[Intel-gfx] [PATCH 18/40] drm/i915: Kill intel_reset_dpio()

[ville.syrjala at linux.intel.com]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Both VLV and CHV handle the cmnreset stuff in the power well code now,
so intel_reset_dpio() is no longer needed.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/intel_display.c | 31 -------------------------------
 1 file changed, 31 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index a16f635..3cd73f4 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1511,34 +1511,6 @@ static void intel_init_dpio(struct drm_device *dev)
 	}
 }
 
-static void intel_reset_dpio(struct drm_device *dev)
-{
-	struct drm_i915_private *dev_priv = dev->dev_private;
-
-	if (IS_CHERRYVIEW(dev)) {
-		enum dpio_phy phy;
-		u32 val;
-
-		for (phy = DPIO_PHY0; phy < I915_NUM_PHYS_VLV; phy++) {
-			/* Poll for phypwrgood signal */
-			if (wait_for(I915_READ(DISPLAY_PHY_STATUS) &
-						PHY_POWERGOOD(phy), 1))
-				DRM_ERROR("Display PHY %d is not power up\n", phy);
-
-			/*
-			 * Deassert common lane reset for PHY.
-			 *
-			 * This should only be done on init and resume from S3
-			 * with both PLLs disabled, or we risk losing DPIO and
-			 * PLL synchronization.
-			 */
-			val = I915_READ(DISPLAY_PHY_CONTROL);
-			I915_WRITE(DISPLAY_PHY_CONTROL,
-				PHY_COM_LANE_RESET_DEASSERT(phy, val));
-		}
-	}
-}
-
 static void vlv_enable_pll(struct intel_crtc *crtc)
 {
 	struct drm_device *dev = crtc->base.dev;
@@ -12473,8 +12445,6 @@ void intel_modeset_init_hw(struct drm_device *dev)
 
 	intel_init_clock_gating(dev);
 
-	intel_reset_dpio(dev);
-
 	intel_enable_gt_powersave(dev);
 }
 
@@ -12545,7 +12515,6 @@ void intel_modeset_init(struct drm_device *dev)
 	}
 
 	intel_init_dpio(dev);
-	intel_reset_dpio(dev);
 
 	intel_cpu_pll_init(dev);
 	intel_shared_dpll_init(dev);
-- 
1.8.5.5