[Intel-gfx] [PATCH 1/2] drm/i915: update BDW DDI buffer translations

Paulo Zanoni przanoni at gmail.com
Fri Jun 13 23:45:40 CEST 2014


From: Paulo Zanoni <paulo.r.zanoni at intel.com>

Two BSpec updates changed the recommended values for BDW eDP and DP
DDI buffer translations. Now the signal levels also match the HSW signal
levels, which simplify things a little bit.

It seems some DP sinks don't work properly without voltage level 0 and
pre-emphasis level 3, so this patch may fix some bugs on
panels/monitors that happen on BDW but not on HSW.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h  | 11 --------
 drivers/gpu/drm/i915/intel_ddi.c |  4 +--
 drivers/gpu/drm/i915/intel_dp.c  | 55 +++-------------------------------------
 3 files changed, 5 insertions(+), 65 deletions(-)

This doesn't fix the "eDP 5GHz 2 lanes doesn't work" bug I can reproduce on my
machine if I revert the upstream hack we currently have.

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9ce017b..e1fb0f2 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -5821,7 +5821,6 @@ enum punit_power_well {
 #define DDI_BUF_CTL_B				0x64100
 #define DDI_BUF_CTL(port) _PORT(port, DDI_BUF_CTL_A, DDI_BUF_CTL_B)
 #define  DDI_BUF_CTL_ENABLE			(1<<31)
-/* Haswell */
 #define  DDI_BUF_EMP_400MV_0DB_HSW		(0<<24)   /* Sel0 */
 #define  DDI_BUF_EMP_400MV_3_5DB_HSW		(1<<24)   /* Sel1 */
 #define  DDI_BUF_EMP_400MV_6DB_HSW		(2<<24)   /* Sel2 */
@@ -5831,16 +5830,6 @@ enum punit_power_well {
 #define  DDI_BUF_EMP_600MV_6DB_HSW		(6<<24)   /* Sel6 */
 #define  DDI_BUF_EMP_800MV_0DB_HSW		(7<<24)   /* Sel7 */
 #define  DDI_BUF_EMP_800MV_3_5DB_HSW		(8<<24)   /* Sel8 */
-/* Broadwell */
-#define  DDI_BUF_EMP_400MV_0DB_BDW		(0<<24)   /* Sel0 */
-#define  DDI_BUF_EMP_400MV_3_5DB_BDW		(1<<24)   /* Sel1 */
-#define  DDI_BUF_EMP_400MV_6DB_BDW		(2<<24)   /* Sel2 */
-#define  DDI_BUF_EMP_600MV_0DB_BDW		(3<<24)   /* Sel3 */
-#define  DDI_BUF_EMP_600MV_3_5DB_BDW		(4<<24)   /* Sel4 */
-#define  DDI_BUF_EMP_600MV_6DB_BDW		(5<<24)   /* Sel5 */
-#define  DDI_BUF_EMP_800MV_0DB_BDW		(6<<24)   /* Sel6 */
-#define  DDI_BUF_EMP_800MV_3_5DB_BDW		(7<<24)   /* Sel7 */
-#define  DDI_BUF_EMP_1200MV_0DB_BDW		(8<<24)   /* Sel8 */
 #define  DDI_BUF_EMP_MASK			(0xf<<24)
 #define  DDI_BUF_PORT_REVERSAL			(1<<16)
 #define  DDI_BUF_IS_IDLE			(1<<7)
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index b17b9c7..ded6013 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -76,12 +76,12 @@ static const u32 bdw_ddi_translations_edp[] = {
 	0x00FFFFFF, 0x00000012,		/* eDP parameters */
 	0x00EBAFFF, 0x00020011,
 	0x00C71FFF, 0x0006000F,
+	0x00AAAFFF, 0x000E000A,
 	0x00FFFFFF, 0x00020011,
 	0x00DB6FFF, 0x0005000F,
 	0x00BEEFFF, 0x000A000C,
 	0x00FFFFFF, 0x0005000F,
 	0x00DB6FFF, 0x000A000C,
-	0x00FFFFFF, 0x000A000C,
 	0x00FFFFFF, 0x00140006		/* HDMI parameters 800mV 0dB*/
 };
 
