[Intel-gfx] [PATCH v2] tests/kms_panel_fitter: Test to verify the 2 new drm crtc properties
akash.goel at intel.com
akash.goel at intel.com
Wed Mar 26 05:32:42 CET 2014
From: Akash Goel <akash.goel at intel.com>
This test is a derivative of kms_setmode. This will verify the 2 new drm
crtc properties, added to control the Panel fitter's input & output.
v2: Modified the setting of 'border size' property. As now the 33rd bit
can be used to forcefully enable the Panel fitter.
Signed-off-by: Akash Goel <akash.goel at intel.com>
Tested-by: Akash Goel <akash.goel at intel.com>
---
tests/Makefile.sources | 1 +
tests/kms_panel_fitter.c | 1215 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 1216 insertions(+)
create mode 100644 tests/kms_panel_fitter.c
diff --git a/tests/Makefile.sources b/tests/Makefile.sources
index 88866ac..05ee06c 100644
--- a/tests/Makefile.sources
+++ b/tests/Makefile.sources
@@ -62,6 +62,7 @@ TESTS_progs_M = \
kms_plane \
kms_render \
kms_setmode \
+ kms_panel_fitter \
pm_lpsp \
pm_pc8 \
pm_rps \
diff --git a/tests/kms_panel_fitter.c b/tests/kms_panel_fitter.c
new file mode 100644
index 0000000..3134ba8
--- /dev/null
+++ b/tests/kms_panel_fitter.c
@@ -0,0 +1,1215 @@
+/*
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ * ????? <????@intel.com>
+ */
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <assert.h>
+#include <cairo.h>
+#include <errno.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <string.h>
+#include <getopt.h>
+#include <sys/time.h>
+
+#include "drm_fourcc.h"
+#include "drmtest.h"
+#include "intel_bufmgr.h"
+#include "intel_batchbuffer.h"
+#include "intel_gpu_tools.h"
+#include "igt_kms.h"
+#include "igt_debugfs.h"
+
+#define MAX_CONNECTORS 10
+#define MAX_CRTCS 3
+
+/* max combinations with repetitions */
+#define MAX_COMBINATION_COUNT \
+ (MAX_CONNECTORS * MAX_CONNECTORS * MAX_CONNECTORS)
+#define MAX_COMBINATION_ELEMS MAX_CRTCS
+
+static int drm_fd;
+static drmModeRes *drm_resources;
+static int filter_test_id;
+static bool dry_run;
+
+/*const*/ drmModeModeInfo mode_640_480 = {
+ .name = "640x480",
+ .vrefresh = 60,
+ .clock = 25200,
+
+ .hdisplay = 640,
+ .hsync_start = 656,
+ .hsync_end = 752,
+ .htotal = 800,
+
+ .vdisplay = 480,
+ .vsync_start = 490,
+ .vsync_end = 492,
+ .vtotal = 525,
+
+ .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+enum test_flags {
+ TEST_INVALID = 0x01,
+ TEST_CLONE = 0x02,
+ TEST_SINGLE_CRTC_CLONE = 0x04,
+ TEST_EXCLUSIVE_CRTC_CLONE = 0x08,
+ TEST_VARY_INPUT = 0x10,
+ TEST_VARY_BORDER = 0x20,
+};
+
+struct test_config {
+ const char *name;
+ enum test_flags flags;
+ drmModeRes *resources;
+};
+
+struct connector_config {
+ drmModeConnector *connector;
+ int crtc_idx;
+ bool connected;
+ drmModeModeInfo default_mode;
+};
+
+struct crtc_config {
+ int crtc_idx;
+ int crtc_id;
+ int pipe_id;
+ int connector_count;
+ struct connector_config *cconfs;
+ struct kmstest_fb fb_info;
+ drmModeModeInfo mode;
+};
+
+igt_debugfs_t debugfs;
+igt_pipe_crc_t **pipe_crc;
+static void init_crc(void)
+{
+ int j;
+ igt_debugfs_init(&debugfs);
+ igt_pipe_crc_check(&debugfs);
+ pipe_crc = calloc(2, sizeof(pipe_crc[0]));
+ for (j = 0; j < 2; j++) {
+ int crtc_idx = j;
+ igt_pipe_crc_t *pipe_crc_p = igt_pipe_crc_new(&debugfs, drm_fd, crtc_idx,INTEL_PIPE_CRC_SOURCE_AUTO);
+ if (!pipe_crc_p) {
+ fprintf(stdout, "auto crc not supported on this connector with crtc %i\n",
+ crtc_idx);
+ return;
+ }
+ pipe_crc[crtc_idx] = pipe_crc_p;
+ }
+}
+
+static void read_crc(int crtc_idx)
+{
+ igt_pipe_crc_t *pipe_crc_cur = pipe_crc[crtc_idx];
+ igt_crc_t *crcs = NULL;
+ igt_pipe_crc_start(pipe_crc_cur);
+ igt_pipe_crc_get_crcs(pipe_crc_cur, 1, &crcs);
+ igt_pipe_crc_stop(pipe_crc_cur);
+ fprintf(stdout, "\n Output CRCS: %u %s ", crcs[0].frame, igt_crc_to_string(&crcs[0]));
+ fflush(stdout);
+}
+
+static void dump_planes(
+ int gfx_fd, drmModeRes *resources)
+{
