[Intel-gfx] [PATCH v2 05/21] drm/i915: add init power domain to always-on power wells

[Imre Deak]

Whenever we request a power domain it has to guarantee that all HW
resources are enabled that are needed to access a HW register associated
with that power domain. In case a register is on an always-on power well
this won't result in turning on a power well, but it may require
enabling some other HW resource. One such resource is the HSW/BDW device
D0 state that is required for all register accesses and thus for all
power wells/power domains.

So far the init power domain (guaranteeing access to all HW registers)
was part of the default i9xx always-on power well, but not the HSW/BDW
always-on power wells. Add the domain to the latter power wells too.

Atm, all the always-on power wells have noop handlers, so this doesn't
change the functionality.

v2:
- clarify semantics of always-on power wells (Paulo)

Signed-off-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/intel_pm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index ebbd0ed..9a608f1 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -5388,7 +5388,8 @@ EXPORT_SYMBOL_GPL(i915_release_power_well);
 
 #define HSW_ALWAYS_ON_POWER_DOMAINS (			\
 	BIT(POWER_DOMAIN_PIPE_A) |			\
-	BIT(POWER_DOMAIN_TRANSCODER_EDP))
+	BIT(POWER_DOMAIN_TRANSCODER_EDP) |		\
+	BIT(POWER_DOMAIN_INIT))
 #define HSW_DISPLAY_POWER_DOMAINS (				\
 	(POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) |	\
 	BIT(POWER_DOMAIN_INIT))
-- 
1.8.4