[Intel-gfx] [PATCH 07/19] drm/i915: add GEN5_IRQ_INIT
Paulo Zanoni
przanoni at gmail.com
Wed Jan 22 20:52:25 CET 2014
From: Paulo Zanoni <paulo.r.zanoni at intel.com>
And the equivalent GEN8_IRQ_INIT_NDX macro. These macros are for the
postinstall functions. The next patch will improve this macro.
Notice that I could have included POSTING_READ calls to the macro, but
that would mean the code would do a few more POSTING_READs than
necessary. OTOH it would be more fail-proof. I can change that if
needed.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
drivers/gpu/drm/i915/i915_irq.c | 33 ++++++++++++++++++---------------
1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index b77cbb8..095baa7 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -103,6 +103,16 @@ static const u32 hpd_status_i915[] = { /* i915 and valleyview are the same */
I915_WRITE(type##IIR, 0xffffffff); \
} while (0)
+#define GEN8_IRQ_INIT_NDX(type, which, imr_val, ier_val) do { \
+ I915_WRITE(GEN8_##type##_IMR(which), (imr_val)); \
+ I915_WRITE(GEN8_##type##_IER(which), (ier_val)); \
+} while (0)
+
+#define GEN5_IRQ_INIT(type, imr_val, ier_val) do { \
+ I915_WRITE(type##IMR, (imr_val)); \
+ I915_WRITE(type##IER, (ier_val)); \
+} while (0)
+
/* For display hotplug interrupt */
static void
ironlake_enable_display_irq(drm_i915_private_t *dev_priv, u32 mask)
@@ -2789,9 +2799,7 @@ static void gen5_gt_irq_postinstall(struct drm_device *dev)
}
I915_WRITE(GTIIR, I915_READ(GTIIR));
- I915_WRITE(GTIMR, dev_priv->gt_irq_mask);
- I915_WRITE(GTIER, gt_irqs);
- POSTING_READ(GTIER);
+ GEN5_IRQ_INIT(GT, dev_priv->gt_irq_mask, gt_irqs);
if (INTEL_INFO(dev)->gen >= 6) {
pm_irqs |= GEN6_PM_RPS_EVENTS;
@@ -2801,10 +2809,9 @@ static void gen5_gt_irq_postinstall(struct drm_device *dev)
dev_priv->pm_irq_mask = 0xffffffff;
I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR));
- I915_WRITE(GEN6_PMIMR, dev_priv->pm_irq_mask);
- I915_WRITE(GEN6_PMIER, pm_irqs);
- POSTING_READ(GEN6_PMIER);
+ GEN5_IRQ_INIT(GEN6_PM, dev_priv->pm_irq_mask, pm_irqs);
}
+ POSTING_READ(GTIER);
}
static int ironlake_irq_postinstall(struct drm_device *dev)
@@ -2837,9 +2844,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev)
/* should always can generate irq */
I915_WRITE(DEIIR, I915_READ(DEIIR));
- I915_WRITE(DEIMR, dev_priv->irq_mask);
- I915_WRITE(DEIER, display_mask | extra_mask);
- POSTING_READ(DEIER);
+ GEN5_IRQ_INIT(DE, dev_priv->irq_mask, display_mask | extra_mask);
gen5_gt_irq_postinstall(dev);
@@ -2935,8 +2940,7 @@ static void gen8_gt_irq_postinstall(struct drm_i915_private *dev_priv)
if (tmp)
DRM_ERROR("Interrupt (%d) should have been masked in pre-install 0x%08x\n",
i, tmp);
- I915_WRITE(GEN8_GT_IMR(i), ~gt_interrupts[i]);
- I915_WRITE(GEN8_GT_IER(i), gt_interrupts[i]);
+ GEN8_IRQ_INIT_NDX(GT, i, ~gt_interrupts[i], gt_interrupts[i]);
}
POSTING_READ(GEN8_GT_IER(0));
}
@@ -2959,13 +2963,12 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
if (tmp)
DRM_ERROR("Interrupt (%d) should have been masked in pre-install 0x%08x\n",
pipe, tmp);
- I915_WRITE(GEN8_DE_PIPE_IMR(pipe), dev_priv->de_irq_mask[pipe]);
- I915_WRITE(GEN8_DE_PIPE_IER(pipe), de_pipe_enables);
+ GEN8_IRQ_INIT_NDX(DE_PIPE, pipe, dev_priv->de_irq_mask[pipe],
+ de_pipe_enables);
}
POSTING_READ(GEN8_DE_PIPE_ISR(0));
- I915_WRITE(GEN8_DE_PORT_IMR, ~GEN8_AUX_CHANNEL_A);
- I915_WRITE(GEN8_DE_PORT_IER, GEN8_AUX_CHANNEL_A);
+ GEN5_IRQ_INIT(GEN8_DE_PORT_, ~GEN8_AUX_CHANNEL_A, GEN8_AUX_CHANNEL_A);
POSTING_READ(GEN8_DE_PORT_IER);
}
--
1.8.4.2
More information about the Intel-gfx
mailing list