+ drmModePlaneRes *plane_resources;
+ drmModePlane *ovr;
+ int i;
+
+ plane_resources = drmModeGetPlaneResources(gfx_fd);
+ if (plane_resources == NULL) {
+ printf("drmModeGetPlaneResources failed: %s\n",
+ strerror(errno));
+ return;
+ }
+
+ printf("Planes:\n");
+ printf("id\tcrtc\tfb\tCRTC x,y\tx,y\tgamma size\n");
+ for (i = 0; i < plane_resources->count_planes; i++) {
+ ovr = drmModeGetPlane(gfx_fd, plane_resources->planes[i]);
+ if (ovr == NULL) {
+ printf("drmModeGetPlane failed to find overlay: %s\n",
+ strerror(errno));
+ continue;
+ }
+
+ printf("%d\t%d\t%d\t%d,%d\t\t%d,%d\t%d\n",
+ ovr->plane_id, ovr->crtc_id, ovr->fb_id,
+ ovr->crtc_x, ovr->crtc_y, ovr->x, ovr->y,
+ ovr->gamma_size);
+
+ drmModeFreePlane(ovr);
+ }
+ printf("\n");
+
+ return;
+}
+
+static void dump_encoders (
+ int gfx_fd, drmModeRes *resources)
+{
+ int i;
+ drmModeEncoder *encoder;
+ // Dump data on each of the display encoders
+ for (i = 0; i < resources->count_encoders; i++)
+ {
+ encoder = drmModeGetEncoder(gfx_fd, resources->encoders[i]);
+ printf("Encoder %s ...\n", kmstest_encoder_type_str(encoder->encoder_type));
+ printf("\t.encoder_id = %d\n"
+ "\t.encoder_type = %d\n"
+ "\t.crtc_id = %d\n"
+ "\t.possible_crtcs = %d\n"
+ "\t.possible_clones = %d\n",
+ encoder->encoder_id,
+ encoder->encoder_type,
+ encoder->crtc_id,
+ encoder->possible_crtcs,
+ encoder->possible_clones);
+ drmModeFreeEncoder(encoder);
+ }
+}
+
+static void dump_mode(drmModeModeInfo *mode)
+{
+ printf(" %s %d %d %d %d %d %d %d %d %d 0x%x 0x%x %d\n",
+ mode->name,
+ mode->vrefresh,
+ mode->hdisplay,
+ mode->hsync_start,
+ mode->hsync_end,
+ mode->htotal,
+ mode->vdisplay,
+ mode->vsync_start,
+ mode->vsync_end,
+ mode->vtotal,
+ mode->flags,
+ mode->type,
+ mode->clock);
+}
+
+static void dump_connectors(
+ int gfx_fd, drmModeRes *resources)
+{
+ int i, j;
+
+ printf("Connectors:\n");
+ printf("id\tencoder\tstatus\t\ttype\tsize (mm)\tmodes\n");
+ for (i = 0; i < resources->count_connectors; i++) {
+ drmModeConnector *connector;
+ connector = drmModeGetConnector(gfx_fd, resources->connectors[i]);
+ if (connector == NULL) {
+ printf("could not get connector %i: %s\n",
+ resources->connectors[i], strerror(errno));
+ continue;
+ }
+ printf("%d\t%d\t%s\t%s\t%dx%d\t\t%d\n",
+ connector->connector_id,
+ connector->encoder_id,
+ kmstest_connector_status_str(connector->connection),
+ kmstest_connector_type_str(connector->connector_type),
+ connector->mmWidth, connector->mmHeight,
+ connector->count_modes);
+
+ if (connector->count_modes == 0) {
+ drmModeFreeConnector(connector);
+ continue;
+ }
+
+ printf(" modes:\n");
+ printf(" name refresh (Hz) hdisp hss hse htot vdisp "
+ "vss vse vtot flags type clock\n");
+ for (j = 0; j < connector->count_modes; j++)
+ dump_mode(&connector->modes[j]);
+
+ drmModeFreeConnector(connector);
+ }
+ printf("\n");
+}
+static void dump_crtcs(
+ int gfx_fd,
+ drmModeRes *resources)
+{
+ int i;
+
+ printf("CRTCs:\n");
+ printf("id\tfb\tpos\tsize\n");
+ for (i = 0; i < resources->count_crtcs; i++) {
+ drmModeCrtc *crtc;
+ crtc = drmModeGetCrtc(gfx_fd, resources->crtcs[i]);
+ if (crtc == NULL) {
+ printf("could not get crtc %i: %s\n",
+ resources->crtcs[i],
+ strerror(errno));
+ continue;
+ }
+ printf("%d\t%d\t(%d,%d)\t(%dx%d)\t[Pipe %s]\n",
+ crtc->crtc_id,
+ crtc->buffer_id,
+ crtc->x, crtc->y,
+ crtc->width, crtc->height,
+ kmstest_pipe_str(kmstest_get_pipe_from_crtc_id(drm_fd,
+ crtc->crtc_id)));
+ dump_mode(&crtc->mode);
+
+ drmModeFreeCrtc(crtc);
+ }
+ printf("\n");
+}
+
+static void dump_current_display_configuration(void)
+{
+ dump_crtcs(drm_fd, drm_resources);
+ dump_connectors(drm_fd, drm_resources);
+ dump_encoders(drm_fd, drm_resources);
+ dump_planes(drm_fd, drm_resources);
+}
+
+static bool drm_mode_equal(drmModeModeInfo *m1, drmModeModeInfo *m2)
+{
+#define COMP(x) do { if (m1->x != m2->x) return false; } while (0)
+ COMP(vrefresh);
