[Intel-gfx] [PATCH] drm/i915: Redoing the PSR setup on resume

[Daniel Vetter]

On Fri, Jan 24, 2014 at 12:50:17AM +0530, Ramalingam C wrote:
> Due to switch between console and graphics modes multiple psr_enable
> call will be made. On such occasions, to avoid repeated psr_setup,
> a flag called psr_setup_done is used.
> 
> On suspend-resume, panel goes for a power cycle. Hence PSR setup
> should be redone to enable the PSR after suspend-resume.
> So this patch resets the corresponding flag, if it is set during the
> panel powerup process.
> 
> Signed-off-by: Ramalingam C <ramalingam.c at intel.com>
> ---
>  drivers/gpu/drm/i915/intel_ddi.c |    5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
> index 74749c6..686f8f6 100644
> --- a/drivers/gpu/drm/i915/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/intel_ddi.c
> @@ -1201,6 +1201,11 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
>  	if (type == INTEL_OUTPUT_EDP) {
>  		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
>  		ironlake_edp_panel_on(intel_dp);
> +
> +		/* Resetting the flag, to redo the PSR setup after
> +		 * panel powercycle */
> +		if (intel_dp->psr_setup_done)
> +			intel_dp->psr_setup_done = false;

Imo it's better to add this as an encoder->reset callback. That one is
only called on resume (at least in -nightly), so fits exactly. Resetting
this flag in every pre_enable is a bit much imo.

Also it sounds like we need to extend Rodrigo's psr testcase with a
suspend/resume subtest.
-Daniel

>  	}
>  
>  	WARN_ON(intel_crtc->ddi_pll_sel == PORT_CLK_SEL_NONE);
> -- 
> 1.7.9.5
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch