[Intel-gfx] [PATCH 09/43] drm/i915/bdw: Populate LR contexts (somewhat)
Thomas Daniel
thomas.daniel at intel.com
Thu Jul 24 18:04:17 CEST 2014
From: Oscar Mateo <oscar.mateo at intel.com>
For the most part, logical ring context objects are similar to hardware
contexts in that the backing object is meant to be opaque. There are
some exceptions where we need to poke certain offsets of the object for
initialization, updating the tail pointer or updating the PDPs.
For our basic execlist implementation we'll only need our PPGTT PDs,
and ringbuffer addresses in order to set up the context. With previous
patches, we have both, so start prepping the context to be load.
Before running a context for the first time you must populate some
fields in the context object. These fields begin 1 PAGE + LRCA, ie. the
first page (in 0 based counting) of the context image. These same
fields will be read and written to as contexts are saved and restored
once the system is up and running.
Many of these fields are completely reused from previous global
registers: ringbuffer head/tail/control, context control matches some
previous MI_SET_CONTEXT flags, and page directories. There are other
fields which we don't touch which we may want in the future.
v2: CTX_LRI_HEADER_0 is MI_LOAD_REGISTER_IMM(14) for render and (11)
for other engines.
v3: Several rebases and general changes to the code.
v4: Squash with "Extract LR context object populating"
Also, Damien's review comments:
- Set the Force Posted bit on the LRI header, as the BSpec suggest we do.
- Prevent warning when compiling a 32-bits kernel without HIGHMEM64.
- Add a clarifying comment to the context population code.
v5: Damien's review comments:
- The third MI_LOAD_REGISTER_IMM in the context does not set Force Posted.
- Remove dead code.
v6: Add a note about the (presumed) differences between BDW and CHV state
contexts. Also, Brad's review comments:
- Use the _MASKED_BIT_ENABLE, upper_32_bits and lower_32_bits macros.
- Be less magical about how we set the ring size in the context.
Signed-off-by: Ben Widawsky <ben at bwidawsk.net> (v1)
Signed-off-by: Rafael Barbalho <rafael.barbalho at intel.com> (v2)
Signed-off-by: Oscar Mateo <oscar.mateo at intel.com>
---
drivers/gpu/drm/i915/i915_reg.h | 1 +
drivers/gpu/drm/i915/intel_lrc.c | 159 +++++++++++++++++++++++++++++++++++++-
2 files changed, 156 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index ce70aa4..043a6ea 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -282,6 +282,7 @@
* address/value pairs. Don't overdue it, though, x <= 2^4 must hold!
*/
#define MI_LOAD_REGISTER_IMM(x) MI_INSTR(0x22, 2*(x)-1)
+#define MI_LRI_FORCE_POSTED (1<<12)
#define MI_STORE_REGISTER_MEM(x) MI_INSTR(0x24, 2*(x)-1)
#define MI_STORE_REGISTER_MEM_GEN8(x) MI_INSTR(0x24, 3*(x)-1)
#define MI_SRM_LRM_GLOBAL_GTT (1<<22)
diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c
index 2eb7db6..cf322ec 100644
--- a/drivers/gpu/drm/i915/intel_lrc.c
+++ b/drivers/gpu/drm/i915/intel_lrc.c
@@ -46,6 +46,38 @@
#define GEN8_LR_CONTEXT_ALIGN 4096
+#define RING_ELSP(ring) ((ring)->mmio_base+0x230)
+#define RING_CONTEXT_CONTROL(ring) ((ring)->mmio_base+0x244)
+
+#define CTX_LRI_HEADER_0 0x01
+#define CTX_CONTEXT_CONTROL 0x02
+#define CTX_RING_HEAD 0x04