+ COMP(clock);
+ COMP(hdisplay);
+ COMP(hsync_start);
+ COMP(hsync_end);
+ COMP(htotal);
+ COMP(vdisplay);
+ COMP(vsync_start);
+ COMP(vsync_end);
+ COMP(vtotal);
+ COMP(flags);
+
+ return true;
+}
+
+static bool connector_supports_mode(drmModeConnector *connector,
+ drmModeModeInfo *mode)
+{
+ int i;
+
+ for (i = 0; i < connector->count_modes; i++)
+ if (drm_mode_equal(&connector->modes[i], mode))
+ return true;
+
+ return false;
+}
+
+static bool crtc_supports_mode(struct crtc_config *crtc, drmModeModeInfo *mode)
+{
+ int i;
+
+ for (i = 0; i < crtc->connector_count; i++) {
+ if (!connector_supports_mode(crtc->cconfs[i].connector, mode))
+ return false;
+ }
+
+ return true;
+}
+
+static int paint_fb(struct kmstest_fb *fb, const char *test_name,
+ const char **crtc_str, int crtc_count, int current_crtc_idx)
+{
+ double x, y;
+ cairo_t *cr;
+ int i;
+
+ cr = kmstest_get_cairo_ctx(drm_fd, fb);
+
+ kmstest_paint_test_pattern(cr, fb->width, fb->height);
+
+ cairo_select_font_face(cr, "Helvetica", CAIRO_FONT_SLANT_NORMAL,
+ CAIRO_FONT_WEIGHT_NORMAL);
+ cairo_move_to(cr, fb->width / 2, fb->height / 2);
+ cairo_set_font_size(cr, 20);
+ kmstest_cairo_printf_line(cr, align_hcenter, 40, "%s", test_name);
+
+ cairo_get_current_point(cr, &x, &y);
+ cairo_move_to(cr, 60, y);
+
+ for (i = 0; i < crtc_count; i++) {
+ if (i == current_crtc_idx) {
+ cairo_get_current_point(cr, &x, &y);
+ cairo_move_to(cr, x - 10, y);
+ kmstest_cairo_printf_line(cr, align_right, 10, "X");
+ cairo_move_to(cr, x, y);
+ }
+ kmstest_cairo_printf_line(cr, align_left, 20, "%s",
+ crtc_str[i]);
+ }
+
+ cairo_destroy(cr);
+
+ return 0;
+}
+
+static void create_fb_for_crtc(struct crtc_config *crtc,
+ struct kmstest_fb *fb_info, int hdisplay, int vdisplay)
+{
+ int bpp;
+ int depth;
+ bool enable_tiling;
+ int fb_id;
+
+ bpp = 32;
+ depth = 24;
+ enable_tiling = false;
+
+ fb_id = kmstest_create_fb(drm_fd, hdisplay, vdisplay, bpp, depth,
+ enable_tiling, fb_info);
+ assert(fb_id > 0);
+}
+
+static drmModePropertyPtr get_input_size_prop(int crtc_id)
+{
+ uint32_t k;
+ drmModeObjectPropertiesPtr props = NULL;
+ drmModePropertyPtr prop = NULL;
+
+ props = drmModeObjectGetProperties(drm_fd, crtc_id, DRM_MODE_OBJECT_CRTC);
+ fprintf(stdout, "CRTC %s (id: %x), Count_props=%d\n",
+ kmstest_connector_type_str(crtc_id),crtc_id,props->count_props);
+ for (k = 0; k < props->count_props; k++) {
+ prop = drmModeGetProperty(drm_fd, props->props[k]);
+ fprintf(stdout, "Prop->name=%s\n", prop->name);
+ if (strcmp(prop->name, "input size") == 0) {
+ fprintf(stdout, "input size prop found\n");
+ igt_assert(prop->flags & DRM_MODE_PROP_RANGE);
+ break;
+ } else
+ prop = NULL;
+ }
+
+ if (props) {
+ drmFree(props->props);
+ drmFree(props->prop_values);
+ }
+
+ drmFree(props);
+ return prop;
+}
+
+static drmModePropertyPtr get_border_size_prop(int crtc_id)
+{
+ uint32_t k;
+ drmModeObjectPropertiesPtr props = NULL;
+ drmModePropertyPtr prop = NULL;
+
+ props = drmModeObjectGetProperties(drm_fd, crtc_id, DRM_MODE_OBJECT_CRTC);
+ fprintf(stdout, "CRTC %s (id: %x), Count_props=%d\n",
+ kmstest_connector_type_str(crtc_id),crtc_id,props->count_props);
+ for (k = 0; k < props->count_props; k++) {
+ prop = drmModeGetProperty(drm_fd, props->props[k]);
+ fprintf(stdout, "Prop->name=%s\n", prop->name);
+ if (strcmp(prop->name, "border size") == 0) {
+ fprintf(stdout, "border size prop found\n");
+ igt_assert(prop->flags & DRM_MODE_PROP_RANGE);
+ break;
+ } else
+ prop = NULL;
+ }
+
+ if (props) {
+ drmFree(props->props);
+ drmFree(props->prop_values);
+ }
+
+ drmFree(props);
+ return prop;
+}
+
+#define MAX_NUM_CASES 10
+static int border[MAX_NUM_CASES][2] = {{64,60}, {128,120}, {192,180}, {256,240}, {320,300}};
+#define FORCE_PFIT_ENABLE (((uint64_t)1) << 32)
+
+static void test_output_borders(struct crtc_config *crtc, const char *test_name,
+ const char** crtc_str, int crtc_count, int current_crtc_idx)
