[Intel-gfx] [PATCH i-g-t 7/9] tests/kms_universal_plane: Universal plane testing (v6)
Matt Roper
matthew.d.roper at intel.com
Tue Jul 1 01:44:28 CEST 2014
Add a simple test to exercise universal plane support.
v6:
- Update to new universal plane interface (commit parameter rather than
state-changing function). It should now be a lot more explicit which
steps are being taken with legacy API's vs universal API's now.
v5:
- Check that we don't have more than one primary or cursor. This will
catch accidental calls to drm_plane_init() in the kernel where
drm_universal_plane_init() was intended (these don't cause a compile
warning due to type compatibility between enum and bool).
v4:
- Test disabling the primary plane explicitly when it has previously
been implicitly disabled due to clipping.
- Skip test if igt_pipe_crc_new() fails
v3:
- For testing while crtc is off, switch between several different
primary plane fb's before reenabling the crtc. This will help
catch pin/unpin mistakes.
v2:
- Test that pageflips error out gracefully when the primary plane
is disabled before the ioctl, or between ioctl and pageflip
execution.
- Test that nothing blows up if we try to disable the primary plane
immediately after a pageflip (presumably before the pageflip actually
completes).
- Test that we can setup primary + sprite planes with the CRTC off and
then have them show up properly when we enable the CRTC
(drmModeSetCrtc with fb = -1).
- Test that we can modeset properly after having disabled the primary
plane
- Test that proper error codes are returned for invalid plane
programming attempts.
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
---
tests/.gitignore | 1 +
tests/Makefile.sources | 1 +
tests/kms_universal_plane.c | 577 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 579 insertions(+)
create mode 100644 tests/kms_universal_plane.c
diff --git a/tests/.gitignore b/tests/.gitignore
index 1df2078..da9af6b 100644
--- a/tests/.gitignore
+++ b/tests/.gitignore
@@ -128,6 +128,7 @@ kms_plane
kms_render
kms_setmode
kms_sink_crc_basic
+kms_universal_plane
multi-tests.txt
pm_lpsp
pm_psr
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index 17c0ab9..1ebbac5 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -72,6 +72,7 @@ TESTS_progs_M = \
kms_psr_sink_crc \
kms_render \
kms_setmode \
+ kms_universal_plane \
pm_lpsp \
pm_rpm \
pm_rps \
diff --git a/tests/kms_universal_plane.c b/tests/kms_universal_plane.c
new file mode 100644
index 0000000..fe0fde3
--- /dev/null
+++ b/tests/kms_universal_plane.c
@@ -0,0 +1,577 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "drmtest.h"
+#include "igt_debugfs.h"
+#include "igt_kms.h"
+
+typedef struct {
+ int drm_fd;
+ igt_display_t display;
+} data_t;
+
+typedef struct {
+ data_t *data;
+ igt_pipe_crc_t *pipe_crc;
+ igt_crc_t crc_1, crc_2, crc_3, crc_4, crc_5, crc_6, crc_7, crc_8,
+ crc_9, crc_10;
+ struct igt_fb red_fb, blue_fb, black_fb, yellow_fb;
+ drmModeModeInfo *mode;