+#define CTX_RING_TAIL 0x06
+#define CTX_RING_BUFFER_START 0x08
+#define CTX_RING_BUFFER_CONTROL 0x0a
+#define CTX_BB_HEAD_U 0x0c
+#define CTX_BB_HEAD_L 0x0e
+#define CTX_BB_STATE 0x10
+#define CTX_SECOND_BB_HEAD_U 0x12
+#define CTX_SECOND_BB_HEAD_L 0x14
+#define CTX_SECOND_BB_STATE 0x16
+#define CTX_BB_PER_CTX_PTR 0x18
+#define CTX_RCS_INDIRECT_CTX 0x1a
+#define CTX_RCS_INDIRECT_CTX_OFFSET 0x1c
+#define CTX_LRI_HEADER_1 0x21
+#define CTX_CTX_TIMESTAMP 0x22
+#define CTX_PDP3_UDW 0x24
+#define CTX_PDP3_LDW 0x26
+#define CTX_PDP2_UDW 0x28
+#define CTX_PDP2_LDW 0x2a
+#define CTX_PDP1_UDW 0x2c
+#define CTX_PDP1_LDW 0x2e
+#define CTX_PDP0_UDW 0x30
+#define CTX_PDP0_LDW 0x32
+#define CTX_LRI_HEADER_2 0x41
+#define CTX_R_PWR_CLK_STATE 0x42
+#define CTX_GPGPU_CSR_BASE_ADDRESS 0x44
+
int intel_sanitize_enable_execlists(struct drm_device *dev, int enable_execlists)
{
if (enable_execlists == 0)
@@ -57,6 +89,115 @@ int intel_sanitize_enable_execlists(struct drm_device *dev, int enable_execlists
return 0;
}
+static int
+populate_lr_context(struct intel_context *ctx, struct drm_i915_gem_object *ctx_obj,
+ struct intel_engine_cs *ring, struct intel_ringbuffer *ringbuf)
+{
+ struct drm_i915_gem_object *ring_obj = ringbuf->obj;
+ struct i915_hw_ppgtt *ppgtt = ctx_to_ppgtt(ctx);
+ struct page *page;
+ uint32_t *reg_state;
+ int ret;
+
+ ret = i915_gem_object_set_to_cpu_domain(ctx_obj, true);
+ if (ret) {
+ DRM_DEBUG_DRIVER("Could not set to CPU domain\n");
+ return ret;
+ }
+
+ ret = i915_gem_object_get_pages(ctx_obj);
+ if (ret) {
+ DRM_DEBUG_DRIVER("Could not get object pages\n");
+ return ret;
+ }
+
+ i915_gem_object_pin_pages(ctx_obj);
+
+ /* The second page of the context object contains some fields which must
+ * be set up prior to the first execution. */
+ page = i915_gem_object_get_page(ctx_obj, 1);
+ reg_state = kmap_atomic(page);
+
+ /* A context is actually a big batch buffer with several MI_LOAD_REGISTER_IMM
+ * commands followed by (reg, value) pairs. The values we are setting here are
+ * only for the first context restore: on a subsequent save, the GPU will
+ * recreate this batchbuffer with new values (including all the missing
+ * MI_LOAD_REGISTER_IMM commands that we are not initializing here). */
+ if (ring->id == RCS)
+ reg_state[CTX_LRI_HEADER_0] = MI_LOAD_REGISTER_IMM(14);
+ else
+ reg_state[CTX_LRI_HEADER_0] = MI_LOAD_REGISTER_IMM(11);
+ reg_state[CTX_LRI_HEADER_0] |= MI_LRI_FORCE_POSTED;
+ reg_state[CTX_CONTEXT_CONTROL] = RING_CONTEXT_CONTROL(ring);
+ reg_state[CTX_CONTEXT_CONTROL+1] =
+ _MASKED_BIT_ENABLE((1<<3) | MI_RESTORE_INHIBIT);
+ reg_state[CTX_RING_HEAD] = RING_HEAD(ring->mmio_base);
+ reg_state[CTX_RING_HEAD+1] = 0;
+ reg_state[CTX_RING_TAIL] = RING_TAIL(ring->mmio_base);
+ reg_state[CTX_RING_TAIL+1] = 0;
+ reg_state[CTX_RING_BUFFER_START] = RING_START(ring->mmio_base);
+ reg_state[CTX_RING_BUFFER_START+1] = i915_gem_obj_ggtt_offset(ring_obj);
+ reg_state[CTX_RING_BUFFER_CONTROL] = RING_CTL(ring->mmio_base);
+ reg_state[CTX_RING_BUFFER_CONTROL+1] =
+ ((ringbuf->size - PAGE_SIZE) & RING_NR_PAGES) | RING_VALID;
+ reg_state[CTX_BB_HEAD_U] = ring->mmio_base + 0x168;
+ reg_state[CTX_BB_HEAD_U+1] = 0;
+ reg_state[CTX_BB_HEAD_L] = ring->mmio_base + 0x140;
+ reg_state[CTX_BB_HEAD_L+1] = 0;