+{
+ int q;
+ drmModePropertyPtr border_size_prop;
+ int ret = 0;
+
+ border_size_prop = get_border_size_prop(crtc->crtc_id);
+ if (!border_size_prop)
+ return;
+
+ for(q=0; q<MAX_NUM_CASES; q++){
+ if ((border[q][0] == 0) || (border[q][1] == 0))
+ break;
+
+ ret = drmModeObjectSetProperty(drm_fd, crtc->crtc_id, DRM_MODE_OBJECT_CRTC,
+ (uint32_t)border_size_prop->prop_id,
+ (FORCE_PFIT_ENABLE | (border[q][0] << 16) | border[q][1]));
+
+ if (ret) {
+ fprintf(stdout, "border size setting for (%dx%d) failed with retcode %x !!!\n",
+ border[q][0], border[q][1], ret);
+ break;
+ }
+
+ sleep(5);
+ }
+
+ drmFree(border_size_prop);
+}
+
+static int res[MAX_NUM_CASES][2] = {{640,480}, {720,540}, {800,600}, {960,720}, {1024,768}, {1200,900}, {1440,1080}};
+
+static void test_page_flips(struct crtc_config *crtc, const char *test_name,
+ const char** crtc_str, int crtc_count, int current_crtc_idx)
+{
+ int q;
+ struct kmstest_fb fb_info[MAX_NUM_CASES];
+ drmModePropertyPtr input_size_prop;
+ drmModePropertyPtr border_size_prop;
+ int ret = 0;
+
+ input_size_prop = get_input_size_prop(crtc->crtc_id);
+ if (!input_size_prop)
+ return;
+
+ border_size_prop = get_border_size_prop(crtc->crtc_id);
+ if (!border_size_prop) {
+ fprintf(stdout, "border size property not found\n");
+ return;
+ }
+
+ /*
+ * Before starting the page flip test, we need to enable
+ * Panel fitter, so that we can test the flipping of
+ * frame buffers of different resolution. By default
+ * Panel fitter remains disabled as initially modeset
+ * is done as per the native resolution only.
+ * Forcefully enable the Panel fitter through the border
+ * size property.
+ */
+ ret = drmModeObjectSetProperty(drm_fd, crtc->crtc_id, DRM_MODE_OBJECT_CRTC,
+ (uint32_t)border_size_prop->prop_id, FORCE_PFIT_ENABLE);
+ if (ret) {
+ fprintf(stdout, "border size setting failed with retcode %x !!!\n",
+ ret);
+ }
+ sleep(5);
+
+ for(q=0; q<MAX_NUM_CASES; q++){
+ if ((res[q][0] == 0) || (res[q][1] == 0))
+ break;
+
+ create_fb_for_crtc(crtc, &fb_info[q], res[q][0], res[q][1]);
+ paint_fb(&fb_info[q], test_name, crtc_str, crtc_count, current_crtc_idx);
+
+ /* Wait for a Vblank before updating the Pipesrc, so that both
+ Pipesrc update & subsequent page flip queueing can be performed
+ before the next vblank */
+ igt_wait_for_vblank(drm_fd, crtc->pipe_id);
+ ret = drmModeObjectSetProperty(drm_fd, crtc->crtc_id, DRM_MODE_OBJECT_CRTC,
+ (uint32_t)input_size_prop->prop_id,
+ ((res[q][0] << 16) | res[q][1]));
+
+ if (ret) {
+ fprintf(stdout, "Input size setting for fb(%dx%d) failed with retcode %x !!!\n",
+ res[q][0], res[q][1], ret);
+ break;
+ }
+
+ ret = drmModePageFlip(drm_fd, crtc->crtc_id, fb_info[q].fb_id, 0, NULL);
+
+ if (ret < 0) {
+ fprintf(stdout, "Page flip for fb(%dx%d) failed, CRTC[%d][Pipe %s] returned %d\n",
+ res[q][0],res[q][1], crtc->crtc_id,
+ kmstest_pipe_str(crtc->pipe_id), ret);
+ fflush(stdout);
+ break;
+ }
+
+ sleep(5);
+
+ if(q>=1)
+ drmModeRmFB(drm_fd, fb_info[q-1].fb_id);
+ }
+
+ drmModeRmFB(drm_fd, fb_info[q-1].fb_id);
+ drmFree(input_size_prop);
+ drmFree(border_size_prop);
+}
+
+static void get_mode_for_crtc(struct crtc_config *crtc,
+ drmModeModeInfo *mode_ret)
+{
+ drmModeModeInfo mode;
+ int i;
+
+ /*
+ * First try to select a default mode that is supported by all
+ * connectors.
+ */
+ for (i = 0; i < crtc->connector_count; i++) {
+ mode = crtc->cconfs[i].default_mode;
+ if (crtc_supports_mode(crtc, &mode))
+ goto found;
+ }
+
+ /*
+ * Then just fall back to find any that is supported by all
+ * connectors.
+ */
+ for (i = 0; i < crtc->cconfs[0].connector->count_modes; i++) {
+ mode = crtc->cconfs[0].connector->modes[i];
+ if (crtc_supports_mode(crtc, &mode))
+ goto found;
+ }
+
+ /*
+ * If none is found then just pick the default mode of the first
+ * connector and hope the other connectors can support it by scaling
+ * etc.
+ */
+ mode = crtc->cconfs[0].default_mode;
+found:
+ *mode_ret = mode;
+}
+
+static int get_encoder_idx(drmModeRes *resources, drmModeEncoder *encoder)
+{
+ int i;
+
+ for (i = 0; i < resources->count_encoders; i++)
+ if (resources->encoders[i] == encoder->encoder_id)
+ return i;
+ assert(0);
+}
+
+static void get_crtc_config_str(struct crtc_config *crtc, char *buf,
+ size_t buf_size)
+{
+ int pos;
+ int i;
+
+ pos = snprintf(buf, buf_size,
+ "CRTC[%d][Pipe %s] Mode:%s@%dHz Connectors: ",
+ crtc->crtc_id, kmstest_pipe_str(crtc->pipe_id),
+ crtc->mode.name, crtc->mode.vrefresh);
+ if (pos > buf_size)
+ return;
+ for (i = 0; i < crtc->connector_count; i++) {
+ drmModeConnector *connector = crtc->cconfs[i].connector;
+
+ pos += snprintf(&buf[pos], buf_size - pos,
+ "%s%s-%d[%d]%s", i ? ", " : "",
+ kmstest_connector_type_str(connector->connector_type),
+ connector->connector_type_id, connector->connector_id,
+ crtc->cconfs[i].connected ? "" : " (NC)");
+ if (pos > buf_size)
+ return;
+ }
+}
+
+static void setup_crtcs(drmModeRes *resources, struct connector_config *cconf,
+ int connector_count, struct crtc_config *crtcs,
+ int *crtc_count_ret, bool *config_valid_ret)
+{
+ struct crtc_config *crtc;
+ int crtc_count;
+ bool config_valid;
+ int i;
+ int encoder_usage_count[resources->count_encoders];
+
+ i = 0;
+ crtc_count = 0;
+ crtc = crtcs;
+ config_valid = true;
+
+ while (i < connector_count) {
+ drmModeCrtc *drm_crtc;
+ unsigned long encoder_mask;
+ int j;
+
+ igt_assert(crtc_count < MAX_CRTCS);
+
+ crtc->crtc_idx = cconf[i].crtc_idx;
+ drm_crtc = drmModeGetCrtc(drm_fd,
+ resources->crtcs[crtc->crtc_idx]);
+ crtc->crtc_id = drm_crtc->crtc_id;
+ drmModeFreeCrtc(drm_crtc);
+ crtc->pipe_id = kmstest_get_pipe_from_crtc_id(drm_fd,
+ crtc->crtc_id);
+
+ crtc->connector_count = 1;
+ for (j = i + 1; j < connector_count; j++)
+ if (cconf[j].crtc_idx == crtc->crtc_idx)
+ crtc->connector_count++;
+
+ crtc->cconfs = malloc(sizeof(*crtc->cconfs) *
+ crtc->connector_count);
+ assert(crtc->cconfs);
+
+ encoder_mask = 0;
+ for (j = 0; j < crtc->connector_count; j++) {
+ drmModeConnector *connector;
+ drmModeEncoder *encoder;
+
+ crtc->cconfs[j] = cconf[i + j];
+ connector = cconf[i + j].connector;
+
+ /* Intel connectors have only a single encoder */
+ igt_assert(connector->count_encoders == 1);
+ encoder = drmModeGetEncoder(drm_fd,
+ connector->encoders[0]);
+ assert(encoder);
+
+ config_valid &= !!(encoder->possible_crtcs &
+ (1 << crtc->crtc_idx));
+
+ if (config_valid == 0) {
+ fprintf(stdout, "invalid : connector %s, encoder %s, possible_crtcs %x, crtc_idx %x\n",
+ kmstest_connector_type_str(connector->connector_type),
+ kmstest_encoder_type_str(encoder->encoder_type),
+ encoder->possible_crtcs, crtc->crtc_idx);
+ }
+
+ encoder_mask |= 1 << get_encoder_idx(resources,
+ encoder);
+ config_valid &= !(encoder_mask &
+ ~encoder->possible_clones);
+
+ if (config_valid == 0) {
+ fprintf(stdout, "invalid : connector %s, encoder %s, possible_clones %x, encoder_mask %x\n",
+ kmstest_connector_type_str(connector->connector_type),
+ kmstest_encoder_type_str(encoder->encoder_type),
+ (unsigned int)encoder->possible_clones, (unsigned int)encoder_mask);
+ }
+
+ drmModeFreeEncoder(encoder);
+ }
+ get_mode_for_crtc(crtc, &crtc->mode);
+ create_fb_for_crtc(crtc, &crtc->fb_info, crtc->mode.hdisplay, crtc->mode.vdisplay);
+
+ i += crtc->connector_count;
+ crtc_count++;
+ crtc++;
+ }
+
+ memset(encoder_usage_count, 0, sizeof(encoder_usage_count));
+ for (i = 0; i < connector_count; i++) {
+ drmModeConnector *connector = cconf[i].connector;
+ drmModeEncoder *encoder;
+
+ igt_assert(connector->count_encoders == 1);
+ encoder = drmModeGetEncoder(drm_fd, connector->encoders[0]);
+ encoder_usage_count[get_encoder_idx(resources, encoder)]++;
+
+ if (encoder_usage_count[i] > 1) {
+ fprintf(stdout, "invalid : connector %s, encoder %s, encoder_usage_count %x\n",
+ kmstest_connector_type_str(connector->connector_type),
+ kmstest_encoder_type_str(encoder->encoder_type),
+ encoder_usage_count[get_encoder_idx(resources, encoder)]);
+ }
+ drmModeFreeEncoder(encoder);
+ }
+ for (i = 0; i < resources->count_encoders; i++)
