[Intel-gfx] [PATCH] drm/i915: use __func__ instead of __FUNCTION__

Christoph Jaeger christophjaeger at linux.com
Fri Mar 28 00:20:36 CET 2014


__FUNCTION__ is gcc specific; use __func__ instead.

Signed-off-by: Christoph Jaeger <christophjaeger at linux.com>
---
 drivers/gpu/drm/i915/dvo_ns2501.c | 15 ++++++---------
 1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/i915/dvo_ns2501.c b/drivers/gpu/drm/i915/dvo_ns2501.c
index 954acb2..e40cd26 100644
--- a/drivers/gpu/drm/i915/dvo_ns2501.c
+++ b/drivers/gpu/drm/i915/dvo_ns2501.c
@@ -234,7 +234,7 @@ static enum drm_mode_status ns2501_mode_valid(struct intel_dvo_device *dvo,
 {
 	DRM_DEBUG_KMS
 	    ("%s: is mode valid (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d)\n",
-	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
+	     __func__, mode->hdisplay, mode->htotal, mode->vdisplay,
 	     mode->vtotal);
 
 	/*
@@ -262,7 +262,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 	DRM_DEBUG_KMS
 	    ("%s: set mode (hdisplay=%d,htotal=%d,vdisplay=%d,vtotal=%d).\n",
-	     __FUNCTION__, mode->hdisplay, mode->htotal, mode->vdisplay,
+	     __func__, mode->hdisplay, mode->htotal, mode->vdisplay,
 	     mode->vtotal);
 
 	/*
@@ -277,8 +277,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 		if (mode->hdisplay == 800 && mode->vdisplay == 600) {
 			/* mode 277 */
 			ns->reg_8_shadow &= ~NS2501_8_BPAS;
-			DRM_DEBUG_KMS("%s: switching to 800x600\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("%s: switching to 800x600\n", __func__);
 
 			/*
 			 * No, I do not know where this data comes from.
@@ -341,8 +340,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 		} else if (mode->hdisplay == 640 && mode->vdisplay == 480) {
 			/* mode 274 */
-			DRM_DEBUG_KMS("%s: switching to 640x480\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("%s: switching to 640x480\n", __func__);
 			/*
 			 * No, I do not know where this data comes from.
 			 * It is just what the video bios left in the DVO, so
@@ -406,8 +404,7 @@ static void ns2501_mode_set(struct intel_dvo_device *dvo,
 
 		} else if (mode->hdisplay == 1024 && mode->vdisplay == 768) {
 			/* mode 280 */
-			DRM_DEBUG_KMS("%s: switching to 1024x768\n",
-				      __FUNCTION__);
+			DRM_DEBUG_KMS("%s: switching to 1024x768\n", __func__);
 			/*
 			 * This might or might not work, actually. I'm silently
 			 * assuming here that the native panel resolution is
@@ -459,7 +456,7 @@ static void ns2501_dpms(struct intel_dvo_device *dvo, bool enable)
 	unsigned char ch;
 
 	DRM_DEBUG_KMS("%s: Trying set the dpms of the DVO to %i\n",
-		      __FUNCTION__, enable);
+		      __func__, enable);
 
 	ch = ns->reg_8_shadow;
 
-- 
1.8.5.3




More information about the Intel-gfx mailing list