[Intel-gfx] [PATCH 04/19] drm/i915: add GEN5_IRQ_FINI

[Paulo Zanoni]

From: Paulo Zanoni <paulo.r.zanoni at intel.com>

Same as the _INIT macro: the goal is to reuse the GEN8 macros, but
there are still some slight differences.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
 drivers/gpu/drm/i915/i915_irq.c | 17 ++++++++---------
 1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 8fdbb5b..d58c392 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -103,6 +103,11 @@ static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */
 	I915_WRITE(type##IIR, 0xffffffff); \
 } while (0)
 
+#define GEN5_IRQ_FINI(type) do { \
+	I915_WRITE(type##IMR, 0xffffffff); \
+	I915_WRITE(type##IER, 0); \
+	I915_WRITE(type##IIR, I915_READ(type##IIR)); \
+} while (0)
 
 /* For display hotplug interrupt */
 static void
@@ -3060,22 +3065,16 @@ static void ironlake_irq_uninstall(struct drm_device *dev)
 
 	I915_WRITE(HWSTAM, 0xffffffff);
 
-	I915_WRITE(DEIMR, 0xffffffff);
-	I915_WRITE(DEIER, 0x0);
-	I915_WRITE(DEIIR, I915_READ(DEIIR));
+	GEN5_IRQ_FINI(DE);
 	if (IS_GEN7(dev))
 		I915_WRITE(GEN7_ERR_INT, I915_READ(GEN7_ERR_INT));
 
-	I915_WRITE(GTIMR, 0xffffffff);
-	I915_WRITE(GTIER, 0x0);
-	I915_WRITE(GTIIR, I915_READ(GTIIR));
+	GEN5_IRQ_FINI(GT);
 
 	if (HAS_PCH_NOP(dev))
 		return;
 
-	I915_WRITE(SDEIMR, 0xffffffff);
-	I915_WRITE(SDEIER, 0x0);
-	I915_WRITE(SDEIIR, I915_READ(SDEIIR));
+	GEN5_IRQ_FINI(SDE);
 	if (HAS_PCH_CPT(dev) || HAS_PCH_LPT(dev))
 		I915_WRITE(SERR_INT, I915_READ(SERR_INT));
 }
-- 
1.8.4.2