+ if (encoder_usage_count[i] > 1)
+ config_valid = false;
+
+ *crtc_count_ret = crtc_count;
+ *config_valid_ret = config_valid;
+}
+
+static void cleanup_crtcs(struct crtc_config *crtcs, int crtc_count)
+{
+ int i;
+
+ for (i = 0; i < crtc_count; i++) {
+ free(crtcs[i].cconfs);
+ }
+}
+
+static uint32_t *get_connector_ids(struct crtc_config *crtc)
+{
+ uint32_t *ids;
+ int i;
+
+ ids = malloc(sizeof(*ids) * crtc->connector_count);
+ assert(ids);
+ for (i = 0; i < crtc->connector_count; i++)
+ ids[i] = crtc->cconfs[i].connector->connector_id;
+
+ return ids;
+}
+
+static void force_modeset(struct crtc_config *crtc, const char *test_name,
+ const char** crtc_str, int crtc_count, int current_crtc_idx)
+{
+ struct kmstest_fb fb_info;
+ uint32_t *ids;
+ int ret = 0;
+
+ create_fb_for_crtc(crtc, &fb_info, mode_640_480.hdisplay, mode_640_480.vdisplay);
+ paint_fb(&fb_info, test_name, crtc_str, crtc_count, current_crtc_idx);
+
+ ids = get_connector_ids(crtc);
+
+ /*
+ * Do a dummy modeset with a 640x480 fb to forcefully enable
+ * the Panel fitter. This is effective only for fixed mode
+ * panels like edp
+ */
+ ret = drmModeSetCrtc(drm_fd, crtc->crtc_id,
+ fb_info.fb_id, 0, 0, ids,
+ crtc->connector_count, &mode_640_480);
+
+ fprintf(stdout, "Dummy ModeSet CRTC[%d][Pipe %s] returned %d\n",
+ crtc->crtc_id, kmstest_pipe_str(crtc->pipe_id), ret);
+ fflush(stdout);
+ if (ret < 0)
+ igt_assert(errno == EINVAL);
+
+ sleep(5);
+
+ free(ids);
+}
+
+static void test_crtc_config(const struct test_config *tconf,
+ struct crtc_config *crtcs, int crtc_count)
+{
+ char str_buf[MAX_CRTCS][1024];
+ const char *crtc_strs[MAX_CRTCS];
+ struct crtc_config *crtc;
+ static int test_id;
+ bool connector_connected = false;
+ int ret = 0;
+ int i;
+ test_id++;
+
+ if (filter_test_id && filter_test_id != test_id)
+ return;
+
+ printf(" Test id#%d CRTC count %d\n", test_id, crtc_count);
+
+ for (i = 0; i < crtc_count; i++) {
+ get_crtc_config_str(&crtcs[i], str_buf[i], sizeof(str_buf[i]));
+ crtc_strs[i] = &str_buf[i][0];
+ }
+
+ if (dry_run) {
+ for (i = 0; i < crtc_count; i++)
+ printf(" %s\n", crtc_strs[i]);
+ return;
+ }
+
+ for (i = 0; i < crtc_count; i++) {
+ uint32_t *ids;
+ int j;
+
+ crtc = &crtcs[i];
+ printf(" %s\n", crtc_strs[i]);
+
+ /*
+ * Only do the test on a crtc which at least have one connector
+ * in a connected state, otherwise skip
+ */
+ for (j = 0; j < crtc->connector_count; j++)
+ if(crtc->cconfs[j].connected)
+ break;
+ if (j == crtc->connector_count) {
+ fprintf(stdout, "No connector connected, Skipping ModeSet for CRTC[%d][Pipe %s] \n",
+ crtc->crtc_id, kmstest_pipe_str(crtc->pipe_id));
+ fflush(stdout);
+ continue;
+ }
+
+ create_fb_for_crtc(crtc, &crtc->fb_info, crtc->mode.hdisplay, crtc->mode.vdisplay);
+ paint_fb(&crtc->fb_info, tconf->name, crtc_strs, crtc_count, i);
+
+ ids = get_connector_ids(crtc);
+ ret = drmModeSetCrtc(drm_fd, crtc->crtc_id,
+ crtc->fb_info.fb_id, 0, 0, ids,
+ crtc->connector_count, &crtc->mode);
+
+ fprintf(stdout, "ModeSet CRTC[%d][Pipe %s] returned %d\n",
+ crtc->crtc_id, kmstest_pipe_str(crtc->pipe_id), ret);
+ fflush(stdout);
+
+ if (ret < 0)
+ igt_assert(errno == EINVAL);
+
+ sleep(10);
+
+ /*read_crc(crtc->pipe_id);*/
+
+ if (tconf->flags & TEST_VARY_INPUT) {
+ test_page_flips(crtc, tconf->name, crtc_strs, crtc_count, i);
+ } else if (tconf->flags & TEST_VARY_BORDER) {
+ /* Two cases to be checked when applying the borders */
+
+ /*
+ * First check for downscaling actions by panel fitter, as
+ * applying borders on native resolution will lead to downscaling
+ */
+ test_output_borders(crtc, tconf->name, crtc_strs, crtc_count, i);
+
+ /*
+ * Check upscaling action by Panel fitter when applying
+ * borders. For that do a modeset with a lower resolution
+ * (640x480) buffer. But this action will work on fixed
+ * mode panels only. For panels like HDMI, the Pipe
+ * timings is set as per the User's resolution only on
+ * modeset. And for varying the borders, Driver has to
+ * internally do a modeset, so pipe timings always gets
+ * set as per the User resolution. Hence when border is
+ * applied, it actually leads to downscaling at
+ * Pipe level.
