[Intel-gfx] [PATCH 2/6] drm: Refactor setplane to allow internal use (v3)
Matt Roper
matthew.d.roper at intel.com
Tue Jun 10 17:28:09 CEST 2014
Refactor DRM setplane code into a new setplane_internal() function that
takes DRM objects directly as parameters rather than looking them up by
ID. We'll use this in a future patch when we implement legacy cursor
ioctls on top of the universal plane interface.
v3:
- Move integer overflow checking from setplane_internal to setplane
ioctl. The upcoming legacy cursor support via universal planes needs
to maintain current cursor ioctl semantics and not return error for
these extreme values (found via intel-gpu-tools kms_cursor_crc test).
v2:
- Allow planes to be disabled without a valid crtc again (and add
mention of this to setplane's kerneldoc, since it doesn't seem to be
mentioned anywhere else).
- Reformat some parameter line wrap
Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
Signed-off-by: Matt Roper <matthew.d.roper at intel.com>
---
drivers/gpu/drm/drm_crtc.c | 176 ++++++++++++++++++++++++++-------------------
1 file changed, 102 insertions(+), 74 deletions(-)
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 5a88267..27eae03 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -2122,45 +2122,32 @@ out:
return ret;
}
-/**
- * drm_mode_setplane - configure a plane's configuration
- * @dev: DRM device
- * @data: ioctl data*
- * @file_priv: DRM file info
+/*
+ * setplane_internal - setplane handler for internal callers
*
- * Set plane configuration, including placement, fb, scaling, and other factors.
- * Or pass a NULL fb to disable.
+ * Note that we assume an extra reference has already been taken on fb. If the
+ * update fails, this reference will be dropped before return; if it succeeds,
+ * the previous framebuffer (if any) will be unreferenced instead.
*
- * Returns:
- * Zero on success, errno on failure.
+ * src_{x,y,w,h} are provided in 16.16 fixed point format
*/
-int drm_mode_setplane(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
+static int setplane_internal(struct drm_crtc *crtc,
+ struct drm_plane *plane,
+ struct drm_framebuffer *fb,
+ int32_t crtc_x, int32_t crtc_y,
+ uint32_t crtc_w, uint32_t crtc_h,
+ /* src_{x,y,w,h} values are 16.16 fixed point */
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h)
{
- struct drm_mode_set_plane *plane_req = data;
- struct drm_plane *plane;
- struct drm_crtc *crtc;
- struct drm_framebuffer *fb = NULL, *old_fb = NULL;
+ struct drm_device *dev = crtc->dev;
+ struct drm_framebuffer *old_fb = NULL;
int ret = 0;
unsigned int fb_width, fb_height;
int i;
- if (!drm_core_check_feature(dev, DRIVER_MODESET))
- return -EINVAL;
-
- /*
- * First, find the plane, crtc, and fb objects. If not available,
- * we don't bother to call the driver.
- */
- plane = drm_plane_find(dev, plane_req->plane_id);
- if (!plane) {
- DRM_DEBUG_KMS("Unknown plane ID %d\n",
- plane_req->plane_id);
- return -ENOENT;
- }
-
/* No fb means shut it down */
- if (!plane_req->fb_id) {
+ if (!fb) {
drm_modeset_lock_all(dev);
old_fb = plane->fb;
ret = plane->funcs->disable_plane(plane);
@@ -2174,14 +2161,6 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
goto out;
}
- crtc = drm_crtc_find(dev, plane_req->crtc_id);
- if (!crtc) {
- DRM_DEBUG_KMS("Unknown crtc ID %d\n",
- plane_req->crtc_id);
- ret = -ENOENT;
- goto out;
- }
-
/* Check whether this plane is usable on this CRTC */
if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) {
DRM_DEBUG_KMS("Invalid crtc for plane\n");
@@ -2189,14 +2168,6 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
goto out;
}
- fb = drm_framebuffer_lookup(dev, plane_req->fb_id);
- if (!fb) {
- DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",
- plane_req->fb_id);
- ret = -ENOENT;
- goto out;
- }
-
/* Check whether this plane supports the fb pixel format. */
for (i = 0; i < plane->format_count; i++)
if (fb->pixel_format == plane->format_types[i])
