[Intel-gfx] [PATCH 02/19] drm/i915: Remove spll_refcount for hsw
Imre Deak
imre.deak at intel.com
Wed Jun 25 21:01:47 CEST 2014
From: Daniel Vetter <daniel.vetter at ffwll.ch>
SPLL would be a reference clock we could potentially share,
especially if we want to use the SSC mode. But currently we
don't, so let's rip out this complexity for a simpler conversion
to the new display pll framework.
Signed-off-by: Daniel Vetter <daniel.vetter at ffwll.ch>
---
drivers/gpu/drm/i915/i915_drv.h | 1 -
drivers/gpu/drm/i915/intel_ddi.c | 41 +++++++++++++---------------------------
2 files changed, 13 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 8cea596..bdc578b 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -229,7 +229,6 @@ void intel_link_compute_m_n(int bpp, int nlanes,
struct intel_link_m_n *m_n);
struct intel_ddi_plls {
- int spll_refcount;
int wrpll1_refcount;
int wrpll2_refcount;
};
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index ded6013..9f02281 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -394,14 +394,11 @@ void intel_ddi_put_crtc_pll(struct drm_crtc *crtc)
switch (intel_crtc->ddi_pll_sel) {
case PORT_CLK_SEL_SPLL:
- plls->spll_refcount--;
- if (plls->spll_refcount == 0) {
- DRM_DEBUG_KMS("Disabling SPLL\n");
- val = I915_READ(SPLL_CTL);
- WARN_ON(!(val & SPLL_PLL_ENABLE));
- I915_WRITE(SPLL_CTL, val & ~SPLL_PLL_ENABLE);
- POSTING_READ(SPLL_CTL);
- }
+ DRM_DEBUG_KMS("Disabling SPLL\n");
+ val = I915_READ(SPLL_CTL);
+ WARN_ON(!(val & SPLL_PLL_ENABLE));
+ I915_WRITE(SPLL_CTL, val & ~SPLL_PLL_ENABLE);
+ POSTING_READ(SPLL_CTL);
break;
case PORT_CLK_SEL_WRPLL1:
plls->wrpll1_refcount--;
@@ -425,7 +422,6 @@ void intel_ddi_put_crtc_pll(struct drm_crtc *crtc)
break;
}
- WARN(plls->spll_refcount < 0, "Invalid SPLL refcount\n");
WARN(plls->wrpll1_refcount < 0, "Invalid WRPLL1 refcount\n");
WARN(plls->wrpll2_refcount < 0, "Invalid WRPLL2 refcount\n");
@@ -821,16 +817,9 @@ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc)
}
} else if (type == INTEL_OUTPUT_ANALOG) {
- if (plls->spll_refcount == 0) {
- DRM_DEBUG_KMS("Using SPLL on pipe %c\n",
- pipe_name(pipe));
- plls->spll_refcount++;
- intel_crtc->ddi_pll_sel = PORT_CLK_SEL_SPLL;
- } else {
- DRM_ERROR("SPLL already in use\n");
- return false;
- }
-
+ DRM_DEBUG_KMS("Using SPLL on pipe %c\n",
+ pipe_name(pipe));
+ intel_crtc->ddi_pll_sel = PORT_CLK_SEL_SPLL;
} else {
WARN(1, "Invalid DDI encoder type %d\n", type);
return false;
@@ -869,13 +858,13 @@ void intel_ddi_pll_enable(struct intel_crtc *crtc)
return;
case PORT_CLK_SEL_SPLL:
- pll_name = "SPLL";
- reg = SPLL_CTL;
- refcount = plls->spll_refcount;
new_val = SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz |
SPLL_PLL_SSC;
- break;
-
+ WARN(I915_READ(SPLL_CTL) & enable_bit, "SPLL already enabled\n");
+ I915_WRITE(SPLL_CTL, new_val);
+ POSTING_READ(SPLL_CTL);
+ udelay(20);
+ return;
case PORT_CLK_SEL_WRPLL1:
case PORT_CLK_SEL_WRPLL2:
if (crtc->ddi_pll_sel == PORT_CLK_SEL_WRPLL1) {
@@ -1186,7 +1175,6 @@ void intel_ddi_setup_hw_pll_state(struct drm_device *dev)
enum pipe pipe;
struct intel_crtc *intel_crtc;
- dev_priv->ddi_plls.spll_refcount = 0;
dev_priv->ddi_plls.wrpll1_refcount = 0;
dev_priv->ddi_plls.wrpll2_refcount = 0;
@@ -1203,9 +1191,6 @@ void intel_ddi_setup_hw_pll_state(struct drm_device *dev)
pipe);
switch (intel_crtc->ddi_pll_sel) {
- case PORT_CLK_SEL_SPLL:
- dev_priv->ddi_plls.spll_refcount++;
- break;
case PORT_CLK_SEL_WRPLL1:
dev_priv->ddi_plls.wrpll1_refcount++;
break;
--
1.8.4
More information about the Intel-gfx
mailing list