+ */
+ force_modeset(crtc, tconf->name, crtc_strs, crtc_count, i);
+ test_output_borders(crtc, tconf->name, crtc_strs, crtc_count, i);
+ }
+
+ free(ids);
+ }
+
+ if (ret == 0 && connector_connected)
+ sleep(5);
+
+ for (i = 0; i < crtc_count; i++) {
+ if (crtcs[i].fb_info.fb_id) {
+ drmModeSetCrtc(drm_fd, crtcs[i].crtc_id, 0, 0, 0, NULL,
+ 0, NULL);
+ drmModeRmFB(drm_fd, crtcs[i].fb_info.fb_id);
+ crtcs[i].fb_info.fb_id = 0;
+ }
+ }
+
+ return;
+}
+
+static void test_one_combination(const struct test_config *tconf,
+ struct connector_config *cconfs,
+ int connector_count)
+{
+ struct crtc_config crtcs[MAX_CRTCS];
+ int crtc_count;
+ bool config_valid;
+
+ setup_crtcs(tconf->resources, cconfs, connector_count, crtcs,
+ &crtc_count, &config_valid);
+
+ if (config_valid == !(tconf->flags & TEST_INVALID))
+ test_crtc_config(tconf, crtcs, crtc_count);
+
+ cleanup_crtcs(crtcs, crtc_count);
+}
+
+static int assign_crtc_to_connectors(const struct test_config *tconf,
+ int *crtc_idxs, int connector_count,
+ struct connector_config *cconfs)
+{
+ unsigned long crtc_idx_mask;
+ int i;
+
+ crtc_idx_mask = 0;
+ for (i = 0; i < connector_count; i++) {
+ int crtc_idx = crtc_idxs[i];
+
+ if ((tconf->flags & TEST_SINGLE_CRTC_CLONE) &&
+ crtc_idx_mask & ~(1 << crtc_idx))
+ return -1;
+
+ if ((tconf->flags & TEST_EXCLUSIVE_CRTC_CLONE) &&
+ crtc_idx_mask & (1 << crtc_idx))
+ return -1;
+
+ crtc_idx_mask |= 1 << crtc_idx;
+
+ cconfs[i].crtc_idx = crtc_idx;
+ }
+
+ return 0;
+}
+
+static int get_one_connector(drmModeRes *resources, int connector_id,
+ struct connector_config *cconf)
+{
+ drmModeConnector *connector;
+ drmModeModeInfo mode;
+
+ connector = drmModeGetConnector(drm_fd, connector_id);
+ assert(connector);
+ cconf->connector = connector;
+
+ cconf->connected = connector->connection == DRM_MODE_CONNECTED;
+
+ /*
+ * For DP/eDP we need a connected sink, since mode setting depends
+ * on successful link training and retrieved DPCD parameters.
+ */
+ switch (connector->connector_type) {
+ case DRM_MODE_CONNECTOR_DisplayPort:
+ case DRM_MODE_CONNECTOR_eDP:
+ if (!cconf->connected) {
+ drmModeFreeConnector(connector);
+ return -1;
+ }
+ }
+
+ if (cconf->connected) {
+ if (kmstest_get_connector_default_mode(drm_fd, connector,
+ &mode) < 0)
+ mode = mode_640_480;
+ } else {
+ mode = mode_640_480;
+ }
+
+ cconf->default_mode = mode;
+
+ return 0;
+}
+
+static int get_connectors(drmModeRes *resources, int *connector_idxs,
+ int connector_count, struct connector_config *cconfs)
+{
+ int i;
+
+ for (i = 0; i < connector_count; i++) {
+ int connector_idx;
+ int connector_id;
+
+ connector_idx = connector_idxs[i];
+ assert(connector_idx < resources->count_connectors);
+ connector_id = resources->connectors[connector_idx];
+
+ if (get_one_connector(resources, connector_id, &cconfs[i]) < 0)
+ goto err;
+
+ }
+
+ return 0;
+
+err:
+ while (i--)
+ drmModeFreeConnector(cconfs[i].connector);
+
+ return -1;
+}
+
+static void free_connectors(struct connector_config *cconfs,
+ int connector_count)
+{
+ int i;
+
+ for (i = 0; i < connector_count; i++)
+ drmModeFreeConnector(cconfs[i].connector);
+}
+
+struct combination {
+ int elems[MAX_COMBINATION_ELEMS];/*ex:(planeA->edp,planeB->mipi,planeC->hdmi),(planeA->mipi,planeB->edp,planeC->hdmi) etc*/
+};
+
+struct combination_set {
+ int count;
+ struct combination items[MAX_COMBINATION_COUNT];/*all possible combinations generated as above comment*/
+};
+
+/*
+ * Get all possible selection of k elements from n elements with or without
+ * repetitions.
