[Intel-gfx] [PATCH v2] drm/i915: restore backlight precision when converting from opregion
Chris Wilson
chris at chris-wilson.co.uk
Sun May 4 09:22:32 CEST 2014
On Sun, May 04, 2014 at 03:16:05PM +0800, Aaron Lu wrote:
> On 04/28/2014 09:41 PM, Daniel Vetter wrote:
> > 64bit divisions won't compile on 32bit. You need one of the DO_DIV macros,
> > or whatever they're called again. I pain, I know ;-)
>
> Thanks for the correction, here is an updated patch :-)
>
> From: Aaron Lu <aaron.lu at intel.com>
> Date: Mon, 28 Apr 2014 11:02:52 +0800
> Subject: [PATCH v2] drm/i915: restore backlight precision when converting from
> ACPI
>
> When we set backlight on behalf of ACPI opregion, we will convert the
> backlight value in the 0-255 range defined in opregion to the actual
> hardware level. Commit 22505b82a2 (drm/i915: avoid brightness overflow
> when doing scale) is meant to fix the overflow problem when doing the
> conversion, but it also caused a problem that the converted hardware
> level doesn't quite represent the intended value: say user wants maximum
> backlight level(255 in opregion's range), then we will calculate the
> actual hardware level to be: level = freq / max * level, where freq is
> the hardware's max backlight level(937 on an user's box), and max and
> level are all 255. The converted value should be 937 but the above
> calculation will yield 765.
>
> To fix this issue, just use 64 bits to do the calculation to keep the
> precision and avoid overflow at the same time.
>
> Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=72491
> Reported-by: Nico Schottelius <nico-bugzilla.kernel.org at schottelius.org>
> Signed-off-by: Aaron Lu <aaron.lu at intel.com>
> ---
> v2: use do_div as reminded by Daniel.
>
> drivers/gpu/drm/i915/intel_panel.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> index a953b081ee38..8725917a3d0d 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -492,6 +492,7 @@ void intel_panel_set_backlight(struct intel_connector *connector, u32 level,
> enum pipe pipe = intel_get_pipe_from_connector(connector);
> u32 freq;
> unsigned long flags;
> + u64 n;
>
> if (!panel->backlight.present || pipe == INVALID_PIPE)
> return;
> @@ -502,10 +503,9 @@ void intel_panel_set_backlight(struct intel_connector *connector, u32 level,
>
> /* scale to hardware max, but be careful to not overflow */
> freq = panel->backlight.max;
> - if (freq < max)
> - level = level * freq / max;
> - else
> - level = freq / max * level;
> + n = level * freq;
32b * 32b = 32b
n = (u64)level * freq; to avoid overflow as you claim.
Also this still has the same rounding error as before.
-Chris
--
Chris Wilson, Intel Open Source Technology Centre
More information about the Intel-gfx
mailing list