+} functional_test_t;
+
+typedef struct {
+ data_t *data;
+ drmModeResPtr moderes;
+ struct igt_fb blue_fb, oversized_fb, undersized_fb;
+} sanity_test_t;
+
+typedef struct {
+ data_t *data;
+ struct igt_fb red_fb, blue_fb;
+} pageflip_test_t;
+
+static void
+functional_test_init(functional_test_t *test, igt_output_t *output, enum pipe pipe)
+{
+ data_t *data = test->data;
+ drmModeModeInfo *mode;
+
+ test->pipe_crc = igt_pipe_crc_new(pipe, INTEL_PIPE_CRC_SOURCE_AUTO);
+ if (!test->pipe_crc)
+ igt_skip("auto crc not supported on this connector with pipe %i\n",
+ pipe);
+
+
+ igt_output_set_pipe(output, pipe);
+
+ mode = igt_output_get_mode(output);
+ igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 0.0, 0.0, 0.0,
+ &test->black_fb);
+ igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 0.0, 0.0, 1.0,
+ &test->blue_fb);
+ igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 1.0, 1.0, 0.0,
+ &test->yellow_fb);
+ igt_create_color_fb(data->drm_fd, 100, 100,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 1.0, 0.0, 0.0,
+ &test->red_fb);
+
+ test->mode = mode;
+}
+
+static void
+functional_test_fini(functional_test_t *test, igt_output_t *output)
+{
+ igt_pipe_crc_free(test->pipe_crc);
+
+ igt_remove_fb(test->data->drm_fd, &test->black_fb);
+ igt_remove_fb(test->data->drm_fd, &test->blue_fb);
+ igt_remove_fb(test->data->drm_fd, &test->red_fb);
+ igt_remove_fb(test->data->drm_fd, &test->yellow_fb);
+
+ igt_output_set_pipe(output, PIPE_ANY);
+ igt_display_commit2(&test->data->display, COMMIT_LEGACY);
+}
+
+/*
+ * Universal plane functional testing.
+ * - Black primary plane via traditional interfaces, red sprite, grab CRC:1.
+ * - Blue primary plane via traditional interfaces, red sprite, grab CRC:2.
+ * - Yellow primary via traditional interfaces
+ * - Blue primary plane, red sprite via universal planes, grab CRC:3 and compare
+ * with CRC:2 (should be the same)
+ * - Disable primary plane, grab CRC:4 (should be same as CRC:1)
+ * - Reenable primary, grab CRC:5 (should be same as CRC:2 and CRC:3)
+ * - Yellow primary, no sprite
+ * - Disable CRTC
+ * - Program red sprite (while CRTC off)
+ * - Program blue primary (while CRTC off)
+ * - Enable CRTC, grab CRC:6 (should be same as CRC:2)
+ */
+static void
+functional_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
+{
+ functional_test_t test = { .data = data };
+ igt_display_t *display = &data->display;
+ igt_plane_t *primary, *sprite;
+ int ret;
+ int num_primary = 0, num_cursor = 0;
+ int i;
+
+ igt_skip_on(pipe >= display->n_pipes);
+
+ fprintf(stdout, "Testing connector %s using pipe %c\n",
+ igt_output_name(output), pipe_name(pipe));
+
+ functional_test_init(&test, output, pipe);
+
+ /*
+ * Make sure we have no more than one primary or cursor plane per crtc.
+ * If the kernel accidentally calls drm_plane_init() rather than
+ * drm_universal_plane_init(), the type enum can get interpreted as a
+ * boolean and show up in userspace as the wrong type.