+ reg_state[CTX_BB_STATE] = ring->mmio_base + 0x110;
+ reg_state[CTX_BB_STATE+1] = (1<<5);
+ reg_state[CTX_SECOND_BB_HEAD_U] = ring->mmio_base + 0x11c;
+ reg_state[CTX_SECOND_BB_HEAD_U+1] = 0;
+ reg_state[CTX_SECOND_BB_HEAD_L] = ring->mmio_base + 0x114;
+ reg_state[CTX_SECOND_BB_HEAD_L+1] = 0;
+ reg_state[CTX_SECOND_BB_STATE] = ring->mmio_base + 0x118;
+ reg_state[CTX_SECOND_BB_STATE+1] = 0;
+ if (ring->id == RCS) {
+ /* TODO: according to BSpec, the register state context
+ * for CHV does not have these. OTOH, these registers do
+ * exist in CHV. I'm waiting for a clarification */
+ reg_state[CTX_BB_PER_CTX_PTR] = ring->mmio_base + 0x1c0;
+ reg_state[CTX_BB_PER_CTX_PTR+1] = 0;
+ reg_state[CTX_RCS_INDIRECT_CTX] = ring->mmio_base + 0x1c4;
+ reg_state[CTX_RCS_INDIRECT_CTX+1] = 0;
+ reg_state[CTX_RCS_INDIRECT_CTX_OFFSET] = ring->mmio_base + 0x1c8;
+ reg_state[CTX_RCS_INDIRECT_CTX_OFFSET+1] = 0;
+ }
+ reg_state[CTX_LRI_HEADER_1] = MI_LOAD_REGISTER_IMM(9);
+ reg_state[CTX_LRI_HEADER_1] |= MI_LRI_FORCE_POSTED;
+ reg_state[CTX_CTX_TIMESTAMP] = ring->mmio_base + 0x3a8;
+ reg_state[CTX_CTX_TIMESTAMP+1] = 0;
+ reg_state[CTX_PDP3_UDW] = GEN8_RING_PDP_UDW(ring, 3);
+ reg_state[CTX_PDP3_LDW] = GEN8_RING_PDP_LDW(ring, 3);
+ reg_state[CTX_PDP2_UDW] = GEN8_RING_PDP_UDW(ring, 2);
+ reg_state[CTX_PDP2_LDW] = GEN8_RING_PDP_LDW(ring, 2);
+ reg_state[CTX_PDP1_UDW] = GEN8_RING_PDP_UDW(ring, 1);
+ reg_state[CTX_PDP1_LDW] = GEN8_RING_PDP_LDW(ring, 1);
+ reg_state[CTX_PDP0_UDW] = GEN8_RING_PDP_UDW(ring, 0);
+ reg_state[CTX_PDP0_LDW] = GEN8_RING_PDP_LDW(ring, 0);
+ reg_state[CTX_PDP3_UDW+1] = upper_32_bits(ppgtt->pd_dma_addr[3]);
+ reg_state[CTX_PDP3_LDW+1] = lower_32_bits(ppgtt->pd_dma_addr[3]);
+ reg_state[CTX_PDP2_UDW+1] = upper_32_bits(ppgtt->pd_dma_addr[2]);
+ reg_state[CTX_PDP2_LDW+1] = lower_32_bits(ppgtt->pd_dma_addr[2]);
+ reg_state[CTX_PDP1_UDW+1] = upper_32_bits(ppgtt->pd_dma_addr[1]);
+ reg_state[CTX_PDP1_LDW+1] = lower_32_bits(ppgtt->pd_dma_addr[1]);
+ reg_state[CTX_PDP0_UDW+1] = upper_32_bits(ppgtt->pd_dma_addr[0]);
+ reg_state[CTX_PDP0_LDW+1] = lower_32_bits(ppgtt->pd_dma_addr[0]);
+ if (ring->id == RCS) {
+ reg_state[CTX_LRI_HEADER_2] = MI_LOAD_REGISTER_IMM(1);
+ reg_state[CTX_R_PWR_CLK_STATE] = 0x20c8;
+ reg_state[CTX_R_PWR_CLK_STATE+1] = 0;
+ }
+
+ kunmap_atomic(reg_state);
+
+ ctx_obj->dirty = 1;
+ set_page_dirty(page);
+ i915_gem_object_unpin_pages(ctx_obj);
+
+ return 0;
+}
+
void intel_lr_context_free(struct intel_context *ctx)
{
int i;
@@ -150,14 +291,24 @@ int intel_lr_context_deferred_create(struct intel_context *ctx,
if (ret) {
DRM_DEBUG_DRIVER("Failed to allocate ringbuffer obj %s: %d\n",
ring->name, ret);
- kfree(ringbuf);
- i915_gem_object_ggtt_unpin(ctx_obj);
- drm_gem_object_unreference(&ctx_obj->base);
- return ret;
+ goto error;
+ }
+
+ ret = populate_lr_context(ctx, ctx_obj, ring, ringbuf);
+ if (ret) {
+ DRM_DEBUG_DRIVER("Failed to populate LRC: %d\n", ret);
+ intel_destroy_ringbuffer_obj(ringbuf);
+ goto error;
}
ctx->engine[ring->id].ringbuf = ringbuf;
ctx->engine[ring->id].state = ctx_obj;
return 0;
+
+error:
+ kfree(ringbuf);
+ i915_gem_object_ggtt_unpin(ctx_obj);
+ drm_gem_object_unreference(&ctx_obj->base);
+ return ret;
}
--
1.7.9.5
More information about the Intel-gfx
mailing list