[Intel-gfx] [PATCH 07/11] drm/i915: Add 180 degree sprite rotation support

sonika.jindal at intel.com sonika.jindal at intel.com
Wed Jun 18 10:57:23 CEST 2014


From: Ville Syrjälä <ville.syrjala at linux.intel.com>

The sprite planes (in fact all display planes starting from gen4)
support 180 degree rotation. Add the relevant low level bits to the
sprite code to make use of that feature.

The upper layers are not yet plugged in.

v2: HSW handles the rotated buffer offset automagically

v3: BDW also handles the rotated buffer offset automagically

Testcase: igt/kms_rotation_crc

Cc: Daniel Vetter <daniel.vetter at ffwll.ch>
Cc: Jani Nikula <jani.nikula at linux.intel.com>
Cc: David Airlie <airlied at linux.ie>
Cc: dri-devel at lists.freedesktop.org
Cc: linux-kernel at vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Sagar Kamble <sagar.a.kamble at intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h     |    3 +++
 drivers/gpu/drm/i915/intel_drv.h    |    1 +
 drivers/gpu/drm/i915/intel_sprite.c |   37 +++++++++++++++++++++++++++++++++++
 3 files changed, 41 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3488567..c70c804 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4171,6 +4171,7 @@ enum punit_power_well {
 #define   DVS_YUV_ORDER_UYVY	(1<<16)
 #define   DVS_YUV_ORDER_YVYU	(2<<16)
 #define   DVS_YUV_ORDER_VYUY	(3<<16)
+#define   DVS_ROTATE_180	(1<<15)
 #define   DVS_DEST_KEY		(1<<2)
 #define   DVS_TRICKLE_FEED_DISABLE (1<<14)
 #define   DVS_TILED		(1<<10)
@@ -4241,6 +4242,7 @@ enum punit_power_well {
 #define   SPRITE_YUV_ORDER_UYVY		(1<<16)
 #define   SPRITE_YUV_ORDER_YVYU		(2<<16)
 #define   SPRITE_YUV_ORDER_VYUY		(3<<16)
+#define   SPRITE_ROTATE_180		(1<<15)
 #define   SPRITE_TRICKLE_FEED_DISABLE	(1<<14)
 #define   SPRITE_INT_GAMMA_ENABLE	(1<<13)
 #define   SPRITE_TILED			(1<<10)
@@ -4314,6 +4316,7 @@ enum punit_power_well {
 #define   SP_YUV_ORDER_UYVY		(1<<16)
 #define   SP_YUV_ORDER_YVYU		(2<<16)
 #define   SP_YUV_ORDER_VYUY		(3<<16)
+#define   SP_ROTATE_180			(1<<15)
 #define   SP_TILED			(1<<10)
 #define _SPALINOFF		(VLV_DISPLAY_BASE + 0x72184)
 #define _SPASTRIDE		(VLV_DISPLAY_BASE + 0x72188)
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index ab5962b..67b1c59 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -437,6 +437,7 @@ struct intel_plane {
 	unsigned int crtc_w, crtc_h;
 	uint32_t src_x, src_y;
 	uint32_t src_w, src_h;
+	unsigned int rotation;
 
 	/* Since we need to change the watermarks before/after
 	 * enabling/disabling the planes, we need to store the parameters here
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 404335d..54d4224 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -163,6 +163,7 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 	sprctl &= ~SP_PIXFORMAT_MASK;
 	sprctl &= ~SP_YUV_BYTE_ORDER_MASK;
 	sprctl &= ~SP_TILED;
+	sprctl &= ~SP_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_YUYV:
@@ -234,6 +235,14 @@ vlv_update_plane(struct drm_plane *dplane, struct drm_crtc *crtc,
 							fb->pitches[0]);
 	linear_offset -= sprsurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		sprctl |= SP_ROTATE_180;
+
+		x += src_w;
+		y += src_h;
+		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+	}
+
 	atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
 
 	intel_update_primary_plane(intel_crtc);
@@ -363,6 +372,7 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	sprctl &= ~SPRITE_RGB_ORDER_RGBX;
 	sprctl &= ~SPRITE_YUV_BYTE_ORDER_MASK;
 	sprctl &= ~SPRITE_TILED;
+	sprctl &= ~SPRITE_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
@@ -424,6 +434,17 @@ ivb_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 					       pixel_size, fb->pitches[0]);
 	linear_offset -= sprsurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		sprctl |= SPRITE_ROTATE_180;
+
+		/* HSW and BDW does this automagically in hardware */
+		if (!IS_HASWELL(dev) && !IS_BROADWELL(dev)) {
+			x += src_w;
+			y += src_h;
+			linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+		}
+	}
+
 	atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
 
 	intel_update_primary_plane(intel_crtc);
@@ -569,6 +590,7 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	dvscntr &= ~DVS_RGB_ORDER_XBGR;
 	dvscntr &= ~DVS_YUV_BYTE_ORDER_MASK;
 	dvscntr &= ~DVS_TILED;
+	dvscntr &= ~DVS_ROTATE_180;
 
 	switch (fb->pixel_format) {
 	case DRM_FORMAT_XBGR8888:
@@ -625,6 +647,14 @@ ilk_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 					       pixel_size, fb->pitches[0]);
 	linear_offset -= dvssurf_offset;
 
+	if (intel_plane->rotation == BIT(DRM_ROTATE_180)) {
+		dvscntr |= DVS_ROTATE_180;
+
+		x += src_w;
+		y += src_h;
+		linear_offset += src_h * fb->pitches[0] + src_w * pixel_size;
+	}
+
 	atomic_update = intel_pipe_update_start(intel_crtc, &start_vbl_count);
 
 	intel_update_primary_plane(intel_crtc);
@@ -883,6 +913,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 	max_scale = intel_plane->max_downscale << 16;
 	min_scale = intel_plane->can_scale ? 1 : (1 << 16);
 
+	drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
+			intel_plane->rotation);
+
 	hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
 	BUG_ON(hscale < 0);
 
@@ -921,6 +954,9 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
 				     drm_rect_width(&dst) * hscale - drm_rect_width(&src),
 				     drm_rect_height(&dst) * vscale - drm_rect_height(&src));
 
+		drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
+				    intel_plane->rotation);
+
 		/* sanity check to make sure the src viewport wasn't enlarged */
 		WARN_ON(src.x1 < (int) src_x ||
 			src.y1 < (int) src_y ||
@@ -1296,6 +1332,7 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe, int plane)
 
 	intel_plane->pipe = pipe;
 	intel_plane->plane = plane;
+	intel_plane->rotation = BIT(DRM_ROTATE_0);
 	possible_crtcs = (1 << pipe);
 	ret = drm_plane_init(dev, &intel_plane->base, possible_crtcs,
 			     &intel_plane_funcs,
-- 
1.7.10.4




More information about the Intel-gfx mailing list