[Intel-gfx] [PATCH] drm/edid: Fill PAR in AVI infoframe based on CEA mode list

[Daniel Vetter]

On Fri, Mar 21, 2014 at 08:31:29AM +0530, Vandana Kannan wrote:
> Populate PAR in infoframe structure. If there is a user setting for PAR, then
> that value is set. Else, value is taken from CEA mode list if VIC is found.
> Else, PAR is calculated from resolution. If none of these conditions are
> satisfied, PAR is NONE as per initialization.
> 
> As a next step, create a property that would enable a user space app to set
> aspect ratio. (will be pushed as a separate patch)
> 
> Signed-off-by: Vandana Kannan <vandana.kannan at intel.com>
> Cc: Jesse Barnes <jesse.barnes at intel.com>
> Cc: Vijay Purushothaman <vijay.a.purushothaman at intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: intel-gfx at lists.freedesktop.org
> ---
>  drivers/gpu/drm/drm_edid.c |   34 ++++++++++++++++++++++++++++++++++
>  include/drm/drm_crtc.h     |    1 +
>  2 files changed, 35 insertions(+)
> 
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index d4e3f9d..3db693f 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -2452,6 +2452,21 @@ u8 drm_match_cea_mode(const struct drm_display_mode *to_match)
>  }
>  EXPORT_SYMBOL(drm_match_cea_mode);
>  
> +/**
> + * drm_get_cea_aspect_ratio - get the picture aspect ratio corresponding to
> + * the input VIC from the CEA mode list
> + *
> + * Returns picture aspect ratio
> + */
> +enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code)
> +{
> +	/* return picture aspect ratio for video_code - 1 to access the
> +	 * right array element
> +	*/
> +	return edid_cea_modes[video_code-1].picture_aspect_ratio;
> +}
> +EXPORT_SYMBOL(drm_get_cea_aspect_ratio);
> +
>  /*
>   * Calculate the alternate clock for HDMI modes (those from the HDMI vendor
>   * specific block).
> @@ -3613,6 +3628,25 @@ drm_hdmi_avi_infoframe_from_display_mode(struct hdmi_avi_infoframe *frame,
>  	frame->video_code = drm_match_cea_mode(mode);
>  
>  	frame->picture_aspect = HDMI_PICTURE_ASPECT_NONE;
> +
> +	/* Populate picture aspect ratio from either CEA mode list or
> +	 *  user input
> +	*/
> +	if (mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_4_3 ||
> +		mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_16_9)
> +		frame->picture_aspect = mode->picture_aspect_ratio;

Please pardon my ignorance, but how can userspace actually set this part
of the mode? I couldn't find any code which sets this anywhere ...
-Daniel

> +	else if (frame->video_code > 0)
> +		frame->picture_aspect = drm_get_cea_aspect_ratio(
> +						frame->video_code);
> +	else {
> +		if (!(mode->vdisplay % 3) &&
> +			(((mode->vdisplay * 4) / 3) == mode->hdisplay))
> +			frame->picture_aspect = HDMI_PICTURE_ASPECT_4_3;
> +		else if (!(mode->vdisplay % 9) &&
> +			(((mode->vdisplay * 16) / 9) == mode->hdisplay))
> +			frame->picture_aspect = HDMI_PICTURE_ASPECT_16_9;
> +	}
> +
>  	frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
>  	frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
>  
> diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
> index 27f828c..50dc55a 100644
> --- a/include/drm/drm_crtc.h
> +++ b/include/drm/drm_crtc.h
> @@ -983,6 +983,7 @@ extern int drm_mode_gamma_get_ioctl(struct drm_device *dev,
>  extern int drm_mode_gamma_set_ioctl(struct drm_device *dev,
>  				    void *data, struct drm_file *file_priv);
>  extern u8 drm_match_cea_mode(const struct drm_display_mode *to_match);
> +extern enum hdmi_picture_aspect drm_get_cea_aspect_ratio(const u8 video_code);
>  extern bool drm_detect_hdmi_monitor(struct edid *edid);
>  extern bool drm_detect_monitor_audio(struct edid *edid);
>  extern bool drm_rgb_quant_range_selectable(struct edid *edid);
> -- 
> 1.7.9.5
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/dri-devel

-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch