[Intel-gfx] [Xen-devel] [v5][PATCH 0/5] xen: add Intel IGD passthrough support

[Konrad Rzeszutek Wilk]

On Wed, Jul 02, 2014 at 05:08:43PM +0300, Michael S. Tsirkin wrote:
> On Wed, Jul 02, 2014 at 10:00:33AM -0400, Konrad Rzeszutek Wilk wrote:
> > On Wed, Jul 02, 2014 at 01:33:09PM +0200, Paolo Bonzini wrote:
> > > Il 01/07/2014 19:39, Ross Philipson ha scritto:
> > > >
> > > >We do IGD pass-through in our project (XenClient). The patches
> > > >originally came from our project. We surface the same ISA bridge and
> > > >have never had activation issues on any version of Widows from XP to
> > > >Win8. We do not normally run server platforms so I can't say for sure
> > > >there.
> > > 
> > > The problem is not activation, the problem is that the patches are making
> > > assumptions on the driver and the firmware that might work today but are
> > > IMHO just not sane.
> > > 
> > > I would have no problem with a clean patchset that adds a new machine type
> > > and doesn't touch code in "-M pc", but it looks like mst disagrees.
> > > Ultimately, if a patchset is too hacky for upstream, you can include it in
> > > your downstream XenClient (and XenServer) QEMU branch.  It happens.
> > 
> > And then this discussion will come back again in a year when folks
> > rebase and ask: Why hasn't this been done upstream.
> > 
> > Then the discussion resumes ..
> > 
> > With this long thread I lost a bit context about the challenges
> > that exists. But let me try summarizing it here - which will hopefully
> > get some consensus.
> 
> Before I answer could you clarify please:
> by Southbridge do you mean the PCH at slot 1f or the MCH at slot 0 or both?

MCH slot. We read/write from this (see intel_setup_mchbar) from couple of
registers (0x44 and 0x48 if gen >= 4, otherwise 0x54). It is hard-coded
in the i915_get_bridge_dev (see ec2a4c3fdc8e82fe82a25d800e85c1ea06b74372)
as 0:0.0 BDF.

The PCH (does not matter where it sits) we only use the model:vendor id
to figure out the pch_type (see intel_detect_pch).

I don't see why that model:vendor_id can't be exposed via checking the
type of device:vendor_id of the IGD itself. CC-ing some Intel i915 authors.

So for the discussion here, when I say Southbridge I mean MCH.
> 
> > 1). Fix IGD hardware to not use Southbridge magic addresses.
> >     We can moan and moan but I doubt it is going to change.
> > 
> > 2). Since we need the Southbridge magic addresses, we can expose
> >     an bridge. [I think everybody agrees that we need to do
> >     that since 1) is no go).
> > 
> > 3). What kind of bridge. We can do:
> > 
> >      a) Two bridges - one 'passthrough' and the legacy ISA bridge
> >         that QEMU emulates. Both Linux and Windows are OK with
> >         two bridges (even thought it is pretty weird).
> > 
> >      b) One bridge - the one that QEMU emulates - and lets emulate
> >         more of the registers (by emulate - I mean for some get the
> >         data from the real hardware).
> > 
> >            b1). We can't use the legacy because the registers are
> >                 above 256 (is that correct? Did I miss something?)
> > 
> >            b2)  We would need to use the Q35.
> >                 b2a). If we need Q35, that needs to be exposed in
> >                       for Xen guests. That means exposing the 
> >                       MMCONFIG and restructing the E820 to fit that
> >                       in.
> >                       Problem:
> >                         - Migration is not working with Q35.
> >                           (But for v1 you wouldn't migrate, however
> >                            later hardware will surely have SR-IOV so
> >                            we will need to migrate).
> > 
> >                         - There are no developers who have an OK
> >                           from their management to focus on this.
> >                            (Potential solution: Poke Intel management to see
> >                             if they can get more developers on it)
> >                           
> > 
> > 4). Code does a bit of sysfs that could use some refacturing with
> >     the KVM code.
> >     Problem: More time needed to do the code restructing.
> > 
> > 
> > Is that about correct?
> > 
> > What are folks timezones and the best days next week to talk about
> > this on either Google Hangout or the phone?