+ */
+ for (i = 0; i < display->pipes[pipe].n_planes; i++)
+ if (display->pipes[pipe].planes[i].is_primary)
+ num_primary++;
+ else if (display->pipes[pipe].planes[i].is_cursor)
+ num_cursor++;
+
+ igt_assert(num_primary == 1);
+ igt_assert(num_cursor <= 1);
+
+ primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+ sprite = igt_output_get_plane(output, IGT_PLANE_2);
+ if (!sprite) {
+ functional_test_fini(&test, output);
+ igt_skip("No sprite plane available\n");
+ }
+
+ igt_plane_set_position(sprite, 100, 100);
+
+ /* Step 1: Legacy API's, black primary, red sprite (CRC 1) */
+ igt_plane_set_fb(primary, &test.black_fb);
+ igt_plane_set_fb(sprite, &test.red_fb);
+ igt_display_commit2(display, COMMIT_LEGACY);
+ igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_1);
+
+ /* Step 2: Legacy API', blue primary, red sprite (CRC 2) */
+ igt_plane_set_fb(primary, &test.blue_fb);
+ igt_plane_set_fb(sprite, &test.red_fb);
+ igt_display_commit2(display, COMMIT_LEGACY);
+ igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_2);
+
+ /* Step 3: Legacy API's, yellow primary (CRC 3) */
+ igt_plane_set_fb(primary, &test.yellow_fb);
+ igt_display_commit2(display, COMMIT_LEGACY);
+ igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_3);
+
+ /* Step 4: Universal API's, blue primary, red sprite (CRC 4) */
+ igt_plane_set_fb(primary, &test.blue_fb);
+ igt_plane_set_fb(sprite, &test.red_fb);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+ igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_4);
+
+ /* Step 5: Universal API's, disable primary plane (CRC 5) */
+ igt_plane_set_fb(primary, NULL);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+ igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_5);
+
+ /* Step 6: Universal API's, re-enable primary with blue (CRC 6) */
+ igt_plane_set_fb(primary, &test.blue_fb);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+ igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_6);
+
+ /* Step 7: Legacy API's, yellow primary, no sprite */
+ igt_plane_set_fb(primary, &test.yellow_fb);
+ igt_plane_set_fb(sprite, NULL);
+ igt_display_commit2(display, COMMIT_LEGACY);
+
+ /* Step 8: Disable CRTC */
+ igt_plane_set_fb(primary, NULL);
+ igt_display_commit2(display, COMMIT_LEGACY);
+
+ /* Step 9: Universal API's with crtc off:
+ * - red sprite
+ * - multiple primary fb's, ending in blue
+ */
+ igt_plane_set_fb(sprite, &test.red_fb);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+ igt_plane_set_fb(primary, &test.yellow_fb);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+ igt_plane_set_fb(primary, &test.black_fb);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+ igt_plane_set_fb(primary, &test.blue_fb);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* Step 10: Enable crtc (fb = -1), take CRC (CRC 7) */
+ ret = drmModeSetCrtc(data->drm_fd, output->config.crtc->crtc_id, -1,
+ 0, 0, &output->config.connector->connector_id,
+ 1, test.mode);
+ igt_assert(ret == 0);
+ igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_7);
+
+ /* Step 11: Disable primary plane */
+ igt_plane_set_fb(primary, NULL);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+
+ /* Step 12: Legacy modeset to yellow FB (CRC 8) */
+ igt_plane_set_fb(primary, &test.yellow_fb);
+ igt_display_commit2(display, COMMIT_LEGACY);
+ igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_8);
+
+ /* Step 13: Legacy API', blue primary, red sprite */
+ igt_plane_set_fb(primary, &test.blue_fb);
+ igt_plane_set_fb(sprite, &test.red_fb);
+ igt_display_commit2(display, COMMIT_LEGACY);
+
+ /* Step 14: Universal API, set primary completely offscreen (CRC 9) */
+ ret = drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
+ output->config.crtc->crtc_id,
+ test.blue_fb.fb_id, 0,
+ 9000, 9000,
+ test.mode->hdisplay,
+ test.mode->vdisplay,
+ IGT_FIXED(0,0), IGT_FIXED(0,0),
+ IGT_FIXED(test.mode->hdisplay,0),
+ IGT_FIXED(test.mode->vdisplay,0));
+ igt_assert(ret == 0);
+ igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_9);
+
+ /*
+ * Step 15: Explicitly disable primary after it's already been
+ * implicitly disabled (CRC 10).