@@ -89,12 +89,12 @@ static const u32 bdw_ddi_translations_dp[] = {
 	0x00FFFFFF, 0x0007000E,		/* DP parameters */
 	0x00D75FFF, 0x000E000A,
 	0x00BEFFFF, 0x00140006,
+	0x80B2CFFF, 0x001B0002,
 	0x00FFFFFF, 0x000E000A,
 	0x00D75FFF, 0x00180004,
 	0x80CB2FFF, 0x001B0002,
 	0x00F7DFFF, 0x00180004,
 	0x80D75FFF, 0x001B0002,
-	0x80FFFFFF, 0x001B0002,
 	0x00FFFFFF, 0x00140006		/* HDMI parameters 800mV 0dB*/
 };
 
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index b6b2640..dc58044 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2330,7 +2330,7 @@ intel_dp_voltage_max(struct intel_dp *intel_dp)
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	enum port port = dp_to_dig_port(intel_dp)->port;
 
-	if (IS_VALLEYVIEW(dev) || IS_BROADWELL(dev))
+	if (IS_VALLEYVIEW(dev))
 		return DP_TRAIN_VOLTAGE_SWING_1200;
 	else if (IS_GEN7(dev) && port == PORT_A)
 		return DP_TRAIN_VOLTAGE_SWING_800;
@@ -2346,18 +2346,7 @@ intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
 	struct drm_device *dev = intel_dp_to_dev(intel_dp);
 	enum port port = dp_to_dig_port(intel_dp)->port;
 
-	if (IS_BROADWELL(dev)) {
-		switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
-		case DP_TRAIN_VOLTAGE_SWING_400:
-		case DP_TRAIN_VOLTAGE_SWING_600:
-			return DP_TRAIN_PRE_EMPHASIS_6;
-		case DP_TRAIN_VOLTAGE_SWING_800:
-			return DP_TRAIN_PRE_EMPHASIS_3_5;
-		case DP_TRAIN_VOLTAGE_SWING_1200:
-		default:
-			return DP_TRAIN_PRE_EMPHASIS_0;
-		}
-	} else if (IS_HASWELL(dev)) {
+	if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
 		case DP_TRAIN_VOLTAGE_SWING_400:
 			return DP_TRAIN_PRE_EMPHASIS_9_5;
@@ -2829,41 +2818,6 @@ intel_hsw_signal_levels(uint8_t train_set)
 	}
 }
 
-static uint32_t
-intel_bdw_signal_levels(uint8_t train_set)
-{
-	int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
-					 DP_TRAIN_PRE_EMPHASIS_MASK);
-	switch (signal_levels) {
-	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
-		return DDI_BUF_EMP_400MV_0DB_BDW;	/* Sel0 */
-	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5:
-		return DDI_BUF_EMP_400MV_3_5DB_BDW;	/* Sel1 */
-	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
-		return DDI_BUF_EMP_400MV_6DB_BDW;	/* Sel2 */
-
-	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0:
-		return DDI_BUF_EMP_600MV_0DB_BDW;	/* Sel3 */
-	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
-		return DDI_BUF_EMP_600MV_3_5DB_BDW;	/* Sel4 */
-	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_6:
-		return DDI_BUF_EMP_600MV_6DB_BDW;	/* Sel5 */
-
-	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
-		return DDI_BUF_EMP_800MV_0DB_BDW;	/* Sel6 */
-	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5:
-		return DDI_BUF_EMP_800MV_3_5DB_BDW;	/* Sel7 */
-
-	case DP_TRAIN_VOLTAGE_SWING_1200 | DP_TRAIN_PRE_EMPHASIS_0:
-		return DDI_BUF_EMP_1200MV_0DB_BDW;	/* Sel8 */
-
-	default:
-		DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
-			      "0x%x\n", signal_levels);
-		return DDI_BUF_EMP_400MV_0DB_BDW;	/* Sel0 */
-	}
-}
-
 /* Properly updates "DP" with the correct signal levels. */
 static void
 intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
@@ -2874,10 +2828,7 @@ intel_dp_set_signal_levels(struct intel_dp *intel_dp, uint32_t *DP)
 	uint32_t signal_levels, mask;
 	uint8_t train_set = intel_dp->train_set[0];
 
-	if (IS_BROADWELL(dev)) {
-		signal_levels = intel_bdw_signal_levels(train_set);
-		mask = DDI_BUF_EMP_MASK;
-	} else if (IS_HASWELL(dev)) {
+	if (IS_HASWELL(dev) || IS_BROADWELL(dev)) {
 		signal_levels = intel_hsw_signal_levels(train_set);
 		mask = DDI_BUF_EMP_MASK;
 	} else if (IS_CHERRYVIEW(dev)) {
-- 
2.0.0




More information about the Intel-gfx mailing list