[Intel-gfx] [PATCH 3/9] drm/i915: make crtc enable/disable asynchronous

[Jesse Barnes]

On Fri,  7 Feb 2014 18:37:01 -0200
Rodrigo Vivi <rodrigo.vivi at gmail.com> wrote:

> From: Jesse Barnes <jbarnes at virtuousgeek.org>
> 
> The intent is to get back to userspace as quickly as possible so it can
> start doing drawing or whatever.  It should also allow our
> suspend/resume/init time to improve a lot.
> 
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi at gmail.com>
> ---
>  drivers/gpu/drm/i915/i915_irq.c      | 10 +++++++++-
>  drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++-------
>  drivers/gpu/drm/i915/intel_drv.h     |  4 ++++
>  3 files changed, 33 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index e9c94c9..749c20f 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -917,8 +917,16 @@ static void i915_hotplug_work_func(struct work_struct *work)
>  		intel_connector = to_intel_connector(connector);
>  		intel_encoder = intel_connector->encoder;
>  		if (hpd_event_bits & (1 << intel_encoder->hpd_pin)) {
> -			if (intel_encoder->hot_plug)
> +			if (intel_encoder->hot_plug) {
> +				struct drm_crtc *crtc =
> +					intel_encoder->base.crtc;
> +				if (crtc) {
> +					mutex_lock(&crtc->mutex);
> +					intel_sync_crtc(intel_encoder->base.crtc);
> +					mutex_unlock(&crtc->mutex);
> +				}
>  				intel_encoder->hot_plug(intel_encoder);
> +			}
>  			if (intel_hpd_irq_event(dev, connector))
>  				changed = true;
>  		}
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 21a950d..6ecd9da 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -1746,6 +1746,11 @@ static void intel_crtc_disable_work(struct work_struct *work)
>  {
>  	struct intel_crtc *intel_crtc = container_of(work, struct intel_crtc,
>  						     disable_work);
> +	struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
> +
> +	mutex_lock(&intel_crtc->base.mutex);
> +	dev_priv->display._crtc_disable(&intel_crtc->base);
> +	mutex_unlock(&intel_crtc->base.mutex);
>  }
>  
>  void intel_queue_crtc_disable(struct drm_crtc *crtc)
> @@ -1761,6 +1766,11 @@ static void intel_crtc_enable_work(struct work_struct *work)
>  {
>  	struct intel_crtc *intel_crtc = container_of(work, struct intel_crtc,
>  						     enable_work);
> +	struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
> +
> +	mutex_lock(&intel_crtc->base.mutex);
> +	dev_priv->display._crtc_enable(&intel_crtc->base);
> +	mutex_unlock(&intel_crtc->base.mutex);
>  }
>  
>  static void intel_queue_crtc_enable(struct drm_crtc *crtc)
> @@ -1772,14 +1782,16 @@ static void intel_queue_crtc_enable(struct drm_crtc *crtc)
>  	queue_work(dev_priv->wq, &intel_crtc->enable_work);
>  }
>  
> -static void intel_sync_crtc(struct drm_crtc *crtc)
> +void intel_sync_crtc(struct drm_crtc *crtc)
>  {
> -	struct drm_device *dev = crtc->dev;
> -	struct drm_i915_private *dev_priv = dev->dev_private;
>  	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
>  
> +	WARN(!mutex_is_locked(&intel_crtc->base.mutex), "need crtc mutex\n");
> +
> +	mutex_unlock(&intel_crtc->base.mutex);
>  	flush_work(&intel_crtc->disable_work);
>  	flush_work(&intel_crtc->enable_work);
> +	mutex_lock(&intel_crtc->base.mutex);
>  }
>  
>  /**
> @@ -9781,8 +9793,9 @@ static int intel_set_mode(struct drm_crtc *crtc,
>  
>  	ret = __intel_set_mode(crtc, mode, x, y, fb);
>  
> -	if (ret == 0)
> -		intel_modeset_check_state(crtc->dev);
> +	/* FIXME: need to check after the CRTC changes have been applied */
> +//	if (ret == 0)
> +//		intel_modeset_check_state(crtc->dev);
>  
>  	return ret;
>  }
> @@ -10348,8 +10361,8 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
>  
>  	drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
>  
> -	INIT_WORK(intel_crtc->enable_work, intel_crtc_enable_work);
> -	INIT_WORK(intel_crtc->disable_work, intel_crtc_disable_work);
> +	INIT_WORK(&intel_crtc->enable_work, intel_crtc_enable_work);
> +	INIT_WORK(&intel_crtc->disable_work, intel_crtc_disable_work);
>  }
>  
>  enum pipe intel_get_pipe_from_connector(struct intel_connector *connector)
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 5b5b51e..f104fe1 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -376,6 +376,9 @@ struct intel_crtc {
>  		/* watermarks currently being used  */
>  		struct intel_pipe_wm active;
>  	} wm;
> +
> +	struct work_struct enable_work;
> +	struct work_struct disable_work;
>  };
>  
>  struct intel_plane_wm_parameters {
> @@ -728,6 +731,7 @@ void hsw_disable_ips(struct intel_crtc *crtc);
>  void intel_display_set_init_power(struct drm_device *dev, bool enable);
>  int valleyview_get_vco(struct drm_i915_private *dev_priv);
>  void intel_queue_crtc_disable(struct drm_crtc *crtc);
> +void intel_sync_crtc(struct drm_crtc *crtc);
>  
>  /* intel_dp.c */
>  void intel_dp_init(struct drm_device *dev, int output_reg, enum port port);

What ever happened with this?  Ville and Daniel, can you take a look?
This has the potential to let other stuff run in the 200-2000ms it
takes us to do a mode set...

Thanks,
Jesse

-- 
Jesse Barnes, Intel Open Source Technology Center