[Intel-gfx] [PATCH 3/6] drm/i915: Add support for DRRS to switch RR
Vandana Kannan
vandana.kannan at intel.com
Thu Mar 27 09:59:46 CET 2014
On Mar-26-2014 6:25 PM, Jani Nikula wrote:
> On Fri, 07 Mar 2014, Vandana Kannan <vandana.kannan at intel.com> wrote:
>> From: Pradeep Bhat <pradeep.bhat at intel.com>
>>
>> This patch computes and stored 2nd M/N/TU for switching to different
>> refresh rate dynamically. PIPECONF_EDP_RR_MODE_SWITCH bit helps toggle
>> between alternate refresh rates programmed in 2nd M/N/TU registers.
>>
>> v2: Daniel's review comments
>> Computing M2/N2 in compute_config and storing it in crtc_config
>>
>> v3: Modified reference to edp_downclock and edp_downclock_avail based on the
>> changes made to move them from dev_private to intel_panel.
>>
>> v4: Modified references to is_drrs_supported based on the changes made to
>> rename it to drrs_support.
>>
>> v5: Jani's review comments
>> Removed superfluous return statements. Changed support for Gen 7 and above.
>> Corrected indentation. Re-structured the code which finds crtc and connector
>> from encoder. Changed some logs to be less verbose.
>>
>> v6: Modifying i915_drrs to include only intel connector as intel_dp can be
>> derived from intel connector when required.
>>
>> v7: As per internal review comments, acquiring mutex just before accessing
>> drrs RR. As per Chris's review comments, added documentation about the use
>> of locking in the function.
>>
>> Signed-off-by: Pradeep Bhat <pradeep.bhat at intel.com>
>> Signed-off-by: Vandana Kannan <vandana.kannan at intel.com>
>> ---
>> drivers/gpu/drm/i915/i915_drv.h | 5 ++
>> drivers/gpu/drm/i915/i915_reg.h | 1 +
>> drivers/gpu/drm/i915/intel_dp.c | 108 ++++++++++++++++++++++++++++++++++++++
>> drivers/gpu/drm/i915/intel_drv.h | 6 ++-
>> 4 files changed, 119 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
>> index 6b4d0b20..43d3dfe 100644
>> --- a/drivers/gpu/drm/i915/i915_drv.h
>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>> @@ -774,6 +774,10 @@ struct i915_fbc {
>> } no_fbc_reason;
>> };
>>
>> +struct i915_drrs {
>> + struct intel_connector *connector;
>> +};
>> +
>> struct i915_psr {
>> bool sink_support;
>> bool source_ok;
>> @@ -1466,6 +1470,7 @@ typedef struct drm_i915_private {
>> int num_plane;
>>
>> struct i915_fbc fbc;
>> + struct i915_drrs drrs;
>> struct intel_opregion opregion;
>> struct intel_vbt_data vbt;
>>
>> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>> index f73a49d..bfd7703 100644
>> --- a/drivers/gpu/drm/i915/i915_reg.h
>> +++ b/drivers/gpu/drm/i915/i915_reg.h
>> @@ -3225,6 +3225,7 @@
>> #define PIPECONF_INTERLACED_DBL_ILK (4 << 21) /* ilk/snb only */
>> #define PIPECONF_PFIT_PF_INTERLACED_DBL_ILK (5 << 21) /* ilk/snb only */
>> #define PIPECONF_INTERLACE_MODE_MASK (7 << 21)
>> +#define PIPECONF_EDP_RR_MODE_SWITCH (1 << 20)
>> #define PIPECONF_CXSR_DOWNCLOCK (1<<16)
>> #define PIPECONF_COLOR_RANGE_SELECT (1 << 13)
>> #define PIPECONF_BPC_MASK (0x7 << 5)
>> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
>> index 39365bf..54cde57 100644
>> --- a/drivers/gpu/drm/i915/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/intel_dp.c
>> @@ -832,6 +832,20 @@ intel_dp_set_clock(struct intel_encoder *encoder,
>> }
>> }
>>
>> +static void
>> +intel_dp_set_m2_n2(struct intel_crtc *crtc, struct intel_link_m_n *m_n)
>> +{
>> + struct drm_device *dev = crtc->base.dev;
>> + struct drm_i915_private *dev_priv = dev->dev_private;
>> + enum transcoder transcoder = crtc->config.cpu_transcoder;
>> +