+ */
+ igt_plane_set_fb(primary, NULL);
+ igt_display_commit2(display, COMMIT_UNIVERSAL);
+ igt_pipe_crc_collect_crc(test.pipe_crc, &test.crc_10);
+
+ /* Step 16: Legacy API's, blue primary, red sprite */
+ igt_plane_set_fb(primary, &test.blue_fb);
+ igt_plane_set_fb(sprite, &test.red_fb);
+ igt_display_commit2(display, COMMIT_LEGACY);
+
+ /* Blue bg + red sprite should be same under both types of API's */
+ igt_assert(igt_crc_equal(&test.crc_2, &test.crc_4));
+
+ /* Disabling primary plane should be same as black primary */
+ igt_assert(igt_crc_equal(&test.crc_1, &test.crc_5));
+
+ /* Re-enabling primary should return to blue properly */
+ igt_assert(igt_crc_equal(&test.crc_2, &test.crc_6));
+
+ /*
+ * We should be able to setup plane FB's while CRTC is disabled and
+ * then have them pop up correctly when the CRTC is re-enabled.
+ */
+ igt_assert(igt_crc_equal(&test.crc_2, &test.crc_7));
+
+ /*
+ * We should be able to modeset with the primary plane off
+ * successfully
+ */
+ igt_assert(igt_crc_equal(&test.crc_3, &test.crc_8));
+
+ /*
+ * We should be able to move the primary plane completely offscreen
+ * and have it disable successfully.
+ */
+ igt_assert(igt_crc_equal(&test.crc_5, &test.crc_9));
+
+ /*
+ * We should be able to explicitly disable an already
+ * implicitly-disabled primary plane
+ */
+ igt_assert(igt_crc_equal(&test.crc_5, &test.crc_10));
+
+ igt_plane_set_fb(primary, NULL);
+ igt_plane_set_fb(sprite, NULL);
+
+ functional_test_fini(&test, output);
+}
+
+static void
+sanity_test_init(sanity_test_t *test, igt_output_t *output, enum pipe pipe)
+{
+ data_t *data = test->data;
+ drmModeModeInfo *mode;
+
+ igt_output_set_pipe(output, pipe);
+
+ mode = igt_output_get_mode(output);
+ igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 0.0, 0.0, 1.0,
+ &test->blue_fb);
+ igt_create_color_fb(data->drm_fd,
+ mode->hdisplay + 100, mode->vdisplay + 100,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 0.0, 0.0, 1.0,
+ &test->oversized_fb);
+ igt_create_color_fb(data->drm_fd,
+ mode->hdisplay - 100, mode->vdisplay - 100,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 0.0, 0.0, 1.0,
+ &test->undersized_fb);
+
+ test->moderes = drmModeGetResources(data->drm_fd);
+}
+
+static void
+sanity_test_fini(sanity_test_t *test, igt_output_t *output)
+{
+ drmModeFreeResources(test->moderes);
+
+ igt_remove_fb(test->data->drm_fd, &test->oversized_fb);
+ igt_remove_fb(test->data->drm_fd, &test->undersized_fb);
+ igt_remove_fb(test->data->drm_fd, &test->blue_fb);
+
+ igt_output_set_pipe(output, PIPE_ANY);
+ igt_display_commit2(&test->data->display, COMMIT_LEGACY);
+}
+
+/*
+ * Universal plane sanity testing.
+ * - Primary doesn't cover CRTC
+ * - Primary plane tries to scale down
+ * - Primary plane tries to scale up
+ */
+static void
+sanity_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
+{
+ sanity_test_t test = { .data = data };
+ igt_plane_t *primary;
+ drmModeModeInfo *mode;
+ int i, ret = 0;
+
+ igt_output_set_pipe(output, pipe);
+ mode = igt_output_get_mode(output);
+
+ sanity_test_init(&test, output, pipe);
+
+ primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+
+ /* Use legacy API to set a mode with a blue FB */
+ igt_plane_set_fb(primary, &test.blue_fb);
+ igt_display_commit2(&data->display, COMMIT_LEGACY);
+
+ /*
+ * Try to use universal plane API to set primary plane that
+ * doesn't cover CRTC (should fail).
