[Intel-gfx] [PATCH 17/40] drm/i915: Add chv cmnlane power wells

[Imre Deak]

On Sat, 2014-06-28 at 02:04 +0300, ville.syrjala at linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> CHV has two display PHYs so there are also two cmnlane power wells. Add
> the approriate code to power the wells up/down.
> 
> Like on VLV we do the cmnreset assert/deassert and the DPLL refclock
> enabling at approriate times.
> 
> This code actually works on my bsw.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h |  1 +
>  drivers/gpu/drm/i915/intel_pm.c | 89 +++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 90 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index d246609..19e68d6 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -512,6 +512,7 @@ enum punit_power_well {
>  	PUNIT_POWER_WELL_DPIO_TX_C_LANES_23	= 9,
>  	PUNIT_POWER_WELL_DPIO_RX0		= 10,
>  	PUNIT_POWER_WELL_DPIO_RX1		= 11,
> +	PUNIT_POWER_WELL_DPIO_CMN_D		= 12,
>  
>  	PUNIT_POWER_WELL_NUM,
>  };
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index e2b956e..f88490b 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -6200,6 +6200,64 @@ static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
>  	vlv_set_power_well(dev_priv, power_well, false);
>  }
>  
> +static void chv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
> +					   struct i915_power_well *power_well)
> +{
> +	enum dpio_phy phy;
> +
> +	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
> +		     power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
> +
> +	/*
> +	 * Enable the CRI clock source so we can get at the
> +	 * display and the reference clock for VGA
> +	 * hotplug / manual detection.
> +	 */
> +	if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
> +		phy = DPIO_PHY0;
> +		I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
> +			   DPLL_REFA_CLK_ENABLE_VLV);
> +		I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
> +			   DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);

Any reason the two clocks are enabled sequentially? For PHY1 you don't
do this.. In any case:
Reviewed-by: Imre Deak <imre.deak at intel.com>

> +	} else {
> +		phy = DPIO_PHY1;
> +		I915_WRITE(DPLL(PIPE_C), I915_READ(DPLL(PIPE_C)) |
> +			   DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
> +	}
> +	udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
> +	vlv_set_power_well(dev_priv, power_well, true);
> +
> +	/* Poll for phypwrgood signal */
> +	if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & PHY_POWERGOOD(phy), 1))
> +		DRM_ERROR("Display PHY %d is not power up\n", phy);
> +
> +	I915_WRITE(DISPLAY_PHY_CONTROL,
> +		   PHY_COM_LANE_RESET_DEASSERT(phy, I915_READ(DISPLAY_PHY_CONTROL)));
> +}
> +
> +static void chv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
> +					    struct i915_power_well *power_well)
> +{
> +	enum dpio_phy phy;
> +
> +	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC &&
> +		     power_well->data != PUNIT_POWER_WELL_DPIO_CMN_D);
> +
> +	if (power_well->data == PUNIT_POWER_WELL_DPIO_CMN_BC) {
> +		phy = DPIO_PHY0;
> +		assert_pll_disabled(dev_priv, PIPE_A);
> +		assert_pll_disabled(dev_priv, PIPE_B);
> +	} else {
> +		phy = DPIO_PHY1;
> +		assert_pll_disabled(dev_priv, PIPE_C);
> +	}
> +
> +	I915_WRITE(DISPLAY_PHY_CONTROL,
> +		   PHY_COM_LANE_RESET_ASSERT(phy, I915_READ(DISPLAY_PHY_CONTROL)));
> +
> +	vlv_set_power_well(dev_priv, power_well, false);
> +}
> +
>  static void check_power_well_state(struct drm_i915_private *dev_priv,
>  				   struct i915_power_well *power_well)
>  {
> @@ -6369,6 +6427,18 @@ EXPORT_SYMBOL_GPL(i915_release_power_well);
>  	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
>  	BIT(POWER_DOMAIN_INIT))
>  
> +#define CHV_DPIO_CMN_BC_POWER_DOMAINS (		\
> +	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |	\
> +	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |	\
> +	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |	\
> +	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |	\
> +	BIT(POWER_DOMAIN_INIT))
> +
> +#define CHV_DPIO_CMN_D_POWER_DOMAINS (		\
> +	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |	\
> +	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |	\
> +	BIT(POWER_DOMAIN_INIT))
> +
>  static const struct i915_power_well_ops i9xx_always_on_power_well_ops = {
>  	.sync_hw = i9xx_always_on_power_well_noop,
>  	.enable = i9xx_always_on_power_well_noop,
> @@ -6498,6 +6568,13 @@ static struct i915_power_well vlv_power_wells[] = {
>  	},
>  };
>  
> +static const struct i915_power_well_ops chv_dpio_cmn_power_well_ops = {
> +	.sync_hw = vlv_power_well_sync_hw,
> +	.enable = chv_dpio_cmn_power_well_enable,
> +	.disable = chv_dpio_cmn_power_well_disable,
> +	.is_enabled = vlv_power_well_enabled,
> +};
> +
>  static struct i915_power_well chv_power_wells[] = {
>  	{
>  		.name = "always-on",
> @@ -6505,6 +6582,18 @@ static struct i915_power_well chv_power_wells[] = {
>  		.domains = VLV_ALWAYS_ON_POWER_DOMAINS,
>  		.ops = &i9xx_always_on_power_well_ops,
>  	},
> +	{
> +		.name = "dpio-common-bc",
> +		.domains = CHV_DPIO_CMN_BC_POWER_DOMAINS,
> +		.data = PUNIT_POWER_WELL_DPIO_CMN_BC,
> +		.ops = &chv_dpio_cmn_power_well_ops,
> +	},
> +	{
> +		.name = "dpio-common-d",
> +		.domains = CHV_DPIO_CMN_D_POWER_DOMAINS,
> +		.data = PUNIT_POWER_WELL_DPIO_CMN_D,
> +		.ops = &chv_dpio_cmn_power_well_ops,
> +	},
>  };
>  
>  static struct i915_power_well *lookup_power_well(struct drm_i915_private *dev_priv,

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 490 bytes
Desc: This is a digitally signed message part
URL: <http://lists.freedesktop.org/archives/intel-gfx/attachments/20140725/aaaafec9/attachment.sig>