[Intel-gfx] [PATCH 3/5] drm/i915: Replace a few for_each_pipe(i) by for_each_pipe(pipe)
Damien Lespiau
damien.lespiau at intel.com
Mon Mar 3 18:31:46 CET 2014
Consistency throughout the code base is good and remove some room for
mistakes (as explained in the "drm/i915: Use a pipe variable to cycle
through the pipes" commit)
So, let's replace the for_each_pipe(i) occurences by for_each_pipe(pipe)
when it's reasonable and practical to do so (eg. when there isn't another
pipe variable already).
Suggested-by: Chris Wilson <chris at chris-wilson.co.uk>
Signed-off-by: Damien Lespiau <damien.lespiau at intel.com>
---
drivers/gpu/drm/i915/i915_debugfs.c | 14 +++++++-------
drivers/gpu/drm/i915/i915_irq.c | 14 +++++++-------
drivers/gpu/drm/i915/intel_pm.c | 16 ++++++++--------
3 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index d247926..99d48ec 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -614,16 +614,16 @@ static int i915_interrupt_info(struct seq_file *m, void *data)
i, I915_READ(GEN8_GT_IER(i)));
}
- for_each_pipe(i) {
+ for_each_pipe(pipe) {
seq_printf(m, "Pipe %c IMR:\t%08x\n",
- pipe_name(i),
- I915_READ(GEN8_DE_PIPE_IMR(i)));
+ pipe_name(pipe),
+ I915_READ(GEN8_DE_PIPE_IMR(pipe)));
seq_printf(m, "Pipe %c IIR:\t%08x\n",
- pipe_name(i),
- I915_READ(GEN8_DE_PIPE_IIR(i)));
+ pipe_name(pipe),
+ I915_READ(GEN8_DE_PIPE_IIR(pipe)));
seq_printf(m, "Pipe %c IER:\t%08x\n",
- pipe_name(i),
- I915_READ(GEN8_DE_PIPE_IER(i)));
+ pipe_name(pipe),
+ I915_READ(GEN8_DE_PIPE_IER(pipe)));
}
seq_printf(m, "Display Engine port interrupt mask:\t%08x\n",
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index f68aee3..44fca75 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1865,7 +1865,7 @@ static void ilk_display_irq_handler(struct drm_device *dev, u32 de_iir)
static void ivb_display_irq_handler(struct drm_device *dev, u32 de_iir)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- enum pipe i;
+ enum pipe pipe;
if (de_iir & DE_ERR_INT_IVB)
ivb_err_int_handler(dev);
@@ -1876,14 +1876,14 @@ static void ivb_display_irq_handler(struct drm_device *dev, u32 de_iir)
if (de_iir & DE_GSE_IVB)
intel_opregion_asle_intr(dev);
- for_each_pipe(i) {
- if (de_iir & (DE_PIPE_VBLANK_IVB(i)))
- drm_handle_vblank(dev, i);
+ for_each_pipe(pipe) {
+ if (de_iir & (DE_PIPE_VBLANK_IVB(pipe)))
+ drm_handle_vblank(dev, pipe);
/* plane/pipes map 1:1 on ilk+ */
- if (de_iir & DE_PLANE_FLIP_DONE_IVB(i)) {
- intel_prepare_page_flip(dev, i);
- intel_finish_page_flip_plane(dev, i);
+ if (de_iir & DE_PLANE_FLIP_DONE_IVB(pipe)) {
+ intel_prepare_page_flip(dev, pipe);
+ intel_finish_page_flip_plane(dev, pipe);
}
}
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index c8347ae..007bf76 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -4788,7 +4788,7 @@ static void lpt_suspend_hw(struct drm_device *dev)
static void gen8_init_clock_gating(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- enum pipe i;
+ enum pipe pipe;
I915_WRITE(WM3_LP_ILK, 0);
I915_WRITE(WM2_LP_ILK, 0);
@@ -4824,9 +4824,9 @@ static void gen8_init_clock_gating(struct drm_device *dev)
I915_READ(CHICKEN_PAR1_1) | DPA_MASK_VBLANK_SRD);
/* WaPsrDPRSUnmaskVBlankInSRD:bdw */
- for_each_pipe(i) {
- I915_WRITE(CHICKEN_PIPESL_1(i),
- I915_READ(CHICKEN_PIPESL_1(i) |
+ for_each_pipe(pipe) {
+ I915_WRITE(CHICKEN_PIPESL_1(pipe),
+ I915_READ(CHICKEN_PIPESL_1(pipe) |
DPRS_MASK_VBLANK_SRD));
}
@@ -5256,7 +5256,7 @@ static void hsw_power_well_post_enable(struct drm_i915_private *dev_priv)
static void hsw_power_well_post_disable(struct drm_i915_private *dev_priv)
{
struct drm_device *dev = dev_priv->dev;
- enum pipe p;
+ enum pipe pipe;
unsigned long irqflags;
/*
@@ -5267,9 +5267,9 @@ static void hsw_power_well_post_disable(struct drm_i915_private *dev_priv)
* FIXME: Should we do this in general in drm_vblank_post_modeset?
*/
spin_lock_irqsave(&dev->vbl_lock, irqflags);
- for_each_pipe(p)
- if (p != PIPE_A)
- dev->vblank[p].last = 0;
+ for_each_pipe(pipe)
+ if (pipe != PIPE_A)
+ dev->vblank[pipe].last = 0;
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}
--
1.8.3.1
More information about the Intel-gfx
mailing list