+ */
+ igt_plane_set_fb(primary, &test.undersized_fb);
+ ret = igt_display_try_commit2(&data->display, COMMIT_UNIVERSAL);
+ igt_assert(ret == -EINVAL);
+
+ /* Same as above, but different plane positioning. */
+ igt_plane_set_position(primary, 100, 100);
+ ret = igt_display_try_commit2(&data->display, COMMIT_UNIVERSAL);
+ igt_assert(ret == -EINVAL);
+
+ igt_plane_set_position(primary, 0, 0);
+
+ /* Try to use universal plane API to scale down (should fail) */
+ ret = drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
+ output->config.crtc->crtc_id,
+ test.oversized_fb.fb_id, 0,
+ 0, 0,
+ mode->hdisplay + 100,
+ mode->vdisplay + 100,
+ IGT_FIXED(0,0), IGT_FIXED(0,0),
+ IGT_FIXED(mode->hdisplay,0),
+ IGT_FIXED(mode->vdisplay,0));
+ igt_assert(ret == -ERANGE);
+
+ /* Try to use universal plane API to scale up (should fail) */
+ ret = drmModeSetPlane(data->drm_fd, primary->drm_plane->plane_id,
+ output->config.crtc->crtc_id,
+ test.oversized_fb.fb_id, 0,
+ 0, 0,
+ mode->hdisplay,
+ mode->vdisplay,
+ IGT_FIXED(0,0), IGT_FIXED(0,0),
+ IGT_FIXED(mode->hdisplay - 100,0),
+ IGT_FIXED(mode->vdisplay - 100,0));
+ igt_assert(ret == -ERANGE);
+
+ /* Find other crtcs and try to program our primary plane on them */
+ for (i = 0; i < test.moderes->count_crtcs; i++)
+ if (test.moderes->crtcs[i] != output->config.crtc->crtc_id) {
+ ret = drmModeSetPlane(data->drm_fd,
+ primary->drm_plane->plane_id,
+ test.moderes->crtcs[i],
+ test.blue_fb.fb_id, 0,
+ 0, 0,
+ mode->hdisplay,
+ mode->vdisplay,
+ IGT_FIXED(0,0), IGT_FIXED(0,0),
+ IGT_FIXED(mode->hdisplay,0),
+ IGT_FIXED(mode->vdisplay,0));
+ igt_assert(ret == -EINVAL);
+ }
+
+ igt_plane_set_fb(primary, NULL);
+ sanity_test_fini(&test, output);
+}
+
+static void
+pageflip_test_init(pageflip_test_t *test, igt_output_t *output, enum pipe pipe)
+{
+ data_t *data = test->data;
+ drmModeModeInfo *mode;
+
+ igt_output_set_pipe(output, pipe);
+
+ mode = igt_output_get_mode(output);
+ igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 1.0, 0.0, 0.0,
+ &test->red_fb);
+ igt_create_color_fb(data->drm_fd, mode->hdisplay, mode->vdisplay,
+ DRM_FORMAT_XRGB8888,
+ false, /* tiled */
+ 0.0, 0.0, 1.0,
+ &test->blue_fb);
+}
+
+static void
+pageflip_test_fini(pageflip_test_t *test, igt_output_t *output)
+{
+ igt_remove_fb(test->data->drm_fd, &test->red_fb);
+ igt_remove_fb(test->data->drm_fd, &test->blue_fb);
+
+ igt_output_set_pipe(output, PIPE_ANY);
+ igt_display_commit2(&test->data->display, COMMIT_LEGACY);
+}
+
+static void
+pageflip_test_pipe(data_t *data, enum pipe pipe, igt_output_t *output)
+{
+ pageflip_test_t test = { .data = data };
+ igt_plane_t *primary;
+ struct timeval timeout = { .tv_sec = 0, .tv_usec = 500 };
+ drmEventContext evctx = { .version = DRM_EVENT_CONTEXT_VERSION };
+
+ fd_set fds;
+ int ret = 0;
+
+ igt_output_set_pipe(output, pipe);
+
+ pageflip_test_init(&test, output, pipe);
+
+ primary = igt_output_get_plane(output, IGT_PLANE_PRIMARY);
+
+ /* Use legacy API to set a mode with a blue FB */
+ igt_plane_set_fb(primary, &test.blue_fb);
+ igt_display_commit2(&data->display, COMMIT_LEGACY);
+
+ /* Disable the primary plane */
+ igt_plane_set_fb(primary, NULL);
+ igt_display_commit2(&data->display, COMMIT_UNIVERSAL);
+
+ /*
+ * Issue a pageflip to red FB
+ *
+ * Note that crtc->primary->fb = NULL causes flip to return EBUSY for
+ * historical reasons...
