[Intel-gfx] [PATCH 5/9] drm/i915/bdw: Extract rp_state_caps logic

[Ben Widawsky]

We have a need for duplicated parsing of the RP_STATE_CAPS register (and
the setting of the associated fields). To reuse some code, we can
extract the function into a simple helper.

This patch also addresses the fact that we missed doing this for gen8,
something we should have done anyway.

This could be two patches, one to extract, and one to add gen8, but it's
trivial enough that I think one is fine. I will accept a request to
split it.

Signed-off-by: Ben Widawsky <ben at bwidawsk.net>
---
 drivers/gpu/drm/i915/intel_pm.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index 6acb429..ae59bd9 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -3184,6 +3184,17 @@ static void gen6_enable_rps_interrupts(struct drm_device *dev)
 	I915_WRITE(GEN6_PMINTRMSK, ~enabled_intrs);
 }
 
+static void parse_rp_state_cap(struct drm_i915_private *dev_priv, u32 rp_state_cap)
+{
+	/* In units of 50MHz */
+	dev_priv->rps.hw_max = dev_priv->rps.max_delay = rp_state_cap & 0xff;
+	dev_priv->rps.min_delay = (rp_state_cap >> 16) & 0xff;
+	dev_priv->rps.rp1_delay = (rp_state_cap >>  8) & 0xff;
+	dev_priv->rps.rp0_delay = (rp_state_cap >>  0) & 0xff;
+	dev_priv->rps.rpe_delay = dev_priv->rps.rp1_delay;
+	dev_priv->rps.cur_delay = 0;
+}
+
 static void gen8_enable_rps(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -3202,6 +3213,7 @@ static void gen8_enable_rps(struct drm_device *dev)
 	I915_WRITE(GEN6_RC_CONTROL, 0);
 
 	rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+	parse_rp_state_cap(dev_priv, rp_state_cap);
 
 	/* 2b: Program RC6 thresholds.*/
 	I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16);
@@ -3288,13 +3300,7 @@ static void gen6_enable_rps(struct drm_device *dev)
 	rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
 	gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
 
-	/* In units of 50MHz */
-	dev_priv->rps.hw_max = dev_priv->rps.max_delay = rp_state_cap & 0xff;
-	dev_priv->rps.min_delay = (rp_state_cap >> 16) & 0xff;
-	dev_priv->rps.rp1_delay = (rp_state_cap >>  8) & 0xff;
-	dev_priv->rps.rp0_delay = (rp_state_cap >>  0) & 0xff;
-	dev_priv->rps.rpe_delay = dev_priv->rps.rp1_delay;
-	dev_priv->rps.cur_delay = 0;
+	parse_rp_state_cap(dev_priv, rp_state_cap);
 
 	/* disable the counters and set deterministic thresholds */
 	I915_WRITE(GEN6_RC_CONTROL, 0);
-- 
1.8.5.3