[Intel-gfx] [PATCH 09/11] drm/i915: Pull the cmnlane tricks into its own power well ops

Jesse Barnes jbarnes at virtuousgeek.org
Wed Jun 25 20:59:38 CEST 2014


On Fri, 13 Jun 2014 13:37:55 +0300
ville.syrjala at linux.intel.com wrote:

> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> 
> Remove the clutter in __vlv_set_power_well() by moving the cmnlane
> handling into custom enable/disable hooks for the cmnlane.
> 
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/intel_pm.c | 92 ++++++++++++++++++++++++-----------------
>  1 file changed, 55 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 9d7b082..e9a8565 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -5965,31 +5965,9 @@ static bool i9xx_always_on_power_well_enabled(struct drm_i915_private *dev_priv,
>  void __vlv_set_power_well(struct drm_i915_private *dev_priv,
>  			  enum punit_power_well power_well_id, bool enable)
>  {
> -	struct drm_device *dev = dev_priv->dev;
>  	u32 mask;
>  	u32 state;
>  	u32 ctrl;
> -	enum pipe pipe;
> -
> -	if (power_well_id == PUNIT_POWER_WELL_DPIO_CMN_BC) {
> -		if (enable) {
> -			/*
> -			 * Enable the CRI clock source so we can get at the
> -			 * display and the reference clock for VGA
> -			 * hotplug / manual detection.
> -			 */
> -			I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
> -				   DPLL_REFA_CLK_ENABLE_VLV |
> -				   DPLL_INTEGRATED_CRI_CLK_VLV);
> -			udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
> -		} else {
> -			for_each_pipe(pipe)
> -				assert_pll_disabled(dev_priv, pipe);
> -			/* Assert common reset */
> -			I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) &
> -				   ~DPIO_CMNRST);
> -		}
> -	}
>  
>  	mask = PUNIT_PWRGT_MASK(power_well_id);
>  	state = enable ? PUNIT_PWRGT_PWR_ON(power_well_id) :
> @@ -6017,20 +5995,6 @@ void __vlv_set_power_well(struct drm_i915_private *dev_priv,
>  
>  out:
>  	mutex_unlock(&dev_priv->rps.hw_lock);
> -
> -	/*
> -	 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
> -	 *  6.	De-assert cmn_reset/side_reset. Same as VLV X0.
> -	 *   a.	GUnit 0x2110 bit[0] set to 1 (def 0)
> -	 *   b.	The other bits such as sfr settings / modesel may all
> -	 *	be set to 0.
> -	 *
> -	 * This should only be done on init and resume from S3 with
> -	 * both PLLs disabled, or we risk losing DPIO and PLL
> -	 * synchronization.
> -	 */
> -	if (power_well_id == PUNIT_POWER_WELL_DPIO_CMN_BC && enable)
> -		I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
>  }
>  
>  static void vlv_set_power_well(struct drm_i915_private *dev_priv,
> @@ -6130,6 +6094,53 @@ static void vlv_display_power_well_disable(struct drm_i915_private *dev_priv,
>  	vlv_set_power_well(dev_priv, power_well, false);
>  }
>  
> +static void vlv_dpio_cmn_power_well_enable(struct drm_i915_private *dev_priv,
> +					   struct i915_power_well *power_well)
> +{
> +	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
> +
> +	/*
> +	 * Enable the CRI clock source so we can get at the
> +	 * display and the reference clock for VGA
> +	 * hotplug / manual detection.
> +	 */
> +	I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) |
> +		   DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV);
> +	udelay(1); /* >10ns for cmnreset, >0ns for sidereset */
> +
> +	vlv_set_power_well(dev_priv, power_well, true);
> +
> +	/*
> +	 * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
> +	 *  6.	De-assert cmn_reset/side_reset. Same as VLV X0.
> +	 *   a.	GUnit 0x2110 bit[0] set to 1 (def 0)
> +	 *   b.	The other bits such as sfr settings / modesel may all
> +	 *	be set to 0.
> +	 *
> +	 * This should only be done on init and resume from S3 with
> +	 * both PLLs disabled, or we risk losing DPIO and PLL
> +	 * synchronization.
> +	 */
> +	I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
> +}
> +
> +static void vlv_dpio_cmn_power_well_disable(struct drm_i915_private *dev_priv,
> +					    struct i915_power_well *power_well)
> +{
> +	struct drm_device *dev = dev_priv->dev;
> +	enum pipe pipe;
> +
> +	WARN_ON_ONCE(power_well->data != PUNIT_POWER_WELL_DPIO_CMN_BC);
> +
> +	for_each_pipe(pipe)
> +		assert_pll_disabled(dev_priv, pipe);
> +
> +	/* Assert common reset */
> +	I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) & ~DPIO_CMNRST);
> +
> +	vlv_set_power_well(dev_priv, power_well, false);
> +}
> +
>  static void check_power_well_state(struct drm_i915_private *dev_priv,
>  				   struct i915_power_well *power_well)
>  {
> @@ -6353,6 +6364,13 @@ static const struct i915_power_well_ops vlv_display_power_well_ops = {
>  	.is_enabled = vlv_power_well_enabled,
>  };
>  
> +static const struct i915_power_well_ops vlv_dpio_cmn_power_well_ops = {
> +	.sync_hw = vlv_power_well_sync_hw,
> +	.enable = vlv_dpio_cmn_power_well_enable,
> +	.disable = vlv_dpio_cmn_power_well_disable,
> +	.is_enabled = vlv_power_well_enabled,
> +};
> +
>  static const struct i915_power_well_ops vlv_dpio_power_well_ops = {
>  	.sync_hw = vlv_power_well_sync_hw,
>  	.enable = vlv_power_well_enable,
> @@ -6413,7 +6431,7 @@ static struct i915_power_well vlv_power_wells[] = {
>  		.name = "dpio-common",
>  		.domains = VLV_DPIO_CMN_BC_POWER_DOMAINS,
>  		.data = PUNIT_POWER_WELL_DPIO_CMN_BC,
> -		.ops = &vlv_dpio_power_well_ops,
> +		.ops = &vlv_dpio_cmn_power_well_ops,
>  	},
>  };
>  

Reviewed-by: Jesse Barnes <jbarnes at virtuousgeek.org>

-- 
Jesse Barnes, Intel Open Source Technology Center



More information about the Intel-gfx mailing list