+ */
+ ret = drmModePageFlip(data->drm_fd, output->config.crtc->crtc_id,
+ test.red_fb.fb_id, 0, NULL);
+ igt_assert(ret == -EBUSY);
+
+ /* Turn primary plane back on */
+ igt_plane_set_fb(primary, &test.blue_fb);
+ igt_display_commit2(&data->display, COMMIT_UNIVERSAL);
+
+ /*
+ * Issue a pageflip to red, then immediately try to disable the primary
+ * plane, hopefully before the pageflip has a chance to complete. The
+ * plane disable operation should wind up blocking while the pageflip
+ * completes, which we don't have a good way to specifically test for,
+ * but at least we can make sure that nothing blows up.
+ */
+ ret = drmModePageFlip(data->drm_fd, output->config.crtc->crtc_id,
+ test.red_fb.fb_id, DRM_MODE_PAGE_FLIP_EVENT,
+ &test);
+ igt_assert(ret == 0);
+ igt_plane_set_fb(primary, NULL);
+ igt_display_commit2(&data->display, COMMIT_UNIVERSAL);
+
+ /* Wait for pageflip completion, then consume event on fd */
+ FD_ZERO(&fds);
+ FD_SET(data->drm_fd, &fds);
+ do {
+ ret = select(data->drm_fd + 1, &fds, NULL, NULL, &timeout);
+ } while (ret < 0 && errno == EINTR);
+ igt_assert(ret == 1);
+ ret = drmHandleEvent(data->drm_fd, &evctx);
+ igt_assert(ret == 0);
+
+ igt_plane_set_fb(primary, NULL);
+ pageflip_test_fini(&test, output);
+}
+
+static void
+run_tests_for_pipe(data_t *data, enum pipe pipe)
+{
+ igt_output_t *output;
+
+ igt_assert(data->display.has_universal_planes);
+
+ igt_subtest_f("universal-plane-pipe-%c-functional", pipe_name(pipe))
+ for_each_connected_output(&data->display, output)
+ functional_test_pipe(data, pipe, output);
+
+ igt_subtest_f("universal-plane-pipe-%c-sanity", pipe_name(pipe))
+ for_each_connected_output(&data->display, output)
+ sanity_test_pipe(data, pipe, output);
+
+ igt_subtest_f("disable-primary-vs-flip-pipe-%c", pipe_name(pipe))
+ for_each_connected_output(&data->display, output)
+ pageflip_test_pipe(data, pipe, output);
+}
+
+static data_t data;
+
+igt_main
+{
+
+ igt_skip_on_simulation();
+
+ igt_fixture {
+ data.drm_fd = drm_open_any();
+
+ igt_set_vt_graphics_mode();
+
+ igt_require_pipe_crc();
+ igt_display_init(&data.display, data.drm_fd);
+
+ igt_require(data.display.has_universal_planes);
+ }
+
+ for (int pipe = 0; pipe < 3; pipe++)
+ run_tests_for_pipe(&data, pipe);
+
+ igt_fixture {
+ igt_display_fini(&data.display);
+ }
+}
--
1.8.5.1
More information about the Intel-gfx
mailing list