>> + I915_WRITE(PIPE_DATA_M2(transcoder),
>> + TU_SIZE(m_n->tu) | m_n->gmch_m);
>> + I915_WRITE(PIPE_DATA_N2(transcoder), m_n->gmch_n);
>> + I915_WRITE(PIPE_LINK_M2(transcoder), m_n->link_m);
>> + I915_WRITE(PIPE_LINK_N2(transcoder), m_n->link_n);
>> +}
>> +
>> bool
>> intel_dp_compute_config(struct intel_encoder *encoder,
>> struct intel_crtc_config *pipe_config)
>> @@ -936,6 +950,15 @@ found:
>> pipe_config->port_clock,
>> &pipe_config->dp_m_n);
>>
>> + if (intel_connector->panel.edp_downclock_avail &&
>> + intel_dp->drrs_state.type == SEAMLESS_DRRS_SUPPORT) {
>
> Again, seems like intel_connector->panel.edp_downclock_avail is useless
> state. Why not just look at intel_connector->panel.downclock_mode !=
> NULL?
>
I will make this change..
>> + intel_link_compute_m_n(bpp, lane_count,
>> + intel_connector->panel.edp_downclock,
>> + pipe_config->port_clock,
>> + &pipe_config->dp_m2_n2);
>> + }
>> +
>> +
>> intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
>>
>> return true;
>> @@ -3666,6 +3689,87 @@ intel_dp_init_panel_power_sequencer_registers(struct drm_device *dev,
>> I915_READ(pp_div_reg));
>> }
>>
>> +void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate)
>> +{
>> + struct drm_i915_private *dev_priv = dev->dev_private;
>> + struct intel_encoder *encoder;
>> + struct intel_dp *intel_dp = NULL;
>> + struct intel_crtc_config *config = NULL;
>> + struct intel_crtc *intel_crtc = NULL;
>> + struct intel_connector *intel_connector = dev_priv->drrs.connector;
>
> This drrs.connector is also starting to look like extra state that could
> be derived from somewhere else.
>
Yes, it can be derived from dev. To avoid iterating through the
connector list each time, I have saved the state here..
>> + u32 reg, val;
>> + int index = 0;
>> +
>> + if (refresh_rate <= 0) {
>> + DRM_DEBUG_KMS("Refresh rate should be positive non-zero.\n");
>> + return;
>> + }
>> +
>> + if (intel_connector == NULL) {
>> + DRM_DEBUG_KMS("DRRS supported for eDP only.\n");
>> + return;
>> + }
>> +
>> + encoder = intel_attached_encoder(&intel_connector->base);
>> + intel_dp = enc_to_intel_dp(&encoder->base);
>> + intel_crtc = encoder->new_crtc;
>> +
>> + if (!intel_crtc) {
>> + DRM_DEBUG_KMS("DRRS: intel_crtc not initialized\n");
>> + return;
>> + }
>> +
>> + config = &intel_crtc->config;
>> +
>> + if (intel_dp->drrs_state.type < SEAMLESS_DRRS_SUPPORT) {
>> + DRM_DEBUG_KMS("Seamless DRRS not supported.\n");
>> + return;
>> + }
>> +
>> + if (intel_connector->panel.fixed_mode->vrefresh == refresh_rate)
>> + index = DRRS_HIGH_RR;
>> + else
>> + index = DRRS_LOW_RR;
>> +
>> + if (index == intel_dp->drrs_state.refresh_rate_type) {
>> + DRM_DEBUG_KMS(
>> + "DRRS requested for previously set RR...ignoring\n");
>> + return;
>> + }
>> +
>> + if (!intel_crtc->active) {
>> + DRM_DEBUG_KMS("eDP encoder disabled. CRTC not Active\n");
>> + return;
>> + }
>> +
>> + if (INTEL_INFO(dev)->gen > 6 && INTEL_INFO(dev)->gen < 8) {
>> + reg = PIPECONF(intel_crtc->config.cpu_transcoder);
>> + val = I915_READ(reg);
>> + if (index > DRRS_HIGH_RR) {
>> + val |= PIPECONF_EDP_RR_MODE_SWITCH;
>> + intel_dp_set_m2_n2(intel_crtc, &config->dp_m2_n2);
>> + } else {
>> + val &= ~PIPECONF_EDP_RR_MODE_SWITCH;
>> + }
>> + I915_WRITE(reg, val);
>> + }
>> +
>> + /*
>> + * mutex taken to ensure that there is no race between differnt
>> + * drrs calls trying to update refresh rate. This scenario may occur
>> + * in future when idleness detection based DRRS in kernel and
>> + * possible calls from user space to set differnt RR are made.