+ */
+static void iterate_combinations(int n, int k, bool allow_repetitions,
+ int depth, int base, struct combination *comb,
+ struct combination_set *set)
+{
+ int v;
+
+ if (!k) {
+ assert(set->count < ARRAY_SIZE(set->items));
+ set->items[set->count++] = *comb;
+ return;
+ }
+
+ for (v = base; v < n; v++) {
+ comb->elems[depth] = v;
+ iterate_combinations(n, k - 1, allow_repetitions,
+ depth + 1, allow_repetitions ? 0 : v + 1,
+ comb, set);
+ }
+
+}
+
+static void get_combinations(int n, int k, bool allow_repetitions,
+ struct combination_set *set)
+{
+ struct combination comb;
+
+ assert(k <= ARRAY_SIZE(set->items[0].elems));
+ set->count = 0;
+ iterate_combinations(n, k, allow_repetitions, 0, 0, &comb, set);
+}
+
+static void test_combinations(const struct test_config *tconf,
+ int connector_count)
+{
+ struct combination_set connector_combs;
+ struct combination_set crtc_combs;
+ struct connector_config *cconfs;
+ int i;
+
+ get_combinations(tconf->resources->count_connectors, connector_count,
+ false, &connector_combs);
+ get_combinations(tconf->resources->count_crtcs, connector_count,
+ true, &crtc_combs);
+
+ printf("Testing: %s %d connector combinations\n", tconf->name,
+ connector_count);
+ for (i = 0; i < connector_combs.count; i++) {
+ int *connector_idxs;
+ int ret;
+ int j;
+
+ cconfs = malloc(sizeof(*cconfs) * connector_count);
+ assert(cconfs);
+
+ connector_idxs = &connector_combs.items[i].elems[0];
+ ret = get_connectors(tconf->resources, connector_idxs,
+ connector_count, cconfs);
+ if (ret < 0)
+ goto free_cconfs;
+
+ for (j = 0; j < crtc_combs.count; j++) {
+ int *crtc_idxs = &crtc_combs.items[j].elems[0];
+ ret = assign_crtc_to_connectors(tconf, crtc_idxs,
+ connector_count,
+ cconfs);
+ if (ret < 0)
+ continue;
+
+ test_one_combination(tconf, cconfs, connector_count);
+ }
+
+ free_connectors(cconfs, connector_count);
+free_cconfs:
+ free(cconfs);
+ }
+}
+
+static void run_test(const struct test_config *tconf)
+{
+ int connector_num;
+
+ connector_num = tconf->flags & TEST_CLONE ? 2 : 1;
+ for (; connector_num <= tconf->resources->count_crtcs; connector_num++)
+ test_combinations(tconf, connector_num);
+}
+
+static int opt_handler(int opt, int opt_index)
+{
+ switch (opt) {
+ case 'd':
+ dry_run = true;
+ break;
+ case 't':
+ filter_test_id = atoi(optarg);
+ break;
+ default:
+ assert(0);
+ }
+
+ return 0;
+}
+
+int main(int argc, char **argv)
+{
+ const struct {
+ enum test_flags flags;
+ const char *name;
+ } tests[] = {
+ { TEST_CLONE | TEST_EXCLUSIVE_CRTC_CLONE | TEST_VARY_INPUT,
+ "clone-exclusive-crtc-with-varying-input" },
+ { TEST_CLONE | TEST_EXCLUSIVE_CRTC_CLONE | TEST_VARY_BORDER,
+ "clone-exclusive-crtc-with-varying-output" },
+ };
+ const char *help_str =
+ " -d\t\tDon't run any test, only print what would be done. (still needs DRM access)\n"
+ " -t <test id>\tRun only the test with this id.";
+ int i;
+ int ret;
+
+ ret = igt_subtest_init_parse_opts(argc, argv, "dt:", NULL, help_str,
+ opt_handler);
+ if (ret < 0)
+ return ret == -1 ? 0 : ret;
+
+ igt_skip_on_simulation();
+
+ if (dry_run && filter_test_id) {
+ fprintf(stderr, "only one of -d and -t is accepted\n");
+ exit(1);
+ }
+
+ igt_fixture {
+ drm_fd = drm_open_any();
+ if (!dry_run)
+ igt_set_vt_graphics_mode();
+
+ drm_resources = drmModeGetResources(drm_fd);
+ assert(drm_resources);
+ }
+
+ if (dry_run)
+ dump_current_display_configuration();
+
+ fprintf(stdout, "Tests starting\n");
+ fflush(stdout);
+
+ init_crc();
+
+ for (i = 0; i < ARRAY_SIZE(tests); i++) {
+ igt_subtest(tests[i].name) {
+ struct test_config tconf = {
+ .flags = tests[i].flags,
+ .name = tests[i].name,
+ .resources = drm_resources,
+ };
+ run_test(&tconf);
+ }
+ }
+
+ fprintf(stdout, "All tests completed\n");
+ fflush(stdout);
+
+ igt_fixture {
+ drmModeFreeResources(drm_resources);
+
+ close(drm_fd);
+ }
+
+ fprintf(stdout, "Test about to exit\n");
+ fflush(stdout);
+
+ igt_exit();
+
+ fprintf(stdout, "End of main\n");
+ fflush(stdout);
+}
--
1.8.5.2
More information about the Intel-gfx
mailing list