this link which will get
> > exposed both on the drm side and in alsa, so that userspace can figure
> > out which display connects to which output. With that media player could
> > do the Right Thing and automatically place the audio stream on the right
> > pin in alsa.
> 
> Is there something that blocks media player from doing the right thing now?
> For HD-Audio, the eld entries under /proc/asound/cardx expose the ELD
> info and can help user space to check if a monitor is usable on a pin.
> Current limitation is these eld entries cannot update if the audio
> controller is in D3, so we need the new infrastructure to notify audio
> driver to update them. But I'm not sure about embedded audio, maybe
> Takashi would like to share more info.

ELD doesn't contain the serial number from the EDID, so if you have two
monitors of the same model userspace can't figure out which audio output
is connected to which screen.

Cheers, Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch