[Intel-gfx] [PATCH 11/19] drm/i915: Precompute static ddi_pll_sel values in encoders
Paulo Zanoni
przanoni at gmail.com
Fri Jul 4 16:26:04 CEST 2014
From: Daniel Vetter <daniel.vetter at ffwll.ch>
This way only the dynamic WRPLL selection for hdmi ddi mode is
done in intel_ddi_pll_select.
v2: Don't clobber the precomputed values when selecting clocks fro
hdmi encoders.
v3 (from Paulo): Rebase on top of the s/IS_HASWELL/HAS_DDI/ patch.
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/intel_crt.c | 4 +++-
drivers/gpu/drm/i915/intel_ddi.c | 34 +++-------------------------------
drivers/gpu/drm/i915/intel_dp.c | 23 ++++++++++++++++++++---
3 files changed, 26 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 76ffa2c..88db4b6 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -315,8 +315,10 @@ static bool intel_crt_compute_config(struct intel_encoder *encoder,
pipe_config->pipe_bpp = 24;
/* FDI must always be 2.7 GHz */
- if (HAS_DDI(dev))
+ if (HAS_DDI(dev)) {
+ pipe_config->ddi_pll_sel = PORT_CLK_SEL_SPLL;
pipe_config->port_clock = 135000 * 2;
+ }
return true;
}
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 5356e3e..6e976ba 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -403,6 +403,7 @@ void intel_ddi_put_crtc_pll(struct drm_crtc *crtc)
I915_WRITE(WRPLL_CTL1, val & ~WRPLL_PLL_ENABLE);
POSTING_READ(WRPLL_CTL1);
}
+ intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_NONE;
break;
case PORT_CLK_SEL_WRPLL2:
plls->wrpll2_refcount--;
@@ -413,13 +414,12 @@ void intel_ddi_put_crtc_pll(struct drm_crtc *crtc)
I915_WRITE(WRPLL_CTL2, val & ~WRPLL_PLL_ENABLE);
POSTING_READ(WRPLL_CTL2);
}
+ intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_NONE;
break;
}
WARN(plls->wrpll1_refcount < 0, "Invalid WRPLL1 refcount\n");
WARN(plls->wrpll2_refcount < 0, "Invalid WRPLL2 refcount\n");
-
- intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_NONE;
}
#define LC_FREQ 2700
@@ -739,7 +739,6 @@ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc)
{
struct drm_crtc *crtc = &intel_crtc->base;
struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
- struct drm_encoder *encoder = &intel_encoder->base;
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
int type = intel_encoder->type;
@@ -748,26 +747,7 @@ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc)
intel_ddi_put_crtc_pll(crtc);
- if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
- struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-
- switch (intel_dp->link_bw) {
- case DP_LINK_BW_1_62:
- intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
- break;
- case DP_LINK_BW_2_7:
- intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
- break;
- case DP_LINK_BW_5_4:
- intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
- break;
- default:
- DRM_ERROR("Link bandwidth %d unsupported\n",
- intel_dp->link_bw);
- return false;
- }
-
- } else if (type == INTEL_OUTPUT_HDMI) {
+ if (type == INTEL_OUTPUT_HDMI) {
uint32_t reg, val;
unsigned p, n2, r2;
@@ -808,14 +788,6 @@ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc)
plls->wrpll2_refcount++;
intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_WRPLL2;
}
-
- } else if (type == INTEL_OUTPUT_ANALOG) {
- DRM_DEBUG_KMS("Using SPLL on pipe %c\n",
- pipe_name(pipe));
- intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_SPLL;
- } else {
- WARN(1, "Invalid DDI encoder type %d\n", type);
- return false;
}
return true;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index aedce65..69db121 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -746,6 +746,22 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector)
}
static void
+hsw_dp_set_ddi_pll_sel(struct intel_crtc_config *pipe_config, int link_bw)
+{
+ switch (link_bw) {
+ case DP_LINK_BW_1_62:
+ pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
+ break;
+ case DP_LINK_BW_2_7:
+ pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
+ break;
+ case DP_LINK_BW_5_4:
+ pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
+ break;
+ }
+}
+
+static void
intel_dp_set_clock(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config, int link_bw)
{
@@ -756,8 +772,6 @@ intel_dp_set_clock(struct intel_encoder *encoder,
if (IS_G4X(dev)) {
divisor = gen4_dpll;
count = ARRAY_SIZE(gen4_dpll);
- } else if (HAS_DDI(dev)) {
- /* Haswell has special-purpose DP DDI clocks. */
} else if (HAS_PCH_SPLIT(dev)) {
divisor = pch_dpll;
count = ARRAY_SIZE(pch_dpll);
@@ -928,7 +942,10 @@ found:
&pipe_config->dp_m2_n2);
}
- intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
+ if (HAS_DDI(dev))
+ hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw);
+ else
+ intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
return true;
}
--
2.0.0
More information about the Intel-gfx
mailing list