[Intel-gfx] [PATCH v3 2/4] drm/i915/vlv: Ack interrupts before handling them (VLV)

oscar.mateo at intel.com oscar.mateo at intel.com
Mon Jun 16 17:10:58 CEST 2014


From: Oscar Mateo <oscar.mateo at intel.com>

Otherwise, we might receive a new interrupt before we have time to
ack the first one, eventually missing it.

Without an atomic XCHG operation with mmio space, this patch merely
reduces the window in which we can miss an interrupt (especially when
you consider how heavyweight the I915_READ/I915_WRITE operations are).

Notice that, before clearing a port-sourced interrupt in the IIR, the
corresponding interrupt source status in the PORT_HOTPLUG_STAT must be
cleared.

Spotted by Bob Beckett <robert.beckett at intel.com>.

v2:
- Reorder the IIR clearing to reduce the window even further.
- Add warning to commit message and comments to the code as per Chris
  Wilson's request.
- Imre Deak pointed out that the pipe underrun flag might not be signaled
  in IIR, so do not make valleyview_pipestat_irq_handler depend on it.

v3: Improve the source code comment.

Signed-off-by: Oscar Mateo <oscar.mateo at intel.com>
---
 drivers/gpu/drm/i915/i915_irq.c | 67 +++++++++++++++++++++++------------------
 1 file changed, 38 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index a68f68c..20f7c05 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1813,26 +1813,28 @@ static void i9xx_hpd_irq_handler(struct drm_device *dev)
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
 
-	if (IS_G4X(dev)) {
-		u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_G4X;
+	if (hotplug_status) {
+		I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
+		/*
+		 * Make sure hotplug status is cleared before we clear IIR, or else we
+		 * may miss hotplug events.
+		 */
+		POSTING_READ(PORT_HOTPLUG_STAT);
 
-		intel_hpd_irq_handler(dev, hotplug_trigger, hpd_status_g4x);
-	} else {
-		u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915;
+		if (IS_G4X(dev)) {
+			u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_G4X;
 
-		intel_hpd_irq_handler(dev, hotplug_trigger, hpd_status_i915);
-	}
+			intel_hpd_irq_handler(dev, hotplug_trigger, hpd_status_g4x);
+		} else {
+			u32 hotplug_trigger = hotplug_status & HOTPLUG_INT_STATUS_I915;
 
-	if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) &&
-	    hotplug_status & DP_AUX_CHANNEL_MASK_INT_STATUS_G4X)
-		dp_aux_irq_handler(dev);
+			intel_hpd_irq_handler(dev, hotplug_trigger, hpd_status_i915);
+		}
 
-	I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
-	/*
-	 * Make sure hotplug status is cleared before we clear IIR, or else we
-	 * may miss hotplug events.
-	 */
-	POSTING_READ(PORT_HOTPLUG_STAT);
+		if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) &&
+		    hotplug_status & DP_AUX_CHANNEL_MASK_INT_STATUS_G4X)
+			dp_aux_irq_handler(dev);
+	}
 }
 
 static irqreturn_t valleyview_irq_handler(int irq, void *arg)
@@ -1843,29 +1845,36 @@ static irqreturn_t valleyview_irq_handler(int irq, void *arg)
 	irqreturn_t ret = IRQ_NONE;
 
 	while (true) {
-		iir = I915_READ(VLV_IIR);
+		/* Find, clear, then process each source of interrupt */
+
 		gt_iir = I915_READ(GTIIR);
+		if (gt_iir)
+			I915_WRITE(GTIIR, gt_iir);
+
 		pm_iir = I915_READ(GEN6_PMIIR);
+		if (pm_iir)
+			I915_WRITE(GEN6_PMIIR, pm_iir);
+
+		iir = I915_READ(VLV_IIR);
+		if (iir) {
+			/* Consume port before clearing IIR or we'll miss events */
+			if (iir & I915_DISPLAY_PORT_INTERRUPT)
+				i9xx_hpd_irq_handler(dev);
+			I915_WRITE(VLV_IIR, iir);
+		}
 
 		if (gt_iir == 0 && pm_iir == 0 && iir == 0)
 			goto out;
 
 		ret = IRQ_HANDLED;
 
-		snb_gt_irq_handler(dev, dev_priv, gt_iir);
-
-		valleyview_pipestat_irq_handler(dev, iir);
-
-		/* Consume port.  Then clear IIR or we'll miss events */
-		if (iir & I915_DISPLAY_PORT_INTERRUPT)
-			i9xx_hpd_irq_handler(dev);
-
+		if (gt_iir)
+			snb_gt_irq_handler(dev, dev_priv, gt_iir);
 		if (pm_iir)
 			gen6_rps_irq_handler(dev_priv, pm_iir);
-
-		I915_WRITE(GTIIR, gt_iir);
-		I915_WRITE(GEN6_PMIIR, pm_iir);
-		I915_WRITE(VLV_IIR, iir);
+		/* Call regardless, as some status bits might not be
+		 * signalled in iir */
+		valleyview_pipestat_irq_handler(dev, iir);
 	}
 
 out:
-- 
1.9.0




More information about the Intel-gfx mailing list