@@ -2212,43 +2183,25 @@ int drm_mode_setplane(struct drm_device *dev, void *data,
fb_height = fb->height << 16;
/* Make sure source coordinates are inside the fb. */
- if (plane_req->src_w > fb_width ||
- plane_req->src_x > fb_width - plane_req->src_w ||
- plane_req->src_h > fb_height ||
- plane_req->src_y > fb_height - plane_req->src_h) {
+ if (src_w > fb_width ||
+ src_x > fb_width - src_w ||
+ src_h > fb_height ||
+ src_y > fb_height - src_h) {
DRM_DEBUG_KMS("Invalid source coordinates "
"%u.%06ux%u.%06u+%u.%06u+%u.%06u\n",
- plane_req->src_w >> 16,
- ((plane_req->src_w & 0xffff) * 15625) >> 10,
- plane_req->src_h >> 16,
- ((plane_req->src_h & 0xffff) * 15625) >> 10,
- plane_req->src_x >> 16,
- ((plane_req->src_x & 0xffff) * 15625) >> 10,
- plane_req->src_y >> 16,
- ((plane_req->src_y & 0xffff) * 15625) >> 10);
+ src_w >> 16, ((src_w & 0xffff) * 15625) >> 10,
+ src_h >> 16, ((src_h & 0xffff) * 15625) >> 10,
+ src_x >> 16, ((src_x & 0xffff) * 15625) >> 10,
+ src_y >> 16, ((src_y & 0xffff) * 15625) >> 10);
ret = -ENOSPC;
goto out;
}
- /* Give drivers some help against integer overflows */
- if (plane_req->crtc_w > INT_MAX ||
- plane_req->crtc_x > INT_MAX - (int32_t) plane_req->crtc_w ||
- plane_req->crtc_h > INT_MAX ||
- plane_req->crtc_y > INT_MAX - (int32_t) plane_req->crtc_h) {
- DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
- plane_req->crtc_w, plane_req->crtc_h,
- plane_req->crtc_x, plane_req->crtc_y);
- ret = -ERANGE;
- goto out;
- }
-
drm_modeset_lock_all(dev);
old_fb = plane->fb;
ret = plane->funcs->update_plane(plane, crtc, fb,
- plane_req->crtc_x, plane_req->crtc_y,
- plane_req->crtc_w, plane_req->crtc_h,
- plane_req->src_x, plane_req->src_y,
- plane_req->src_w, plane_req->src_h);
+ crtc_x, crtc_y, crtc_w, crtc_h,
+ src_x, src_y, src_w, src_h);
if (!ret) {
plane->crtc = crtc;
plane->fb = fb;
@@ -2265,6 +2218,81 @@ out:
drm_framebuffer_unreference(old_fb);
return ret;
+
+}
+
+/**
+ * drm_mode_setplane - configure a plane's configuration
+ * @dev: DRM device
+ * @data: ioctl data*
+ * @file_priv: DRM file info
+ *
+ * Set plane configuration, including placement, fb, scaling, and other factors.
+ * Or pass a NULL fb to disable (planes may be disabled without providing a
+ * valid crtc).
+ *
+ * Returns:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_setplane(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_mode_set_plane *plane_req = data;
+ struct drm_mode_object *obj;
+ struct drm_plane *plane;
+ struct drm_crtc *crtc = NULL;
+ struct drm_framebuffer *fb = NULL;
+
+ if (!drm_core_check_feature(dev, DRIVER_MODESET))
+ return -EINVAL;
+
+ /* Give drivers some help against integer overflows */
+ if (plane_req->crtc_w > INT_MAX ||
+ plane_req->crtc_x > INT_MAX - (int32_t) plane_req->crtc_w ||
+ plane_req->crtc_h > INT_MAX ||
+ plane_req->crtc_y > INT_MAX - (int32_t) plane_req->crtc_h) {
+ DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
+ plane_req->crtc_w, plane_req->crtc_h,
+ plane_req->crtc_x, plane_req->crtc_y);
+ return -ERANGE;
+ }
+
+ /*
+ * First, find the plane, crtc, and fb objects. If not available,
+ * we don't bother to call the driver.
+ */
+ obj = drm_mode_object_find(dev, plane_req->plane_id,
+ DRM_MODE_OBJECT_PLANE);
+ if (!obj) {
+ DRM_DEBUG_KMS("Unknown plane ID %d\n",
+ plane_req->plane_id);
+ return -ENOENT;
+ }
+ plane = obj_to_plane(obj);
+
+ if (plane_req->fb_id) {
+ fb = drm_framebuffer_lookup(dev, plane_req->fb_id);
+ if (!fb) {
+ DRM_DEBUG_KMS("Unknown framebuffer ID %d\n",
+ plane_req->fb_id);
+ return -ENOENT;
+ }
+
+ obj = drm_mode_object_find(dev, plane_req->crtc_id,
+ DRM_MODE_OBJECT_CRTC);
+ if (!obj) {
+ DRM_DEBUG_KMS("Unknown crtc ID %d\n",
+ plane_req->crtc_id);
+ return -ENOENT;
+ }
+ crtc = obj_to_crtc(obj);
+ }
+
+ return setplane_internal(crtc, plane, fb,
+ plane_req->crtc_x, plane_req->crtc_y,
+ plane_req->crtc_w, plane_req->crtc_h,
+ plane_req->src_x, plane_req->src_y,
+ plane_req->src_w, plane_req->src_h);
}
/**
--
1.8.5.1
More information about the Intel-gfx
mailing list