>> + */
>> +
>> + mutex_lock(&intel_dp->drrs_state.mutex);
>
> Isn't this always done with dev->struct_mutex held? Why extra locking?
>
This has been added to take care of scenarios that may occur in future
based on user space implementation.
>> +
>> + intel_dp->drrs_state.refresh_rate_type = index;
>> +
>> + mutex_unlock(&intel_dp->drrs_state.mutex);
>> +
>> + DRM_DEBUG_KMS("eDP Refresh Rate set to : %dHz\n", refresh_rate);
>> +}
>> +
>> static struct drm_display_mode *
>> intel_dp_drrs_init(struct intel_digital_port *intel_dig_port,
>> struct intel_connector *intel_connector,
>> @@ -3701,6 +3805,10 @@ intel_dp_drrs_init(struct intel_digital_port *intel_dig_port,
>> intel_connector->panel.edp_downclock =
>> downclock_mode->clock;
>>
>> + dev_priv->drrs.connector = intel_connector;
>> +
>> + mutex_init(&intel_dp->drrs_state.mutex);
>> +
>> intel_dp->drrs_state.type = dev_priv->vbt.drrs_type;
>>
>> intel_dp->drrs_state.refresh_rate_type = DRRS_HIGH_RR;
>> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
>> index c41c735..4f7c816 100644
>> --- a/drivers/gpu/drm/i915/intel_drv.h
>> +++ b/drivers/gpu/drm/i915/intel_drv.h
>> @@ -291,6 +291,9 @@ struct intel_crtc_config {
>> int pipe_bpp;
>> struct intel_link_m_n dp_m_n;
>>
>> + /* m2_n2 for eDP downclock */
>> + struct intel_link_m_n dp_m2_n2;
>> +
>> /*
>> * Frequence the dpll for the port should run at. Differs from the
>> * adjusted dotclock e.g. for DP or 12bpc hdmi mode. This is also
>> @@ -481,6 +484,7 @@ enum edp_drrs_refresh_rate_type {
>> struct drrs_info {
>> enum drrs_support_type type;
>> enum edp_drrs_refresh_rate_type refresh_rate_type;
>> + struct mutex mutex;
>> };
>>
>> struct intel_dp {
>> @@ -769,7 +773,7 @@ void intel_edp_panel_off(struct intel_dp *intel_dp);
>> void intel_edp_psr_enable(struct intel_dp *intel_dp);
>> void intel_edp_psr_disable(struct intel_dp *intel_dp);
>> void intel_edp_psr_update(struct drm_device *dev);
>> -
>> +void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate);
>>
>> /* intel_dsi.c */
>> bool intel_dsi_init(struct drm_device *dev);
>> --
>> 1.7.9.5
>>
>> _______________________________________________
>> Intel-gfx mailing list
>> Intel-gfx at lists.freedesktop.org
>> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
More information about the Intel-gfx
mailing list